WireCrafters Style 840 RapidWire Security Cage, 2-Wall

WireCrafters Style 840 RapidWire Security Cage (2-Wall), 10-Gauge Welded Wire, 2" x 2" Mesh, Modular Bolt-Together Panels

The WireCrafters 2-Wall Style 840 Medium-Duty Security Cage is a modular welded-wire partition system designed for fast, professional installation of tool cribs and security cages. Constructed from 10-gauge wire welded into a 2" x 2" square mesh, Style 840 provides strong perimeter security while remaining lighter and more open than woven wire or chain-link alternatives, improving visibility inside the secured area and keeping the space from feeling boxed in.

WireCrafters panels are fully framed, welded-wire sections that bolt together section by section, making installation straightforward. Most maintenance departments can install these partitions without special tools or equipment, using standard hand tools to bolt panels to posts. The modular design also makes it easy to build walls and ceilings using the same panel sizes, stacking panels to reach the height your tool crib requires, then adjusting later if your layout changes.

Door flexibility is built in, with options for hinged, double-hinged, and sliding doors to match traffic flow and access needs. The open yet secure design allows light, HVAC airflow, and fire suppression coverage to circulate and function normally throughout the secured space.

Selection Guide:

♦ Widths range from 6'-6" up to 30'-8", and depths range from 6'-4" up to 30'-8", available in a wide range of combinations, each offered with a Hinged door (3' or 4' wide) or a Sliding door (sized to the opening, from 3' up to 10' wide on the largest units).
♦ Model numbers follow the pattern RW[width][depth]H for Hinged (for example, RW8882H is 8'-6" wide x 8'-4" deep with a hinged door) or RW[width][depth]S for Sliding (for example, RW8882S is the same footprint with a sliding door).
♦ Larger footprints (roughly 22' x 22' and above) are only offered with Sliding doors, since a hinged door swing becomes impractical at that scale.

Selecting the Right Model:

♦ Footprint: choose the width and depth combination closest to your corner opening, from small setups around 6'-6" x 6'-4" up to large enclosures near 30'-8" x 30'-8".
♦ Door type: choose Hinged for standard swing-door access on smaller footprints, or Sliding when floor space in front of the opening is limited, or the footprint is large.
♦ Wall requirement: confirm you have two existing walls forming a corner before ordering; free-standing installations are also supported.

Where Commonly Used:

♦ Tool Cribs and Fast Storage Builds: the modular bolt-together design supports quick installation.
♦ Warehouses and Manufacturing Facilities, medium-duty welded mesh suits general secure storage needs.
♦ Maintenance Teams and Facility Expansions: standard hand tools allow installation without special equipment.
♦ Ventilated Secure Storage: the open mesh structure supports HVAC and fire suppression circulation.

CustomMHS carries the full line of WireCrafters RapidWire security cages, backed by the manufacturer's warranty.

Don’t see exactly what you need?
Click the Online Configurator in the Resources section to create a custom solution for your application.