Strong Hold Stainless Steel Countertop Cabinet with Drawer and Lockable Compartments

Strong Hold Stainless Steel Countertop Cabinets | Three Lockable Compartments, 1 Drawer

Strong Hold stainless steel countertop cabinets are wide-format stainless workbench units with three independently lockable compartments and a drawer built into a low-profile 31"-nominal-height base. The 7-gauge reinforced stainless top provides a heavy-duty work surface suited to food processing, pharmaceutical, lab, and cleanroom-adjacent positions where a stainless top and below-surface locked storage are both required. Each of the three compartments has its own 3-point locking system with a padlock hasp, allowing three users, shifts, or task categories to maintain independently secured storage within the same unit.

The 12-gauge stainless body and 7-gauge top resist corrosion from washdowns, cleaning agents, and the daily chemical exposure common to high-hygiene environments. Three widths are available: 84", 96", and 108". All models are 30" deep and 31" nominal height (34" OAH with 3" legs). The drawer and 3 shelves provide organized storage within the cabinet base. 

Models and Specifications:

♦ 73-WB-303-1DBSS, 84" wide x 30" deep x 31" high (34" OAH). 3 independently lockable compartments. 1 drawer. 3 shelves. 7-gauge stainless top. 12-gauge stainless body. 3-point locking with padlock hasp per compartment. 3" legs. 

♦ 83-WB-303-1DBSS, 96" wide x 30" deep x 31" high (34" OAH). 3 independently lockable compartments. 1 drawer. 3 shelves. 7-gauge stainless top. 12-gauge stainless body. 3-point locking with padlock hasp per compartment. 3" legs. 

♦ 93-WB-303-1DBSS, 108" wide x 30" deep x 31" high (34" OAH). 3 independently lockable compartments. 1 drawer. 3 shelves. 7-gauge stainless top. 12-gauge stainless body. 3-point locking with padlock hasp per compartment. 3" legs. 

Selecting the Right Cabinet:

♦ Width, 84", 96", or 108", the three widths each accommodate three equally divided lockable compartments across the full cabinet width. The wider the cabinet, the more lateral storage space per compartment. At 9 feet wide, the 108" model requires careful planning for delivery access and installation position. Confirm that the installation area can accommodate the full width plus adequate working clearance on each side before ordering.

♦ Three independently lockable compartments, each compartment has its own 3-point locking system and padlock hasp, operating completely independently from the other two. This allows each compartment to be assigned to a different user, shift, or task category, with no shared key access between compartments. This is the defining feature of this cabinet and the primary reason to choose it over a simpler single-lock stainless cabinet or workbench.

♦ 7-gauge reinforced stainless top; built to function as a work surface under significant load, not merely a shelf surface. The heavier gauge provides greater rigidity and impact resistance than the 12-gauge cabinet body, making the top appropriate for hands-on work, staging heavy equipment, or placing production fixtures directly above the stored items.

♦ 3" legs vs. 6" legs, the 3" legs on this countertop unit bring the work surface to 34" OAH slightly lower than the standard 34" to 36" ergonomic workbench height. This is appropriate for seated work positions or ergonomic applications where a slightly lower surface is preferred. Unlike the 6" welded-leg Strong Hold floor cabinets, the 3" legs do not provide forklift clearance for transport.

♦ Stainless countertop cabinet vs. standard stainless floor cabinet: The standard Strong Hold stainless floor cabinet is a full-height enclosed storage unit (78" OAH) with no work surface. This countertop cabinet is a low-profile unit (34" OAH) with an integrated work surface and independently locking below-surface storage. Choose the floor cabinet for maximum enclosed storage capacity. Choose this countertop unit when a stainless work surface with below-surface locked storage is the primary requirement.

Where Commonly Used:

♦ Food Processing Prep and Inspection Stations, food processing positions where workers need a stainless work surface above and locked ingredient, tool, or supply storage below with independent access control for each section of the bench; use this format to consolidate work surface and controlled storage in a single washdown-compatible stainless unit.

♦ Pharmaceutical Production Benches, pharmaceutical production and packaging positions requiring a stainless work surface with independently locked below-bench storage for controlled materials, precision instruments, and regulated supplies use this format to comply with sanitation and access control requirements simultaneously.

♦ Multi-User Shared Lab Benches: Lab positions shared by three users or three teams use the independently locking compartments to keep each user's supplies, samples, and instruments secured in their assigned section while sharing the common stainless work surface above.

♦ Quality Control and Inspection Benches: QC positions where inspectors work on the stainless surface and need organized, locked storage for reference samples, calibration standards, and documentation below. Use the compartmentalized format to keep each category of controlled material separated and independently secured.

♦ Cleanroom Support Gowning Benches, cleanroom-adjacent gowning areas where PPE, consumables, and controlled materials are staged below a stainless work surface for the gowning process, use the three-compartment format to separate categories of materials by type or by shift assignment.

CustomMHS is an authorized Strong Hold distributor. All purchases include the manufacturer's factory warranty.