Logitrans SELFSR 1003-47 Fully Powered Straddle Legs Rotator with Non-Adjustable Box Holder

The Logitrans Fully Powered Straddle Legs Rotator with Non-Adjustable Box Holder, model SELFSR 1003-47, is designed for efficient lifting, transporting, and rotating crates and boxes when handling boxes of different widths is not required. With powered drive and powered lift, this unit helps reduce manual effort while improving load control in warehouses, production areas, packaging lines, and distribution facilities. It offers a 2,200-pound capacity, a 47-inch lifting height, and fork options 22 inches wide by 49 inches long. The straddle-leg design adds versatility in work areas, while the digital controller and remote control allow operators to set tilt angle, rotation speed, and lifting functions with precision. This unit comes with forks and without clamps. Picture shown with optional clamps.

♦  Fork Size:  22" or 27" wide x 49" long
♦  Lifting Height: 47"
♦  Capacity:  2,200 pounds
♦  Powered Lift, Powered Drive
♦  Straddle Legs Design
♦  With Forks, without clamps

For fork size 22” OD, the non-adjustable box sizes are 31.5”, 33.5”, 37.8”, or 39.4”
For fork size 27” OD, the non-adjustable box sizes are 39.4”, 41.3”, 45.7”, or 47.2”

DURABILITY
♦  Low maintenance costs - no relays and wearing parts
SAFETY
♦  Tilting function is deactivated when the rotation center is more than 46,5" or less than 27" above the floor.
EFFICIENCY AND FLEXIBILITY
♦  Height adjustment, rotation, and transportation in the same unit
♦  Easy to set degree of tilt and rotation speed
♦  Precise and controlled acceleration/deceleration on rotation at start/stop
♦  Tilting function is deactivated automatically when rotating to the neutral position
♦  Remote control for rotation/lifting/lowering (with cable as standard/wireless as an optional extra)
DIGITAL CONTROLLER
♦  Large display – easy to use, easy visual presentation, touchscreen
♦  Possible to program, e.g., several stops, turning angle, speed, rotation
♦  Log function, e.g., operational time, current consumption, number of operations, overload registration, battery status
♦  Shows error messages and actual position/turning angle
♦  Supervisor function can be activated to lock the settings
OPTIONAL EXTRAS
Depending on the height and weight of the box and the working situation, one or two sets of box holders can be chosen:
♦  Box holders with clamps can hold boxes of heights between 15.4" and 37.5" when tilted (also 180°). 
♦  Box holders without clamps support the box (box holders with clamps are recommended when tilting more than 60°).
♦  Box holders are available for:
    ♦  Box widths of 31.5", 33.5", or 39.5" by a fork span of 22".
    ♦  Box widths of 39,5", 41,35", or 48" by a fork span of 27".
    ♦  Special arrangements for a maximum box width of 55" are possible.

Why Use This Product
This rotator is a smart choice for operations that want to improve ergonomics and operator safety when handling boxes and crates. Tilting the load allows workers to reach contents more easily without excessive stretching, bending, or back strain. The non-adjustable box holder setup is ideal for facilities with consistent box widths, and optional box holders can be selected based on load height, box width, and the required tilt. Safety is built into the design, including automatic deactivation of the tilting function when the rotation center is above 46.5 inches or below 27 inches from the floor, and when rotating back to the neutral position. Its low-maintenance construction with no relays and fewer wearing parts also helps reduce long-term service needs.

How It Helps Your Operation
In daily operations, the SELFSR 1003-47 streamlines material handling by combining transportation, lifting, and rotation into a single powered unit. Operators can use the large touchscreen display and standard cable remote to control lifting, lowering, and rotation with smooth acceleration and deceleration for better handling accuracy. The digital controller also provides valuable operating data, such as battery status, overload detection, error messages, operating time, and the number of operations, making it easier to monitor performance and maintain productivity. With available box holder options for multiple box widths and even special arrangements up to 55 inches, this rotator can support more efficient workflows, reduce physical strain on employees, and improve consistency in day-to-day handling of boxes and crates.

The non-adjustable box holder is particularly well-suited for handling standard-sized boxes or containers where uniform size is common. Its fixed size ensures stability and safety for these specific container dimensions. This equipment helps improve workplace ergonomics, enhance safety, and increase operational efficiency across various industries.

Watch Product Video