Logitrans ELFSR 1001-55 Fully Powered Straddle Rotator with Non-Adjustable Box Holder

The Logitrans Fully Powered Straddle Rotator with Non-Adjustable Box Holder, model ELFSR 1001-55, is designed for efficient handling of crates and boxes when different box widths are not required. This material-handling rotator features powered lift and manual push operation, providing operators with a dependable way to raise, tilt, and position loads with greater control. With a 2,200-pound capacity, 55-inch lifting height, and fork sizes of 22-inch or 27-inch wide by 49-inch long, it is well-suited for warehouses, production facilities, shipping areas, and industrial workstations. The unit comes with forks and without clamps, while box holders are available as an optional extra. Picture shown with optional clamps.

♦  Fork Size:  22" or 27" wide x 49" long
♦  Lifting Height: 55"
♦  Capacity:  2,200 pounds
♦  Powered Lift, Manual Push
♦  With Forks, without clamps
♦  Straddle Legs Design

For fork size 22” OD, the non-adjustable box sizes are 31.5”, 33.5”, 37.8”, or 39.4”
For fork size 27” OD, the non-adjustable box sizes are 39.4”, 41.3”, 45.7”, or 47.2”

DURABILITY
♦  Low maintenance costs - no relays and wearing parts
SAFETY
♦  Tilting function is deactivated when the rotation center is more than 46,5" or less than 27" above the floor.
EFFICIENCY AND FLEXIBILITY
♦  Height adjustment, rotation, and transportation in the same unit
♦  Easy to set the degree of tilt and rotation speed
♦  Precise and controlled acceleration/deceleration on rotation at start/stop
♦  Tilting function is deactivated automatically when rotating to the neutral position
♦  Remote control for rotation/lifting/lowering (with cable as standard/wireless as an optional extra)
DIGITAL CONTROLLER
♦  Large display – easy to use, easy visual presentation, touchscreen
♦  Possible to program, e.g., several stops, turning angle, speed, rotation
♦  Log function, e.g., operational time, current consumption, number of operations, overload registration, battery status
♦  Shows error messages and actual position/turning angle
♦  The supervisor function can be activated to lock the settings
OPTIONAL EXTRAS
Depending on the height and weight of the box and the working situation, one or two sets of box holders can be chosen:
♦  Box holders with clamps can hold boxes of heights between 15.4" and 37.5" when tilted (also 180°). 
♦  Box holders without clamps support the box (box holders with clamps are recommended when tilting more than 60°).
♦  Box holders are available for:
    ♦  Box widths of 31.5", 33.5", or 39.5" by a fork span of 22".
    ♦  Box widths of 39,5", 41,35", or 48" by a fork span of 27".
    ♦  Special arrangements for a maximum box width of 55" are possible.

Why Use This Product
This Logitrans rotator is an excellent choice for operations that want to improve ergonomics and reduce physical strain during box and crate handling. Allowing loads to tilt toward the operator helps users reach contents more easily without excessive stretching, bending, or back strain. The non-adjustable box holder design is ideal for facilities that handle consistent box widths, creating a more stable and repeatable workflow. Built-in safety features also support safer operation by deactivating the tilting function when the rotation center is more than 46.5 inches or less than 27 inches above the floor, and by automatically deactivating it when rotating back to the neutral position.

How It Helps Your Operation 
In daily use, the ELFSR 1001-55 streamlines material handling by combining height adjustment, rotation, and transportation in a single unit. Operators can easily set the tilt angle and rotation speed, while precise acceleration and deceleration at start and stop provide better load control. The large touchscreen digital controller offers clear visual operation and can be programmed for multiple stops, turning angles, speed, and rotation settings. It also tracks operational time, current consumption, number of operations, overload registration, battery status, and error messages, while showing the actual position and turning angle. With standard cable remote control for rotation, lifting, and lowering, this rotator supports safer workflows, improved productivity, and more efficient day-to-day handling.

The non-adjustable box holder is particularly well-suited for handling standard-sized boxes or containers where uniform size is common. Its fixed size ensures stability and safety for these specific container dimensions. This equipment helps improve workplace ergonomics, enhance safety, and increase operational efficiency across various industries.

Watch Product Video