MECO AU12 Single Sided Cantilever Add-on Rack Unit

The MECO Single Sided Cantilever Add-on Unit, Model AU12, is a Series 4000 heavy-duty cantilever rack system designed to provide a complete storage bay for long, bulky, or irregular materials. This add-on unit includes the key components needed to create a functional cantilever rack section and is well-suited for placement against a wall or along the perimeter of a storage area. The arms adjust on 3 in centers and use a hairpin keeper for fast, simple height changes. Straight arms are available with or without a lip and include a minimum pitch of 3/8 in per foot to help compensate for deflection under evenly distributed loads.

Specifications:
Model Numer AU12
♦ Upright Height: 12’-0”
♦ Upright Capacity: 12,500 pounds
♦ Base Length: 61”
♦ Brace Set:  72” measured from the center of the upright to the center of the next upright.
♦ Number of Straight Arms: 8
♦ Arm Length:  48” long and adjustable on 3” centers and uses a hairpin keeper for fast, simple height changes.
♦ Arm Capacity: 1,000 pounds each. Caution: Don’t exceed the upright capacity.
♦ Straight arms are available with or without a lip.
♦ STRAIGHT ARMS have a minimum pitch of 3 /8" per foot to compensate for deflection. Arm capacities are based on an evenly distributed load.
♦ Standard finish is gray. Custom colors are available for an additional cost.
♦ Product image is for illustration purposes only. The actual number of arms may vary depending on the selected unit or configuration.

Why Use This Product:
Use the Single-Sided Cantilever Add-on Unit when you need a strong, organized, and flexible storage solution for standard heavy-duty industrial storage requirements. A cantilever rack is ideal for materials that are difficult to store on standard pallet racks or shelving, including pipe, tubing, conduit, lumber, bar stock, trim, panels, steel, and other long or awkward inventory. The open-front design makes loading and unloading easier, while the adjustable arms allow you to reposition your storage levels as product sizes change. With its single-sided layout, this rack helps make efficient use of wall space while keeping materials accessible and properly supported.

How It Helps Your Operation:
This helps your operation improve material flow, reduce floor clutter, and create a safer, more efficient storage area. By keeping long and bulky items stored off the floor and organized by size, type, or usage, your team can find materials faster and reduce product damage caused by poor stacking or overcrowded storage areas. The adjustable arm design makes it easier to adapt the rack as your inventory changes, while the starter unit format gives you a complete first bay that can be expanded with compatible add-on units. Always load arms evenly and do not exceed upright capacity when configuring the system.

Watch Product Video