WireCrafters Super Strong Style 840 Wire Partitions | 10ga Woven Wire Panels

WireCrafters Super Strong Style 840 Wire Partitions - 10ga Woven Wire Panels

The WireCrafters Super Strong Style 840 Wire Partition System is built for facilities that need absolute security without sacrificing visibility, flexibility, or installation speed. These panels are engineered for strength from the ground up: 10 gauge woven wire in a 2" x 1" rectangular mesh, welded into a heavy hot-rolled angle frame, with stiffener bars added on larger panels for extra rigidity. Panels bolt directly to 2" square, 14-gauge steel tube posts using 3/8" hardware, then anchor to the floor with a welded base plate and provided anchors to create a robust, rigid partition line.

What raises the security level further is WireCrafters' inside-only hardware design. With fasteners accessible only from inside the cage, the system is substantially harder to tamper with from the outside, exactly what you want when protecting valuable inventory, equipment, tools, and controlled items.

WireCrafters manufactures 20 stock wire partition panels, ranging from 1 foot wide to 10 feet wide in 1-foot increments. Panels are 4 feet or 5 feet high and stack one on top of the other to build a tool crib either 8, 10, or 12 feet tall, with a variety of hinged or sliding door options in stock for 48-hour shipping. Security cages can also be equipped with ceilings, and ceiling and wall panels can be interchanged. Tool cribs and security cages can be designed in custom sizes and configurations.

Configuration Options Available:

♦ 1-Wall Configuration, designed to fit between 2 existing walls. Useful for securing aisles and rows of pallet racks.
♦ 2-Wall Configuration, designed to fit in a corner using two existing walls or stand as a free-standing.
♦ 3-Walls Configuration, designed to fit against existing walls or installed as a free-standing unit.
♦ 4-Walls Configuration, a fully enclosed unit, is available with or without a ceiling.

All configurations are available in 8'-5-1/4", 10'-5-1/4", or 12'-5-1/4" heights, with hinged, double-hinged, sliding, or vertical rise doors.

Selecting the Right Model:

♦ Wall configuration: choose based on how many sides of the enclosure need to be existing walls versus wire partition panels.
♦ Height: choose from 8, 10, or 12 feet based on ceiling clearance and the storage height needed.
♦ Door type: choose hinged doors for standard access, sliding doors for tight aisles, or vertical rise doors for overhead clearance needs.

Where Commonly Used:

♦ Tool Cribs and Maintenance Cages, secure enclosures, control access to tools and equipment.
♦ Warehouse and Manufacturing Storage Areas, wire partitions build free-standing, multi-use storage cages.
♦ Inventory Control Areas: secure enclosures that restrict open access to products requiring control.
♦ Custom Facility Layouts, standard and custom panel sizes fit a wide range of aisle and room configurations.

CustomMHS carries the full line of WireCrafters wire partitions, backed by the manufacturer's warranty.

Don’t see exactly what you need?
Click the Online Configurator in the Resources section to create a custom solution for your application.

WireCrafters 1-Wall Style 840 Woven Wire Security Fencing - Tool Crib Storage
	WireCrafters 1-Wall Style 840 Woven Wire Security Fencing They are designed to fit between 2 existing walls. It can be used to secure aisles and pallet rack rows and provide a secure barrier. Choose 8'-5-1/4", 10'-5-1/4", or 12'5-1/4" high partitions with hinged or sliding doors. Enclosures are secure as hardware is inaccessible outside the wire cage. 3/8" assembly hardware is used and is the heaviest in the industry.
WireCrafters 2-Walls Style 840 Woven Wire Security Fencing- Tool Crib Storage
	WireCrafters 2-Walls Style 840 Woven Wire Security Fencing They are designed to fit in a corner using two existing walls or to stand free-standing. Choose 8'-5-1/4", 10'-5-1/4", or 12'-5-1/4" high partitions with a hinged or sliding door. All panels and posts are numbered for easy assembly. Enclosures are secure, as hardware is inaccessible outside the wire cage. 3/8" assembly hardware is used and is the heaviest in the industry.
WireCrafters 3-Walls Style 840 Woven Wire Security Fencing- Tool Crib Storage
	WireCrafters 3-Walls Style 840 Woven Wire Security Fencing Designed to fit against existing walls or installed as a free-standing unit where needed. Choose 8'-5-1/4", 10'-5-1/4", or 12'-5-1/4" high partitions with hinged or sliding doors. All panels and posts are numbered for easy assembly. Enclosures are secure, as hardware is inaccessible outside the wire cage. 3/8" assembly hardware is used and is the heaviest in the industry.
WireCrafters 4-Walls Style 840 Woven Wire Security Fencing- Tool Crib Storage
	WireCrafters 4-Walls Style 840 Woven Wire Security Fencing Choose units with sliding or hinged doors with or without a ceiling. All panels and posts are numbered for easy assembly. For example, choose 8'-5-1/4", 10'-5-1/4", or 12'5-1/4" high partitions with hinged doors or sliding doors. All panels and posts are tagged with numbers for easy assembly. Enclosures are secure, as hardware is inaccessible outside the wire cage. 3/8" assembly hardware is used and is the heaviest in the industry.