Logitrans SELFSR 1003-63 Straddle Legs Rotator 2,200 lb Powered Lift and Drive

The Logitrans Straddle Legs Rotator Non-Adjustable Box Holder SELFSR 1003-63 is built for ergonomic handling of crates and boxes when different box widths are not required. With powered drive and powered lift, this unit combines transport, height adjustment, and rotation in one efficient solution. It can tilt boxes so operators can access contents without stretching, bending, or straining their backs. This model features a straddle-leg design and is supplied with forks and without clamps; optional box holders are available. Fork options include 22-inch or 27-inch overall widths, 49-inch fork lengths, a 63-inch lifting height, and a 2,200-pound capacity.

Specifications
♦  Fork Size:  22" or 27" wide x 49" long
♦  Lifting Height: 63"
♦  Capacity:  2,200 pounds
♦  Powered Lift, Powered Drive
♦  Straddle Legs Design
♦  With Forks, without clamps

For fork size 22” OD, the non-adjustable box sizes are 31.5”, 33.5”, 37.8”, or 39.4”
For fork size 27” OD, the non-adjustable box sizes are 39.4”, 41.3”, 45.7”, or 47.2”
NOTE: Picture shown with optional clamps.

OPTIONAL EXTRAS
Depending on the height and weight of the box and the working situation, one or two sets of box holders can be chosen:
♦  Box holders with clamps can hold boxes of heights between 15.4" and 37.5" when tilted (also 180°). 
♦  Box holders without clamps support the box (box holders with clamps are recommended when tilting more than 60°).
♦  Box holders are available for:
    ♦  Box widths of 31.5", 33.5", or 39.5" by a fork span of 22".
    ♦  Box widths of 39,5", 41,35", or 48" by a fork span of 27".
    ♦  Special arrangements for a maximum box width of 55" are possible.

Why Use This Product

Manual picking from boxes and crates often forces awkward posture, especially when the product sits below waist level. The SELFSR 1003-63 solves that by bringing the load to the operator and tilting it for easy reach. This reduces back strain, improves comfort, and supports safer handling over long shifts. Safety is built into the tilt function, which is automatically deactivated if the rotation center is more than 46.5 inches or less than 27 inches above the floor. The unit is also designed for durability with low maintenance costs due to fewer wearing parts and no relays.

How It Helps Your Operation
This rotator improves throughput and consistency by combining lifting, transporting, and rotation in one unit, reducing time spent repositioning loads and changing equipment. Operators can easily set the degree of tilt and rotation speed, with precise acceleration and deceleration at start and stop for controlled handling. The tilting function automatically deactivates when returning to the neutral position, supporting safe repeatable workflows. A digital controller with a large touchscreen display allows programming of stops, turning angle, speed, and rotation, while log functions track operational time, battery status, current consumption, number of operations, and overload events. Error messages and live position feedback help troubleshoot quickly, and a supervisor lock can restrict settings.

Watch Product Video