Logitrans ELFR 1001-36 Rotator with Non-Adjustable Box Holder

The Logitrans Rotator with Non-Adjustable Box Holder, model ELFR 1001-36, is built for efficient handling of crates and boxes when different box widths are not required. This unit features powered lift and manual push operation, allowing operators to raise, transport, and rotate loads with better control and less physical strain. With a 2,200-pound capacity, 36-inch lifting height, 22-inch- or 27-inch-wide by 49-inch-long fork sizes, and a fork-over design, it is well-suited for warehouses, packaging stations, production environments, and shipping areas. The unit comes with forks and without clamps, while box holders are optional. Picture shown with optional clamps.

♦  Fork Size:  22" or 27" wide x 49" long
♦  Lifting Height: 36"
♦  Capacity:  2,200 pounds
♦  Powered Lift, Manual Push
♦  With Forks, without clamps
♦  Fork over Design

For fork size 22” OD, the non-adjustable box sizes are 31.5”, 33.5”, 37.8”, or 39.4”
For fork size 27” OD, the non-adjustable box sizes are 39.4”, 41.3”, 45.7”, or 47.2”

DURABILITY
♦  Low maintenance costs - no relays and wearing parts
SAFETY
♦  Tilting function is deactivated when the rotation center is more than 46.5" or less than 27" above the floor.
EFFICIENCY AND FLEXIBILITY
♦  Height adjustment, rotation, and transportation in the same unit
♦  Easy to set the degree of tilt and rotation speed
♦  Precise and controlled acceleration/deceleration on rotation at start/stop
♦  Tilting function is deactivated automatically when rotating to the neutral position
♦  Remote control for rotation/lifting/lowering (with cable as standard/wireless as an optional extra)
DIGITAL CONTROLLER
♦  Large display – easy to use, easy visual presentation, touchscreen
♦  Possible to program, e.g., several stops, turning angle, speed, rotation
♦  Log function, e.g., operational time, current consumption, number of operations, overload registration, battery status
♦  Shows error messages and actual position/turning angle
OPTIONAL EXTRAS
Depending on the height and weight of the box and the working situation, one or two sets of box holders can be chosen:
♦  Box holders with clamps can hold boxes of heights between 15" and 34.25" when tilted (also 180°). 
♦  Box holders without clamps support the box (box holders with clamps are recommended when tilting more than 60°)
♦  Box holders are available for:
   ♦  Box widths of 31.5", 33.5", or 39.5" by a fork span of 22".
   ♦  Box widths of 39,5", 41,35", or 48" by a fork span of 27".
   ♦  Special arrangements for a maximum box width of 55" are possible.
DURABILITY
♦  Low maintenance costs - no relays and wearing parts
SAFETY
♦  Tilting function is deactivated when the rotation center is more than 46,5" or less than 27" above the floor.
EFFICIENCY AND FLEXIBILITY
♦  Height adjustment, rotation, and transportation in the same unit
♦  Easy to set degree of tilt and rotation speed
♦  Precise and controlled acceleration/deceleration on rotation at start/stop
♦  Tilting function is deactivated automatically when rotating to the neutral position
♦  Remote control for rotation/lifting/lowering (with cable as standard/wireless as an optional extra)
DIGITAL CONTROLLER
♦  Large display – easy to use, easy visual presentation, touchscreen
♦  Possible to program, e.g., several stops, turning angle, speed, rotation
♦  Log function, e.g., operational time, current consumption, number of operations, overload registration, battery status
♦  Shows error messages and actual position/turning angle
♦  The supervisor function can be activated to lock the settings
OPTIONAL EXTRAS
Depending on the height and weight of the box and the working situation, one or two sets of box holders can be chosen:
♦  Box holders with clamps can hold boxes of heights between 15.4" and 37.5" when tilted (also 180°). 
♦  Box holders without clamps support the box (box holders with clamps are recommended when tilting more than 60°).
♦  Box holders are available for:
    ♦  Box widths of 31.5", 33.5", or 39.5" by a fork span of 22".
    ♦  Box widths of 39,5", 41,35", or 48" by a fork span of 27".
    ♦  Special arrangements for a maximum box width of 55" are possible.

Why Use This Product
This Logitrans rotator is a practical choice for operations seeking to improve ergonomics and reduce worker strain when accessing the contents of boxes or crates. Tilting the load toward the user helps reduce stretching, bending, and back strain during loading, unloading, or picking tasks. The non-adjustable box holder configuration is ideal for facilities that handle consistent box sizes, and optional box holders are available to match different box widths and working conditions. For heavier tilting applications, two box holders are required for loads between 1,100 and 2,200 pounds. Safety is also built into the unit, including automatic deactivation of the tilting function when the rotation center is more than 46.5 inches or less than 27 inches above the floor.

How It Helps Your Operation
In daily use, the ELFR 1001-36 streamlines material handling by combining height adjustment, rotation, and transportation in a single machine. Operators can easily set the tilt angle and rotation speed, while controlled acceleration and deceleration at start and stop improve handling precision. The large touchscreen digital controller makes operation simple and can be programmed for several stops, turning angles, speed, and rotation settings. It also provides useful performance data, including operational time, current consumption, number of operations, overload registration, battery status, error messages, and actual turning angle. With standard cable remote control for rotation, lifting, and lowering, plus optional wireless control, this rotator helps create a safer, more efficient workflow throughout the workday.

The non-adjustable box holder is particularly well-suited for handling standard-sized boxes or containers where uniform size is common. Its fixed size ensures stability and safety for these specific container dimensions. This equipment helps improve workplace ergonomics, enhance safety, and increase operational efficiency across various industries.

Watch Product Video