Talk to an Expert: 866-333-0728
No bots. No guesswork. Real experts.

  • Your shopping cart is empty!

Menu

Little Giant Heavy Duty Pipe Stake Truck

Imagem

Little Giant Heavy Duty Pipe Stake Truck, Long Material Transport Cart

The Heavy Duty Pipe Stake Truck features a 6-wheel design for enhanced stability and weight distribution, making it more effective at carrying heavy or oversized loads than standard trucks. This increased capacity improves operational efficiency by reducing the number of trips needed to transport materials. The truck's versatility makes it a valuable asset in any setting where long, bulky, or heavy materials need to be transported safely and efficiently, with an adaptable design that ensures practical solutions for handling challenging loads across various industries.

Six configurations are available across four sizes, all rated at 4,000 lb capacity.

Models and Specifications:

♦ DT-2448-DIA-4PS, 24" wide x 48" long. 6" polyurethane casters, 4 swivel. Capacity 4,000 lbs. Six-wheel design.

♦ DT-3048-DIA-4PS, 30" wide x 48" long. 6" polyurethane casters, 4 swivel. Capacity 4,000 lbs. Same construction and features as DT-2448-DIA-4PS at a greater width.

♦ DT-3060-DIA-4PS, 30" wide x 60" long. 6" polyurethane casters, 4 swivel. Capacity 4,000 lbs. Same construction and features at greater length.

♦ DT-3072-DIA-4PS, 30" wide x 72" long. 6" polyurethane casters, 4 swivel. Capacity 4,000 lbs. Same construction and features at greater length.

♦ DT-3660-DIA-4PS, 36" wide x 60" long. 6" polyurethane casters, 4 swivel. Capacity 4,000 lbs. Same construction and features at greater width.

♦ DT-3672-DIA-4PS, 36" wide x 72" long. 6" polyurethane casters, 4 swivel. Capacity 4,000 lbs. The largest model in this lineup.

Selecting the Right Model:

♦ Size: from 24"x48" up to 36"x72", select based on the length and bundle size of pipe, tubing, or bar stock being transported and the available floor and aisle space.

♦ Six-wheel stability spreads weight across more contact points than a standard four-wheel truck, improving control and reducing floor strain when carrying long or heavy loads.

♦ Reducing trip count, the higher 4,000 lb capacity lets facilities move more material per run, cutting down on repeated trips between storage, staging, and work areas.

Where Commonly Used:

♦ Warehouse and Fabrication Shop Material Transport: Warehouses and fabrication shops use this truck to move pipe, conduit, and mechanical tubing between receiving, storage, and cutting stations.

♦ Construction Staging and Mechanical Room Access: Construction staging areas and mechanical rooms use this truck to move long stock through tight corridors and job sites.

♦ Maintenance Pipe and Repair Material Transport: Maintenance teams use this truck to move pipe runs and repair materials across a facility.

♦ Bundled Stock and Structural Shape Handling: Facilities handling bundled trim, dowels, rod, or structural shapes use this truck's high capacity to move more material per trip.

CustomMHS is an authorized Little Giant distributor. All purchases include the manufacturer's factory warranty.

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number Deck Size Caster Type Load Capacity Price View Model
24" wide x 48" long
6" Polyurethane (4 swivel)
4,000 pounds
$713.86
30" wide x 48" long
6" Polyurethane (4 swivel)
4,000 pounds
$769.48
30" wide x 60" long
6" Polyurethane (4 swivel)
4,000 pounds
$826.14
30" wide x 72" long
6" Polyurethane (4 swivel)
4,000 pounds
$854.99
36" wide x 60" long
6" Polyurethane (4 swivel)
4,000 pounds
$860.13
36" wide x 72" long
6" Polyurethane (4 swivel)
4,000 pounds
$901.33

Frequently Asked Questions (FAQs)

What is the Little Giant Heavy Duty Pipe Stake Truck designed to handle?
The Little Giant Heavy Duty Pipe Stake Truck is built for moving long, heavy materials inside a facility. It supports pipe, conduit, tubing, and bundled stock that is awkward on flat platform trucks. Stake sides help keep loads aligned and reduce rolling during travel. Because it is heavy duty, the frame is designed for repeated runs and tough handling. Facilities use it to move materials between receiving, storage racks, and work cells without relying on forklifts for every trip.
How does the 6-wheel design improve stability and control?
A six-wheel layout spreads weight across more contact points, which improves balance under long loads. That stability helps the truck track straighter and reduces tip risk when turning or crossing small floor gaps. Better weight distribution can also lower floor wear compared with concentrated loads on fewer wheels. For operators, the extra wheels can make starts and stops feel more controlled with heavy pipe bundles. The result is fewer corrective pushes and fewer dropped or shifted items during transport.
Which features matter most when selecting a heavy duty pipe stake truck?
Look at the stake design first, since it controls how well the load stays centered. Adequate stake height and spacing help contain pipe while still allowing quick loading. A reinforced frame and secure welds matter when the truck sees daily impacts at doorways and racks. Wheel quality affects push effort, so check for heavy duty casters and bearings suited for your floor surface. Handle geometry and deck height influence control, especially in narrow aisles or crowded staging areas.
What are typical materials and industries that use the Heavy Duty Pipe Stake Truck?
In warehouses, the Heavy Duty Pipe Stake Truck is commonly used for inbound pipe and conduit staging. Fabrication shops use it to feed saws, benders, or welding stations with cut lengths and bundles. Maintenance teams use it for moving repair stock through corridors and mechanical rooms. Construction and HVAC crews often use it to move long materials around a site shop or staging bay. Typical loads include steel, PVC, copper pipe, plus bar stock, strut channel, and long boxed parts.
What are practical tips for safe, efficient daily use in your facility?
Load the truck with the heaviest pieces low and centered to keep steering predictable. Use straps or bands when needed, especially if the material is slick or round. Plan your route to avoid steep ramps, tight turns, and cluttered aisles that force sudden corrections. Inspect wheels and fasteners on a schedule, since worn casters can increase push force and drift. With basic upkeep, the truck stays reliable for moving long loads day after day.
Is the manufacturer’s warranty included with my purchase?
Yes. All products sold on CustomMHS.com include the original manufacturer’s warranty unless otherwise noted. Custom MHS is an authorized dealer for the brands we carry, which means your purchase is covered by the manufacturer's full factory warranty.
Do you offer bulk pricing or discounts on large orders?
Yes. Many products include automatic quantity price breaks. If you’re outfitting a facility or placing a larger order, email us for project pricing. We can often provide improved volume pricing and help coordinate logistics for staged deliveries or multi-location shipments. Contact: [email protected]
Why purchase from CustomMHS.com?
CustomMHS.com supports manufacturing and distribution operations that need equipment that fits right the first time. We specialize in storage and material handling and help you select the correct configuration upfront to avoid errors that cause delays, reorders, and costly downtime. To make price comparisons simple and fair, we reference the manufacturer’s model number on our listings and quotes whenever available. That way, you can compare the exact same item across suppliers apples to apples, so you can verify you’re getting the best deal without guessing whether the specs match.

Built for Manufacturers, Warehouses &
Industrial Facilities

CustomMHS is an authorized distributor of industrial storage and material handling equipment for manufacturers, warehouses, distribution centers,
and industrial facilities across North America. From shelving systems and pallet racking to storage containers, workbenches, carts, security fencing, and cabinets,
we carry industrial-grade brands and help you choose the right specs, load ratings, and configuration for your facility, workflow, and space before you order.