Biofit ET Series Chairs

Chairs shipped in 72 hours or less
Simply choose quality BioFit chairs marked as Ship Now!
products, and they will be rolling toward your door within
72 hours (3 working days) or less! All Ship Now! chairs
require minimal assembly. Chairs will arrive via UPS or
BioFit’s choice of truck line. Quantities for Ship Now!
orders are limited up to 15 chairs per day, per customer.

How to Calculate Proper Seat Height.pdf

BioFit's 13 Year Chair Warranty

BioFit seating products are warranted against mechanical or structural failure due to defective material, workmanship, or abnormal wear for 13 years* of normal use. Pneumatic cylinders are covered for the functional lifetime of the chair or stool.

BioFit reserves the right to recondition or replace any units covered by this guarantee. Freight and any other consequential damages are not covered; all return shipments require written authorization and must be freight prepaid unless otherwise approved in writing. COM upholstery materials are not covered.

BioFit takes its warranty, repair and maintenance responsibilities very seriously. Efforts by unqualified personnel to perform repairs on seating products can result in dangerous conditions which can lead to serious bodily injury. Any attempt to modify, alter or make unauthorized repairs to BioFit products may not only seriously jeopardize the safety of the user, but will void this warranty in every respect.

*Intensive Plus™ seating warranted for 5 years.

Standard Features:
Backrest: 14" wide x 9 1/2" high, lumbar support, plastic protective panel.
Seat: Ergonomic, 18 1/2" wide x 17" deep x 3" thick with waterfall front, four-way contouring and internal seat board bumper guard.
Controls: Standard with Task Control -- Soft Touch pneumatic seat-height adjustment,
fixed rearward seat tilt of 3 1/2°, backrest tilt, backrest-height adjustment.
Base: Rugged 5-legged tubular steel base with 20" diameter attached foot ring, 23" leg spread.
Metal Parts: ETT Series chairs have a powder-coated finish as standard or a chrome plated finish when specified with a C option code.
Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other optional casters/glides are available.

TOP

Standard Features:
Backrest: 14" wide x 9 1/2" high, lumbar support, plastic protective panel.
Seat: Ergonomic, 18 1/2" wide x 17" deep x 3" thick with waterfall front, four-way contouring and internal seat board bumper guard.
Controls: Standard with Task Control -- Soft Touch pneumatic seat-height adjustment, fixed rearward seat tilt of 3 1/2°, backrest tilt, backrest-height adjustment.
Base: 5-legged cast aluminum base with 23" leg spread.
Metal parts: ETC Series chairs have a powder-coated finish as standard or a chrome plated finish when specified with a C option code (aluminum base has a polished top with the C option).
Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other optional casters/glides are available.

TOP

Standard Features:
Backrest: 14 1/2" wide x 9 1/2" high, lumbar support, plastic protective panel
Seat: Ergonomic, 18 1/2" wide x 17" deep x 3" thick with waterfall front, four way contouring and internal seat board bumper guard.
Controls: Standard with Task Control -- Soft Touch pneumatic seat-height adjustment, fixed rearward seat tilt of 3 1/2°, backrest tilt, backrest-height adjustment.
Base: 5-legged black reinforced composite base with 27" leg spread (26" caster to caster); not for ESD use.
Metal parts: ETN Series chairs have a powder-coated finish as standard or chrome plated metal parts when specified with a C option code (base remains black plastic with the C option).
Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other optional casters/glides are available.

FAX-IN ORDER FORM

Standard Features:
Backrest: 14 1/2" wide x 9 1/2" high, lumbar support, plastic protective panel.
Seat: Ergonomic, 18 1/2" wide x 17" deep x 3" thick with waterfall front,four-way contouring and internal seat board bumper guard.
Controls: Standard with Task Control -- Soft Touch pneumatic seat-height adjustment, fixed rearward seat tilt of 3 1/2°, backrest tilt, backrest-height adjustment.
Base: 5-legged fully polished cast aluminum base with 27" leg spread (26" caster to caster).
Metal parts: ETP Series chairs have a powder-coated finish as standard or a chrome plated finish when specified with a C option code.
Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other optional casters/glides are available.

Back

TOP