Custom Equipment Company has partnered with WireCrafters in order to bring our customers the highest quality wire partition available. Wire partitions can secure valuable products and equipment. We are capable of creating wire partitions of varying sizes and strengths from warehouse partitions, DEA certified enclosures, Military storage units to law enforcement detention cells.

Request a Quote



SIMPLE WireCrafters modular system utilizes twenty standard panels to accomplish nearly any layout. These panels simply bolt between posts. Drawings provided with each order make installation easy enough for your own personnel.

STRENGTH Panels bolt to posts which have welded base plates for direct anchoring to the floor; no brackets or shoes to come loose.

FAST The 840 system installs as fast or faster than any other system on the market. Our angle frame panels with slotted bolt holes give clear access to assembly hardware and allow fine tuning adjustments without compromising



Request a Quote






Style 840 panels are 1' to 10' wide, and 4' or 5' high. Full height partition walls are built by stacking two or more panels between standard posts. Posts are configured for a standard 3 1/4" sweep-space, and project 2" above the panels. Our standard panels can be used in ceilings or walls. Stack panels to any height by extending the length of the post. Flush to the floor partitions can be made by modifying the post's standard hole layout. POSTS
  • Stock sizes: 8'-5 1/4", 10' -5 1/4", and 12' -5 1/4"
  • Standard hole layout allows for 3 1/4" sweep-space.
  • Posts project 2" above top of panel.
  • Standard base plate: 2" x 7" with holes for anchors.
  • Special length posts are available to 40'.
  • Oversized base plates are available.
  • Floor anchors (3/8") are included with your order


Request a Quote



WOVEN WIRE PANELS
  • Ten widths: 1'-0" to 10'-0" in one foot increments
  • Two heights: 4'-0" and 5'-0"
  • Standard Mesh: 10 gauge (.135) wire woven into 2"x1" rectangular opening (other mesh available)
  • Standard Frame: 1 1/4" x 1 1/4" x 1/8" steel angle.


ADJUSTABLE PANEL
For hard to measure areas; use our sheet metal adjustable panel. It allows for partition width adjustments from 1" to 12".

Request a Quote



CEILINGS
  • Use same panels as walls.
  • Attach to partition walls with slotted angle.
  • Clear spanned up to 35'.
  • Large ceilings supported by 2" square horizontal ceiling tubes.
  • Add to existing partition without changing layout.
  • All ceilings are non-load bearing


Request a Quote