WireCrafters Guardrail System

WireCrafters Guardrail System

Install WireCrafters Guardrail in your plant to protect people, production area, loading docks, racks, compressors, machinery, and property from accidents involving forklifts, sweepers, or other moving facility equipment. WireCrafters GuardRail was designed and tested to withstand the impact of a 10,000 pound load moving at 4 miles per hour. WireCrafters GuardRail protective railing system helps to prevent damage to equipment or facilities by providing a strong barrier along aisle ways or in front of expensive or critical equipment. Create a safety barrier with our competitively priced guard rail system and save the expense of costly downtime repairs by preventing accidents and damage. Prevent damage to equipment or facilities by providing a strong barrier along aisle ways or in front of expensive or critical equipment. 
Use starters and add-ons to create virtually any size you need.
Post are made of 4" square x 1/4" wall structural steel tubing, with 10" square x 1/2" thick steel base plates securely welded to the post and metal cap. Post shall have 9/16" holes drilled at the factory to accept rail mounting hardware. Single rail post are 17" high, double rail post 43" high. Post shall be centered on base plates with four 7/8" holes for anchoring to the floor. Finish: durable powder coat safety yellow.
Rails: All rails shall be formed from double "V" pattern, 11 gauge steel free from burrs and surface defects, with 3 1/2" x 13" x 1/4" steel end plates securely welded to each, mounting hardware provided. Finish: durable powder coat safety yellow.
Hardware: Rails mount to columns with 1/2" x 5" through bolts. Columns anchor to floor with 3/4" x 4-1/4" wedge type anchors. Assembly hardware provided.

WireCrafters Guard Rail.pdf

 

 

 

 

 

 

WireCrafters Pre-Configured Guardrail Sections

wirecrafters guard rail

WireCrafters Heavy Duty Single High
Pre-Configured Sections

guardrail

wirecrafters fencing

WireCrafters Heavy Duty Double High
Pre-Configured Sections

guardrail
 

WireCrafters Guardrail Components

guard rail

WireCrafters Heavy Duty Components
Guardrails Railing and Post

 

wirecrafters

 

 

guardrail guardrail
guardrail guardrail
WireCrafters wirecrafters

 

GuardRail Styles & Sizes
WireCrafters GuardRail protective railing system comes in two styles; Single or Double Rail. The single guard rail columns are 17" high, where double guard rail columns are 43" high. All GuardRail columns are 4" square x 1/4" wall structural steel tubing with metal caps, and 10" square x 1/2" thick steel base plates. The base plates have four 7/8" round anchor holes, and the floor anchors are provided. Custom guard rail heights are available. All GuardRail columns are powder coat painted safety yellow.
Rail Lengths
The 11 gauge formed steel rails come in standard lengths (0'-8", 1'-8", 2'-8", 3'-8", 4'-8", 5'-8", 6'-8", 7'-8", 8'-8", and 9'-8") to reach even foot increments center to center of each column. Custom guard rail lengths are also available. Rails mount to the columns with 1/2" x 5" through bolts. All rails are powder coat painted safety yellow
Columns
All columns shall be made of 4" square x 1/4" wall structural steel tubing, with 10" square x 1/2" thick steel base plates securely welded to the column, and metal cap. Uprights shall have 9/16" holes drilled at the factory to accept rail mounting hardware. Single rail columns are 17" high, double rail columns 43" high. Column uprights shall be centered on base plates with four 7/8" holes for anchoring to the floor. Column uprights with offset base plates may have three holes for anchoring to the floor.
Rails
All rails shall be formed from 11 gauge steel free from burrs and surface defects, with 3 1/2" x 13" x 1/4" steel end plates securely welded to each. Custom lengths available.
Options
Rail Lift Out kits, offset column base plates, and corner offset columns are available.
Hardware
Rails mount to columns with 1/2" x 5" through bolts. Columns anchor to floor with 3/4" x 4-1/4" wedge type anchors. Assembly hardware provided.
Finish
Posts and rails are powder coat yellow.
Quick & Easy Installation
GuardRail components bolt together and column base plates are anchored to the floor. All necessary hardware is included with your order.
How to install WireCrafters Guardrail.pdf