Hallowell 5527 Hi-Tech Bin Storage Shelving – 36 Openings

Hallowell 5527 Hi-Tech Bin Shelving | 36 Openings, (32) 9"x9" and (4) 9"x12"

The Hallowell 5527 bin shelving unit provides 36 openings per unit in a mixed-height layout: (32) openings at 9" wide x 9" high and (4) openings at 9" wide x 12" high. All 36 openings share the same 9" width. The four taller 9" x 12" positions are located on the bottom shelf and accommodate slightly bulkier items that do not fit in the standard 9" height. The remaining 32 positions at 9" x 9" provide high-density storage for smaller parts across the upper shelves.

The 5527 offers 71% more positions per unit than the 5526 (36 vs. 21) by stepping down from 12"-wide to 9" wide openings. It is the correct choice when stored items fit within 9" wide openings, and maximum position count per unit is the priority. All units are 36" wide x 87" high. Three depth options are available: 12", 18", and 24".

Starter units stand alone or begin a row. Add-on units share a side panel with an adjacent unit to extend the row.

Selecting the Right Depth:

♦ 12" depth, minimum floor footprint. Suited for items that do not require more than 12" of front-to-back clearance in a 9"-wide opening.

♦ 18" depth, standard depth for most 9"-wide bin applications. Accommodates the majority of small parts, hardware, and packaged items stored in 9" wide positions.

♦ 24" depth, maximum depth. Suited for items requiring more front-to-back space within the 9"-wide opening, or for higher per-opening volume.

♦ 5527 vs. 5526, choose 5527 when stored items fit within a 9"-wide opening and 36 positions are needed per unit rather than 21. Choose 5526 when items require the wider 12" opening.

♦ 5527 vs. 5528, both use 9"-wide openings. The 5528 uses 6" wide openings for a higher density. Verify opening size requirements against the actual items to be stored.

♦ Starter vs. add-on units: Order one starter unit per row. Add-on units share a side panel and cannot stand alone.

Where Commonly Used:

♦ Hardware and Fastener Stockrooms with Medium-Sized Items, stockrooms organizing medium-sized fasteners, bolts, fittings, and hardware that fit in 9" wide positions, use the 5527 for a high position count per unit with a mixed-height bottom shelf to accommodate the occasional larger item.

♦ Maintenance Parts and Consumable Storage, maintenance departments storing a wide variety of small to medium parts -- seals, clips, fittings, small components, and consumable supplies in 36 labeled positions per unit use the 5527 for dense, organized, visible storage in a manageable per-unit footprint.

♦ Electronics and Assembly Component Organization, electronics assembly areas storing resistors, connectors, terminal blocks, and small electronic components in 9"-wide bin positions, use the 5527 for the high position count that a large component variety requires within a single unit.

♦ Production Line Small Parts Kitting and Staging, production lines staging kitting components and small hardware in labeled 9" wide positions, use the 5527's 36-position layout to keep the full component set visible, accessible, and replenishable at the line without dedicated shelving for each individual part type.

CustomMHS is an authorized Hallowell distributor. All purchases include the manufacturer's factory warranty.