Logitrans SELFSRA 1003 Fully Powered Rotator with Adjustable Box Holder and Straddle Legs

Logitrans SELFSRA 1003 Rotator – Adjustable Box Holder with Straddle Legs 

The Logitrans SELFSRA 1003 is the most capable rotator in the Logitrans adjustable box holder range. It combines fully powered operation (electric lift and electric drive) with a straddle leg design, giving operators maximum pallet compatibility and zero manual pushing effort in a single unit.

The adjustable box holders accommodate box widths from 31.5" to 48" and are set up quickly with a single handle, no tools required. The unit tilts loads beyond 90 degrees while maintaining a 2,200-lb rated capacity, keeping contents within comfortable reach throughout filling, emptying, sorting, and inspection cycles. The straddle legs extend on either side of the pallet base, allowing the SELFSRA 1003 to handle all pallet types, including closed-bottom pallets that fork-over rotators cannot engage.

Two fork width options are available (22" and 27"). Five models cover lift heights from 36" to 75", all sharing the same fork length and 2,200 lb capacity. The only difference between models is the maximum lift height. Prices are listed by manufacturer model number for easy comparison with competitors.

Straddle Leg Design -- Pallet Compatibility:

The SELFSRA 1003 uses a straddle leg design, meaning the outrigger legs straddle the outside of the pallet base. This allows it to handle all pallet types, including closed-bottom pallets, block pallets, and standard four-way entry pallets. The pallet compatibility image on this page shows supported configurations.

How the SELFSRA 1003 Fits in the Rotator Range:

All four adjustable box holder rotators share the same box holder width range (31.5" to 48"), fork dimensions (22" or 27" wide x 49" long), lift height range (36" to 75"), and 2,200 lb capacity. They differ by drive type and leg design.

♦ ELFRA 1001 -- Powered lift, manual push, fork-over. Works with standard, open-bottom, and skid pallets. Lowest price. Best for short travel distances and lower frequency use.
♦ ELFSRA 1001 -- Powered lift, manual push, straddle legs. Works with all pallet types, including closed-bottom. Mid-price. Best when pallet versatility matters but a powered drive is not needed.
♦ SELFRA 1003 -- Powered lift, powered drive, fork-over. Works with standard, open-bottom, and skid pallets. Higher price. Best for longer travel distances or high-frequency use without the need for closed-bottom pallets.
♦ SELFSRA 1003 -- Powered lift, powered drive, straddle legs. Works with all pallet types, including closed-bottom. Highest price. Best when both powered travel and maximum pallet compatibility are required.

If your operation handles mixed or closed-bottom pallets and your operators frequently move the rotator across the floor throughout the shift, the SELFSRA 1002 is the correct selection.

Choosing the Right Lift Height:

All five SELFSRA 1003 models carry 2,200 lbs to their full rated height. Select based on the working height that best fits your operators and workstations.

♦ SELFSRA 1003-36 -- 36" maximum lift height. Floor to standard work surface.
♦ SELFSRA 1003-47 -- 47" maximum lift height. Mid-height access for elevated workbenches or conveyor infeed.
♦ SELFSRA 1003-55 -- 55" maximum lift height. Upper mid-height for taller workstations or elevated staging.
♦ SELFSRA 1003-63 -- 63" maximum lift height. Tall workstations or rotation access above standard height.
♦ SELFSRA 1003-75 -- 75" maximum lift height. Maximum reach. Best for overhead conveyors or elevated discharge points.

Not sure which height fits your workstation setup? Call 866-333-0728 or use the quote form.