WireCrafters Woven Wire Lift Enclosures

Safe operation of vertical conveying systems requires an enclosure that protects employees from moving parts as well as spilled loads. WireCrafters Style 840 Partition System’s open mesh design prevents access to hazardous areas without blocking the operator’s view. Style 840 is strong enough to contain most load spills, protecting the operator and other personnel. Also protects people from the lift’s moving parts. Design your enclosure using standard modular parts. Control access to the lift with any of our hinged, sliding, tunnel, or vertical rise doors. Any door maybe outfitted with electric interlocks to shut down the system when opened. Doors may be outfitted with standard locks as well.
Free Shipping!
	Planning tips: • Size the enclosure by allowing three inches of clearance on all sides of the lift (mast plus platform). • Determine height of the enclosure. Choose between free standing units on each level, or one continuous unit that covers multiple levels. • Decide the type and locate the position of access doors to the platform. • A door for maintenance access to the mast and mechanicals may be desired. • All doors should have latching hardware with knobs on both sides. • Doors can be supplied with inter-lock mounting plates.
Features: Twenty standard sized panels 4' 0" or 5' 0" high by 1' 0" to 10' 0" wide. Custom size panels and special heights available. Stack two or more panels between posts to reach wall height. Standard size panels work in ceilings and walls. Hinged, double hinged, sliding, and vertical rise gates available. Sliding doors have patented tamper resistant latch mechanism. Panels may be ordered with any mesh, expanded metal, sheet metal, or clear Lexan
Architectural Specifications.pdf	Request for Quote
Fast Delivery Three warehouses to serve you: * Louisville, Kentucky * Philadelphia, Pennsylvania * Reno, Nevada 48 Hour Quick Ship * Stocked parts from any warehouse. Five Day Fast Track * Stock parts with minor modifications. Ten Day Shipment * Special and all custom orders.
WireCrafters Style 840 Woven Wire Partitions MATERIAL SPECIFICATIONS

PANELS (Panels) Shall be 10gauge steel wire crimped and woven in to 2" x 1" opening rectangular mesh, securely welded into a frame of 1-1/4" x 1-1/4" x 1/8" steel angle factory punched with 7/8" x 7/16" slotted holes to accept 3/8" mounting hardware. Panels four to six feet wide shall have one 1/4" x 3/4" flat stiffener, wider panels receive two 1/4" x 3/4" stiffeners. All panels shall be fastened to posts with 3/8" x 3" plated bolts and nuts. DOORS - Hinged (Types of Doors) shall be constructed of the same materials as the panels with two 1/4" x 3/4" horizontal stiffeners across the width, and two diagonal 1/4" x 3/4" stiffeners from center to the corner. Hinged doors shall be equipped with padlock lugs (cylinder lock optional), three 4" x 4" spun pin hinges, and pick plate/slam bar assembly. DOORS - Sliding (Types of Doors) shall be constructed of the same materials as the panels with two 1/4" x 3/4" horizontal stiffeners across the width, and two vertical 1/4" x 3/4" stiffeners from center to top or bottom. Sliding doors shall be equipped with two 4 wheel trolley trucks, 1-7/8" x 2-3/8" door track, pad lock lugs (cylinder lock optional), and door keeper assembly. POSTS - Shall be made of 2" x 2" x 14 gauge steel tubing. Base plates of 2" x 7" x 1/4" steel flat with two 7/16" round holes for anchoring, shall be welded to each tube. Posts are factory drilled with 1/2" holes to accept hardware for mounting panels. HARDWARE - Shall be 3/8" standard thread grade two plated nuts and bolts. Floor anchors are 3/8" wedge type-provided. FINISH - Non-plated parts receive one coat of gray acrylic enamel. Touch up paint included with each shipment. Interlock: A physical barrier for any robotic work cell requires safety interlock switches at each opening. WireCrafters can supply a barrier with plates to mount your own interlocks, or you can take advantage of our relationship with Fortress Interlocks and purchase a barrier with Fortress Interlocks integrated into the system. Through Fortress, WireCrafters offers a complete line of modular safety gate switch interlocks, which meet safety standards for a variety of application.
	You may select from: amGuard Safety Switch-an electro-mechanical solution that works for most any safeguarding application. Its modular construction allows easy configuration. mGuard Key Interlocks-trapped key interlocks for mechanically guarding hazardous machines and processes-suitable for category 4 (EN 954-1) applications. eGuard Access and Control Switches-this modular system combines mechanical trapped key interlocks, electrical safety gate switch interlocks and electrical operator controls, either as separate devices or integrated into one device to control access to hazardous machinery and equipment
Back	TOP

Secure On Line Ordering

Material Handling Solutions Since 1978
Custom Equipment Company, Inc. Copyright © 2010. All rights reserved
Toll Free: 866-333-0728 | e-mail: sales@custommhs.com | Fax: 919-847-5765