Logitrans SELFSR 1003 Non-Adjustable Box Holder Rotator with Powered Drive and Straddle Legs

The Logitrans SELFSR 1003 is the fully powered, universal-pallet-access rotator in the non-adjustable box holder family, combining powered drive, powered lift, and straddle-leg construction with fixed, non-adjustable box holders designed for standardized single-box-size operations. The straddle legs accommodate all pallet types, including solid-deck, closed-bottom, and open-entry pallets. Powered drive eliminates manual pushing effort. The fixed holders eliminate the width adjustment step between cycles.

The rotating attachment tilts boxes and crates beyond 90 degrees, with a 2,200 lb capacity, for ergonomic access to contents without bending or back strain. Fork size is 22" or 27" wide x 49" long (specify at order). 

Five models are available at lift heights of 36", 47", 55", 63", and 75". All specifications are otherwise identical.

Models and Specifications:

♦ SELFSR 1003-36, 22" or 27" W x 49" L forks (specify at order). Straddle leg design. Maximum lift height 36". Capacity 2,200 lbs. Powered lift and powered drive. Fixed non-adjustable box holders. Tilts beyond 90°. Contact CustomMHS to confirm box holder width before ordering.

♦ SELFSR 1003-47, 22" or 27" W x 49" L forks. Straddle leg design. Maximum lift height 47". Capacity 2,200 lbs. Same specification as SELFSR 1003-36 at a greater lift height.

♦ SELFSR 1003-55, 22" or 27" W x 49" L forks. Straddle leg design. Maximum lift height 55". Capacity 2,200 lbs. Same specification at greater lift height.

♦ SELFSR 1003-63, 22" or 27" W x 49" L forks. Straddle leg design. Maximum lift height 63". Capacity 2,200 lbs. Same specification at greater lift height.

♦ SELFSR 1003-75, 22" or 27" W x 49" L forks. Straddle leg design. Maximum lift height 75". Capacity 2,200 lbs. Same specification at the greatest lift height in the lineup.

Selecting the Right Model:

♦ Lifting height, 36" to 75", select based on the working height required for comfortable content access after tilting. All five models are otherwise identical.

♦ SELFSR 1003 (powered drive, straddle) vs. ELFSR 1001 (manual push, straddle), both use straddle legs and fixed non-adjustable holders at the same heights, forks, and capacity. The SELFSR 1003 adds a powered drive; the ELFSR 1001 requires manual pushing and is lower-priced. Choose the SELFSR 1003 when transport distance, cycle frequency, or operator fatigue requires a powered drive.

♦ SELFSR 1003 (non-adjustable) vs. SELFSRA 1003 (adjustable straddle, path for SELFSRA), both use powered drive and straddle legs. The SELFSRA 1003 accommodates box widths from 31.5" to 48" via tool-free adjustment. The SELFSR 1003 uses fixed holders and is lower-priced. Choose the SELFSR 1003 when box dimensions are standardized throughout the operation.

♦ SELFSR 1003 (straddle) vs. SELFR 1003 (fork-over, path 4030), both use powered drive and fixed non-adjustable holders. The SELFR 1003 uses fork-over construction limited to open-entry pallets and is lower-priced. The SELFSR 1003 uses straddle legs for universal pallet access. Choose the SELFSR 1003 when solid-deck, closed-bottom, or mixed pallet types are present.

Where Commonly Used:

♦ High-Frequency Standardized Box Handling on All Pallet Types with Powered Transport, the highest-demand use case for the SELFSR 1003: operations processing high daily volumes of a single consistent box size on a mix of pallet types, where powered drive sustains throughput and straddle legs handle every pallet base configuration encountered without sorting or equipment changes.

♦ Production Line Component Supply on Solid-Deck or Custom-Base Pallets at High Cycle Rates, production environments supplying standardized component containers on solid-base skids or proprietary pallet types use the SELFSR 1003 for powered transport and ergonomic tilt at sustained rates where manual-push alternatives would impose operator fatigue over a full shift.

♦ Distribution Center Deconsolidation of Uniform Cartons on Mixed Inbound Pallets, distribution centers processing inbound freight of a single standardized carton size on varying supplier pallets use the SELFSR 1003 for consistent powered rotator access regardless of pallet base type, without the adjustability premium of the SELFSRA 1003.

♦ Receiving Operations with Standardized Container Dimensions and Unknown Pallet Types, receiving and deconsolidation operations where the box is always the same size but the pallet type varies by supplier use the SELFSR 1003 as the appropriate powered universal-pallet rotator fixed holders for the known container, straddle legs for the unknown pallet base.

CustomMHS is an authorized Logitrans distributor. All purchases include the manufacturer's factory warranty.