Logitrans Panther Manual Pallet Truck

Logitrans Panther Manual Pallet Truck – Ergonomic & Durable Material Handling 

The Logitrans Panther is a heavy-duty manual pallet truck built for demanding daily use in warehouses, distribution centers, manufacturing facilities, and loading docks. Specially engineered wheels require minimal starting effort, making it easier to get heavy loads moving from a standstill, a critical advantage when operators move pallets dozens of times per shift.

Responsive steering and a compact turning radius provide good maneuverability in narrow aisles and tight staging areas. The ergonomic handle reduces hand and wrist fatigue during repeated use. Steel construction throughout is built for the daily demands of industrial environments.

Eight fork length options cover standard through extended configurations. Two fork-width options (20.5" and 27") are available for each length. One heavy-duty 6,600 lb model is available for applications exceeding standard capacity. Prices are listed by manufacturer model number for easy comparison with competitors.

Choosing the Right Model -- Important Capacity Note:

Six of the eight models carry 5,500 lbs. The 94" long fork model carries 3,300 lbs due to the extended lever arm, and the heavy-duty Panther 3072/3082 carries 6,600 lbs at 48" fork length. Verify your load weight and fork length requirements before selecting.

♦ Panther 2572/2582-24 -- 24" fork length, 5,500 lb capacity -- Short fork for compact pallets, half pallets, or tight entry clearances.
♦ Panther 2572/2582-32/36/42 -- 32", 36", or 42" fork length, 5,500 lb capacity -- Mid-length forks covering the most common standard pallet depths. Three length options available within this model grouping.
♦ Panther 2572/2582-48 -- 48" fork length, 5,500 lb capacity -- Standard length for most 48" deep pallets. The most commonly specified fork length for general warehouse use.
♦ Panther 2572/2582-60 -- 60" fork length, 5,500 lb capacity -- Extended length for deeper pallets, double-stacked loads, or applications requiring more fork engagement.
♦ Panther 2572/2582-72 -- 72" fork length, 5,500 lb capacity -- Long fork for oversized pallets, skids, or loads requiring full-length support.
♦ Panther 2572/2582-79 -- 79" fork length, 5,500 lb capacity -- Extended long fork for large platform loads or specialty pallet configurations.
♦ Panther 2572/2582-94 -- 94" fork length, 3,300 lb capacity -- Maximum length in the standard Panther series. Note: capacity is reduced to 3,300 lbs at this fork length. Not suitable for loads approaching the 5,500-lb rating of the shorter models.
♦ Panther 3072/3082 -- 48" fork length, 6,600 lb capacity -- Heavy-duty model for applications exceeding standard 5,500 lb capacity. Same fork length as the 2572/2582-48 but with reinforced construction for heavier loads.

Not sure which model fits your pallets and load weights? Call 866-333-0728 or use the quote form.

Panther vs. Panther Silent -- Which Is Right for Your Facility?

The Panther Manual and Panther Silent share the same ergonomic design and build quality. The difference is wheel material and noise output.

♦ Panther Manual (this page) -- Standard wheels suited for industrial floors and warehouse environments where noise level is not a concern.
♦ Panther Silent -- Polyurethane wheels that significantly reduce operating noise. The correct choice for hospitals, retail environments, food production, or any facility where quiet operation matters.

If your facility has noise-sensitive areas or operates in proximity to office space, retail, or food production, the Silent model is worth the additional cost. For standard industrial warehouse use, the manual Panther is the appropriate selection.