Wesco 273511 Fixed Base Hand Winch Stacker – 500 lb Capacity

Wesco Fixed Base Hand Winch Stacker – 500 lb Capacity, 71" Max Lift, Narrow-Base Manual Stacker | 273511

The Wesco Fixed Base Hand Winch Stacker (273511) is a compact, maneuverable manual stacker designed for narrow workspaces, tight aisles, and confined production or maintenance areas. Built from a durable blend of aluminum and steel, this stacker delivers a 500 lb lifting capacity in a lightweight, easy-to-handle frame.

With a maximum lift range of 48.5" to 71", this model is ideal for workstation loading, shelf and rack positioning, equipment installation, and material-handling tasks that don’t require extreme lift heights. The lowered height range of 3.5" to 27.5" allows the forks to pick up low-clearance items, skids, and small pallets commonly used in assembly and packaging environments.

The fixed base legs, measuring 13" inside width and 21.5" overall width, give this stacker a narrow, compact footprint that fits comfortably in tight aisles where straddle-leg stackers won’t function. The 4" x 22.5" x 1.75" fork can be inverted to provide two different working height configurations, adding versatility for irregular or off-floor loads.

Mobility is handled by 8" non-marking rear wheels and 2" non-marking front swivel casters, making the unit easy to maneuver without leaving marks on finished floors. A winch crank handle provides smooth manual lifting and locks to secure the carriage at height. Top-of-frame rollers allow the stacker to be laid horizontally for transport, making it simple to load into service vans or store when not in use.

If you need a manual stacker that reaches 71", handles 500 lb loads, and fits where larger stackers can’t, the 273511 is a practical, durable, and cost-effective solution.

Specifications
♦  Overall dimensions: 24" wide x 68" high x 35" long. 
♦  Maximum Lift Range: 48.5" to 71".
♦  Lowered Height Range: 3.5" to 27.5".
♦  Fork size: 4" wide x 22.5" long x 1.75" high
♦  Base legs: 13" inside width x 21.5" overall width.
♦  11.25" load centers.
♦  500 pounds capacity.
♦  Winch crank handle locks to secure carriage.
♦  Top of frame rollers facilitate laying the truck horizontally for transport.
♦  Fixed Base used in narrow workspaces.
♦  8" rear wheels and 2" front swivel casters are non-marking.
♦  Forks can be inverted for two different lift heights.
♦  Part number 273511 and model number HWLFX-5.

Option:
♦ A removable 20.5" wide x 24.25" long steel platform that fits over forks is available.