Jamco 2-Shelf ST-Series Industrial Service Cart

The Jamco ST-Series Industrial Service Cart features a flush front edge and two locking drawers, making it well suited for repair and maintenance work where secure tool storage matters. Twelve-gauge steel shelves, 3/16" thick angle corners, and 12-gauge caster mounts provide the structural strength needed for demanding daily industrial use.

Capacity depends on caster type: 5" polyurethane and 5" thermorubber casters both support the standard 34" height, while 8" full pneumatic casters increase overall height to 38" with the added shock absorption of air-filled tires for rougher floor conditions. Six configurations are available across two sizes and three caster types.

Models and Specifications:

♦ ST236-U5, 24"W x 36"L x 34"H. 5" polyurethane casters. Capacity 1,200 lbs. Flush front edge. Two locking drawers.

♦ ST236-T5, 24"W x 36"L x 34"H. 5" thermorubber casters. Capacity 800 lbs. Same construction and features as ST236-U5 with thermorubber casters.

♦ ST236-N8, 24"W x 36"L x 38"H. 8" full pneumatic casters. Capacity 1,200 lbs. Taller model with added shock absorption for rougher floor conditions.

♦ ST348-U5, 30"W x 48"L x 34"H. 5" polyurethane casters. Capacity 1,200 lbs. Same construction and features as ST236-U5, but larger.

♦ ST348-T5, 30"W x 48"L x 34"H. 5" thermorubber casters. Capacity 800 lbs. Same construction and features in a larger size, with thermorubber casters.

♦ ST348-N8, 30"W x 48"L x 38"H. 8" full pneumatic casters. Capacity 1,200 lbs. Largest model with full pneumatic shock absorption.

Selecting the Right Model:

♦ Caster type and capacity, 5" polyurethane and 8" full pneumatic casters both provide 1,200 lb capacity; 5" thermorubber casters rate at 800 lb. Full pneumatic casters add shock absorption for rougher floors at the cost of increased overall height.

♦ Locking drawer security: the two standard locking drawers secure tools and small equipment during repair and maintenance tasks, supporting better tool control in shared work areas.

♦ Size, 24"x36" or 30"x48", select based on the footprint of tools and materials required for the maintenance tasks being performed.

Where Commonly Used:

♦ Maintenance and Repair Operations, maintenance teams performing repairs throughout a facility use the standard locking drawers to secure tools and parts while transporting everything needed for the job to the work site.

♦ Equipment Service and Technician Tool Security, service technicians requiring secure, mobile tool storage use the built-in locking drawers to protect specialty tools and equipment during transport between job locations.

♦ Rough Floor Maintenance Environments, maintenance operations on rough or uneven floor surfaces use the 8" full pneumatic caster option for smoother rolling and reduced vibration transmission to tools and equipment.

♦ Shared Maintenance Shop Tool Control: shared maintenance shops with multiple technicians use the locking drawer storage to maintain tool accountability and reduce loss in high-traffic work areas.

CustomMHS is an authorized Jamco distributor. All purchases include the manufacturer's factory warranty.