Logitrans ELFSR 1001-63 Fully Powered Straddle Rotator with Non-Adjustable Box Holder

The Logitrans Fully Powered Straddle Rotator with Non-Adjustable Box Holder, model ELFSR 1001-63, is designed for efficient handling of crates and boxes when different box widths are not required. This material handling rotator features powered lift and manual push operation, allowing operators to raise, tilt, and position loads with greater control and less physical strain. With a 2,200-pound capacity, 63-inch lifting height, and fork sizes of 22-inch or 27-inch wide by 49-inch long, it is well-suited for warehouses, production areas, shipping departments, and industrial facilities. The unit comes with forks and without clamps, while box holders are available as an optional extra. Picture shown with optional clamps.

♦  Fork Size:  22" or 27" wide x 49" long
♦  Lifting Height: 63"
♦  Capacity:  2,200 pounds
♦  Powered Lift, Manual Push
♦  With Forks, without clamps
♦  Straddle Legs Design

For fork size 22” OD, the non-adjustable box sizes are 31.5”, 33.5”, 37.8”, or 39.4”
For fork size 27” OD, the non-adjustable box sizes are 39.4”, 41.3”, 45.7”, or 47.2”

DURABILITY
♦  Low maintenance costs - no relays and wearing parts
SAFETY
♦  Tilting function is deactivated when the rotation center is more than 46,5" or less than 27" above the floor.
EFFICIENCY AND FLEXIBILITY
♦  Height adjustment, rotation, and transportation in the same unit
♦  Easy to set the degree of tilt and rotation speed
♦  Precise and controlled acceleration/deceleration on rotation at start/stop
♦  Tilting function is deactivated automatically when rotating to the neutral position
♦  Remote control for rotation/lifting/lowering (with cable as standard/wireless as an optional extra)
DIGITAL CONTROLLER
♦  Large display – easy to use, easy visual presentation, touchscreen
♦  Possible to program, e.g., several stops, turning angle, speed, rotation
♦  Log function, e.g., operational time, current consumption, number of operations, overload registration, battery status
♦  Shows error messages and actual position/turning angle
♦  The supervisor function can be activated to lock the settings
OPTIONAL EXTRAS
Depending on the height and weight of the box and the working situation, one or two sets of box holders can be chosen:
♦  Box holders with clamps can hold boxes of heights between 15.4" and 37.5" when tilted (also 180°). 
♦  Box holders without clamps support the box (box holders with clamps are recommended when tilting more than 60°).
♦  Box holders are available for:
    ♦  Box widths of 31.5", 33.5", or 39.5" by a fork span of 22".
    ♦  Box widths of 39,5", 41,35", or 48" by a fork span of 27".
    ♦  Special arrangements for a maximum box width of 55" are possible.

Why Use This Product
This Logitrans rotator is a strong choice for operations that want to improve ergonomics, safety, and handling efficiency when working with crates and boxes. Tilting the load toward the operator helps reduce stretching, bending, and back strain during picking, filling, or unloading tasks. The non-adjustable box holder design works especially well for facilities that handle consistent box widths and want a stable, repeatable process. Safety features are built into the unit, including automatic deactivation of the tilting function when the rotation center is more than 46.5 inches or less than 27 inches above the floor, as well as automatic deactivation when rotating back to the neutral position.

How It Helps Your Operation
In day-to-day use, the ELFSR 1001-63 simplifies material handling by combining lifting, rotation, and transportation into a single unit. Operators can easily set the tilt angle and rotation speed, while precise acceleration and deceleration at start and stop allow for smoother, more controlled handling. The large touchscreen digital controller is easy to use and can be programmed for several stops, turning angles, speed, and rotation settings. It also provides valuable operating data, including battery status, operating time, current consumption, overload detection, number of operations, error messages, and actual turning angle. With standard cable remote control for rotation, lifting, and lowering, this rotator helps support safer workflows, better productivity, and more consistent daily performance.

The non-adjustable box holder is particularly well-suited for handling standard-sized boxes or containers where uniform size is common. Its fixed size ensures stability and safety for these specific container dimensions. This equipment helps improve workplace ergonomics, enhance safety, and increase operational efficiency across various industries.

Watch Product Video