WireCrafters Woven Wire Lockers |
 |
Providing WireCrafters Products for 30 years. |
WireCrafters Woven Wire Lockers From Custom Equipment Company |
| WireCrafters' all steel welded wire storage lockers are an ideal way to secure resident's personal items in multi-family building common storage areas. RapidWire’s welded mesh construction is strong and secure. Plus, it gives installers more flexibility to custom fit and professionally finish your storage area, eliminating clutter, and efficiently using available space. The locker's open but secure design allows existing lighting, ventilation and fire suppression systems to function effectively throughout the secured areas. |
WireCrafters Wire Lockers.pdf Installation Guide.pdf Request for Quote
| Features: Welded mesh allows field modifications for unforeseen obstructions. Two basic styles, single or double tier. Stock sizes: 7' 6" tall, 3' or 4' wide, 3', 4', or 5' deep. Non-stock sizes available. Pad lock lugs, with door strikes standard. Three point lock or recessed key lock available. Constructed of industrial grade materials. May be used individually or in a group. Styles may be mixed within a group. Easy installation-just two sections per locker, wall panel and door panel. Free Layout service-sketch the room, and tell us the desired number of lockers. Approval and Erection drawings supplied with your order. All frames, dividers, and angle supports shall be punched with slotted holes for anchoring and assembly. Welded wire mesh shall be securely welded to all frames. |
DOOR PANELS - Shall be framed in 1-1/4" x 1-1/4" x 13 gauge angle with doors pre-hung at the factory. Single tier doors constructed with two diagonal and one horizontal stiffener of 1/4" x 3/4" flat bar behind mesh securely welded into a 1-1/4" x 1-1/4" x 13 gauge steel angle frame. Double tier doors shall have a single diagonal stiffener behind the mesh. All doors supplied with door strikes, padlock lugs, and 2-1/2" x 2-1/2" WALL PANELS - Shall be framed on three sides with 1-1/4" x 1-1/4" x 13 gauge steel angle, with double border wires on the remaining side. WIRE MESH - Shall be made of 10 gauge carbon steel wire welded in a 2" x 2" (center to center) pattern. DIVIDERS - Shall be formed16 gauge galvanized sheet metal fastened to a 1-1/4" x 1-1/4" x 1/8" angle support. Divider provided with double tier units; optional on single tier units. BACKS (Optional) - Shall be 20 gauge galvanized sheet metal. TOPS (Optional) - Sized to cover one or more lockers, shall be a sheet of 2" x 2" x 10 gauge welded wire mesh securely fastened to locker. BOTTOMS (Optional) - Shall be formed 16 gauge galvanized sheet metal. HARDWARE - Shall be 3/8" standard thread grade two plated nuts and bolts; 3/8" mechanical anchors for wall and floor mount-provided. FINISH - All non-plated parts shall receive one prime coat of gray enamel. |
Back |
Material Handling Solutions Since 1978
|
Custom Equipment Company, Inc. Copyright © 2010. All rights reserved
|
 |
Become a Fan  |
 |