Eagle Group Wall Mounted Stainless Steel Shelf

Eagle Group Wall-Mounted Stainless Steel Shelf | 14-Gauge Brackets, Marine Edge, 200 lb

The Eagle Group wall-mounted stainless steel shelf provides a fixed stainless work surface or storage shelf that mounts to the wall, freeing up floor space underneath for rolling carts, cabinets, or cleaning access. All units are constructed from 304 stainless steel and mount via 14-gauge stainless steel wall brackets. A standard marine edge on all models contains spills and provides a clean perimeter. The brackets include a hole for routing electrical wires when the shelf is used in a work position that requires electrical access.

Shelf height is adjustable within a 1" range (35-1/8" to 36-1/8") via the bracket mounting. Capacity is 200 lbs per shelf. All three models are 30" wide (front-to-back). Two models use 3 brackets; the 72" long model uses 4 brackets for additional support at the longer span.

Models and Specifications:

♦ WT3048-14-304-SEM-BS, 30" W, 48" L, 35-1/8" to 36-1/8" H. 304 stainless steel, 14-gauge brackets (3), marine edge, electrical wire routing hole. 200 lb capacity.

♦ WT3060-14-304-SEM-BS, 30" W, 60" L, 35-1/8" to 36-1/8" H. 304 stainless steel, 14-gauge brackets (3), marine edge, electrical wire routing hole. 200 lb capacity.

♦ WT3072-14-304-SEM-BS, 30" W, 72" L, 35-1/8" to 36-1/8" H. 304 stainless steel, 14-gauge brackets (4), marine edge, electrical wire routing hole. 200 lb capacity.

Selecting the Right Length:

♦ 48" long, the most compact option. Suited for tighter wall spans or applications where a shorter work surface is adequate, and floor clearance underneath is the primary need.

♦ 60" long, a mid-length option providing more lateral work surface than the 48" while still using 3 brackets.

♦ 72" long, the longest option in the lineup. Uses 4 brackets for additional support across the longer span. Choose the 72" when maximum wall-mounted work surface is needed.

♦ All models are 30" wide (front to back), which provides a comparable depth to a standard worktable for most food service and lab applications.

Where Commonly Used:

♦ Commercial Kitchens and Food Service Prep Areas, commercial kitchens use wall-mounted stainless shelves to create fixed prep surfaces above floor level, keeping the floor underneath clear for rolling equipment and simplifying cleaning. The marine edge is prone to spills, and the 304 stainless surface withstands washdown cleaning protocols.

♦ Laboratories and Research Environments, laboratory environments use wall-mounted stainless shelves as auxiliary work surfaces alongside benches for instruments, trays, and equipment without expanding the floor footprint. The 304 stainless steel resists laboratory chemicals and disinfectants.

♦ Food Processing and Cleanroom Production: food processing lines and cleanroom production environments use wall-mounted shelves to position equipment and supplies at the work position without obstructing floor-cleaning paths or introducing floor-contact surfaces.

♦ Healthcare and Sterile Processing Areas, hospital sterile processing departments, and procedure support areas use wall-mounted stainless shelves for sanitary, fixed-position supply staging that can be wiped down or sprayed without concern for wall or floor drainage.

CustomMHS is an authorized Eagle Group distributor. All purchases include the manufacturer's factory warranty.