Lift Products LPBL-20-2-LS Low Profile Lift-N-Spin Scissors Lift Table

  • Lift Products LPBL-20-2-LS Low Profile Lift-N-Spin Scissors Lift Table
  • List Price: $9,364.09

    Our Price: $6633.00

    You Save: $2,731.09 (29.17 %)

    Larger Quantities: Use Quote Form

  • Availability:

Lift Products LPBL-20-2-LS Low Profile Lift-N-Spin Scissors Lift Table

Lift Products LPBL-20-2-LS Low Profile Lift-N-Spin Scissors Lift Table with a lowered height of only 4.25", The Lift-N-Spin can be loaded with a manual or electric pallet truck. This is accomplished by the exclusive auto-transition plate which provides a smooth surface from the ramp onto the rotating top. Once the lift is raised 1/4" the plate automatically lowers to allow the spinning of the rotating top. When the table is fully lowered, the plate automatically raises again to provide a smooth surface to load the next pallet. The Lift-N-Spin has a raised height of 35" providing an ideal height for work positioning applications. The rotating top avoids the need to walk around or reach across. The Remote Power Unit features a 1 HP motor. This is a highly efficient and quiet pump motor combination. A three-button control box has 115-volt single phase and runs on a 20 amp circuit. 230/460 3 phase is optional.

♦  Platform Size: 45" diameter
♦  Capacity: 2,000 pounds.
♦  Lowered height: 4-1/4" and 35" raised height. 
♦  Lift Speed: 18 seconds. 
♦  1-HP Motor.
♦  Meets and exceeds both U.S. (ANSI) and European safety standards

♦  Upper platform safety perimeter bar prevents descent on contact
♦  Electric circuit reset button in case the safety perimeter is actuated
♦  Low-tension (24V) control box with up-down buttons
♦  External power pack equipped with a relief valve against overloading
♦  Remote Power Unit supplied with 8' long hoses
♦  Compensated flow valve for controlling lowering speed
♦  Mechanical blocks for safe maintenance operations
♦  115 voltage single phase standard
♦  Upper limit switch
♦  Single acting cylinders with drainage system and check valve
♦  Safety clearance between scissors to prevent trapping during operation
♦  Self-lubricating bushings on pivot points
♦  Removable lifting eye(s) to facilitate handling and installation

Imagem

 

Watch Product Video

Platform Size: 45" diameter ♦ Capacity: 2,000 pounds. ♦ Lowered height: 4-1/4" and 35" raised height. ♦ Lift Speed: 18 seconds. ♦ 1-HP Motor. ♦ Meets and exceeds both U.S. (ANSI) and European safety standards ♦ Upper platform safety perimeter bar prevents descent on contact ♦ Electric circuit reset button in case the safety perimeter is actuated ♦ Low-tension (24V) control box with up-down buttons ♦ External power pack equipped with a relief valve against overloading ♦ Remote Power Unit supplied with 8' long hoses ♦ Compensated flow valve for controlling lowering speed ♦ Mechanical blocks for safe maintenance operations ♦ 115 voltage single phase standard ♦ Upper limit switch ♦ Single acting cylinders with drainage system and check valve ♦ Safety clearance between scissors to prevent trapping during operation ♦ Self-lubricating bushings on pivot points ♦ Removable lifting eye(s) to facilitate handling and installation

There are no related accessories for this product.

Model Information
Want to be sure you’re paying the lowest price?
We guarantee it.

We are making everything possible to provide you the best products on the lowest prices possible. Due to the higher number of products in our store we think that is possible some of the prices on our products to not be accurate.


If you find one of our products with lower price than ours, please use this form. We will compare the prices and will offer you the product on the same price!


Here’s how it works:

1. Found a cheaper price?
2. Ask us for a price match - Just fill out the form and we’ll check the details.

Please fill in the form below: * Required fields
* Your Name:
* Your Email:
* Price in other store:
Our price: $6633.00
* Link to the product:
Comments (optional):