Logitrans ELFSR 1001-75 Straddle Rotator 2,200 lb 75 Inch Lift Non-Adjustable Box Holder

The Fully Powered Straddle Rotator Non-Adjustable Box Holder ELFSR 1001-75 is designed for ergonomic handling of crates and boxes when different box widths are not required. This material-handling rotator tilts loads so operators can reach the contents without stretching, bending, or straining their backs. It combines height adjustment, rotation, and transportation into a single unit, streamlining picking, replenishment, and staging tasks. The ELFSR 1001-75 offers a powered lift with manual push, a 2,200-pound capacity, and a 75-inch lifting height. It features a straddle-legs design and includes forks without clamps, with optional box holders available. Fork choices include 22-inch or 27-inch overall width with 49-inch fork length.

Specifications
♦  Fork Size:  22" or 27" wide x 49" long
♦  Lifting Height: 75"
♦  Capacity:  2,200 pounds
♦  Powered Lift, Manual Push
♦  With Forks, without clamps
♦  Straddle Legs Design
NOTE: Picture shown with optional clamps.

For fork size 22” OD, the non-adjustable box sizes are 31.5”, 33.5”, 37.8”, or 39.4”
For fork size 27” OD, the non-adjustable box sizes are 39.4”, 41.3”, 45.7”, or 47.2”

OPTIONAL EXTRAS
Depending on the height and weight of the box and the working situation, one or two sets of box holders can be chosen:
♦  Box holders with clamps can hold boxes of heights between 15.4" and 37.5" when tilted (also 180°). 
♦  Box holders without clamps support the box (box holders with clamps are recommended when tilting more than 60°).
♦  Box holders are available for:
    ♦  Box widths of 31.5", 33.5", or 39.5" by a fork span of 22".
    ♦  Box widths of 39,5", 41,35", or 48" by a fork span of 27".
    ♦  Special arrangements for a maximum box width of 55" are possible.

Why Use This Product

Operations that pick from boxes and crates often lose time and increase injury risk when workers must lean into containers or reach down repeatedly. The ELFSR 1001-75 improves ergonomics by bringing the product to a workable height and tilting it for better access. Safety controls are built into the tilting system, which is deactivated when the rotation center is more than 46.5 inches or less than 27 inches above the floor. Low maintenance design reduces service needs because there are no relays and fewer wearing parts, making it a smart fit for facilities that want dependable performance with less upkeep.

How It Helps Your Operation
This straddle rotator increases efficiency by combining lift, rotation, and transport so operators can complete more tasks without changing equipment or repositioning loads manually. Users can easily set the degree of tilt and rotation speed, with precise acceleration and deceleration at start and stop for controlled handling. The unit automatically deactivates tilting when returning to the neutral position, supporting repeatable workflows. A digital touchscreen controller allows programming of multiple stops, turning angle, speed, and rotation while providing operational logs such as run time, number of operations, overload registration, battery status, and current consumption. It also displays error messages and live position or turning angle, and a supervisor lock can restrict settings.

Watch Product Video