Hallowell Locker Base

Hallowell Closed Front Base and Closed Side Base

Hallowell Closed Front Base and Closed Side Base are fabricated of 16-gauge cold-rolled sheet steel, flanged on all four sides for rigidity. Front bases include projecting tabs on the side flanges that align with holes in the front legs, allowing them to be snapped into place without additional fasteners. Side bases are included at all exposed ends and are bolted to the front and rear legs. Finish matches the lockers. 6" high closed base.

Models and Specifications:

♦ KCFB12, Closed Front Base. 12" wide x 6" high.
♦ KCFB15, Closed Front Base. 15" wide x 6" high.
♦ KCFB18, Closed Front Base. 18" wide x 6" high.
♦ KCSB12, Closed Side Base. 12" deep x 6" high.
♦ KCSB15, Closed Side Base. 15" deep x 6" high.
♦ KCSB18, Closed Side Base. 18" deep x 6" high.
♦ KCSB21, Closed Side Base. 21" deep x 6" high.
♦ KCSB24, Closed Side Base. 24" deep x 6" high.

Selecting the Right Model:

♦ Base type: choose Closed Front Base for the front of the locker row or Closed Side Base for exposed ends.
♦ For width or depth, match the width for front bases or the depth for side bases to your locker size, from 12" to 24".
♦ Installation: front bases snap into place without fasteners, while side bases bolt to front and rear legs.

Where Commonly Used:

♦ Locker Row Installations: closed bases enclose the base of a locker row for a finished appearance.
♦ Exposed Locker Ends, side bases provide a matching finish at row ends visible to the room.
♦ Multi-Depth Locker Setups: side base options match a range of locker depths.
♦ Facility Standardization: matching finish keeps the base consistent with the lockers above.

CustomMHS carries the full line of Hallowell locker accessories, backed by the manufacturer's warranty.