Biofit FL-Series Sewn Seams Static Control Chairs

Biofit FL-Series Sewn Seams Static Control Chairs highlighted by a larger seat and upholstery with sewn seams to minimize cushion foam compression, enhancing comfort, performance, and looks. To assure continuity in its chairs, BioFit goes beyond the basics. Every part of a BioFit static control chair is grounded to the base. Additionally, every chair has a drag chain and conductive glides or casters. The reason? Dirt is an insulator and can disrupt continuity. BioFit provides a different path to ground in case of dirt build-up in any single way. A spring-loaded contact ball bearing assembly in the pneumatic seat-height adjustment mechanism is unique to BioFit. This ball bearing rides against the inner cylinder of the pneumatic mechanism, thereby assuring continuity from the top of the backrest and seat through the pneumatic cylinder to the base. The backrest is 15.5” wide x 14.5” high with lumbar support and a plastic protective panel. Seat: Ergonomic saddle-shaped, contoured 21” wide x 19” deep x 3” thick seat with sewn seams, waterfall front, and internal seat board bumper guard. Upholstery:  Conductive or Static Control Vinyl or Cloth. The chair has conductive glides or casters. Controls: Standard with Task Control Soft Touch pneumatic seat-height adjustment, fixed rearward seat tilt of 3-1/2°, backrest tilt, backrest-height adjustment. Metal parts: Chrome Plated. Capacity: 350-pound capacity. 

 

Select Your Base
biofit ees ergonomic chair biofit eea chair biofit eew ergonomic chair
S-Base
23” diameter tubular steel base
21” diameter affixed footring
A-Base
25.6” diameter cast 
aluminum base
W-Base
28.7” diameter 
wide aluminum base

 

Here's how to calculate your seat height to perform at your best.
BioFit manufactures models in a wide selection of seat-height adjustment ranges. This choice of adjustability options helps ensure our chairs and stools fit the size and body type of individual workers and unique applications, delivering in-demand flexibility to accommodate users on different shifts or the same worker performing other tasks at different work levels.

The basic formula to calculate the ideal seat height directly corresponds to the actual work level ‒ that is, the distance from the floor to the work surface height ‒ minus 12 inches. Therefore, BioFit recommends using this figure as the mid-point of the seat-height-adjustment range of the chair purchased.

For example, a 40-inch work level ‒ the height measured from the floor to the top of the work surface ‒ minus 12 inches = 28 inches ‒ is the mid-point of the chair or stool seat height adjustment range.

This formula applies to most workers. BioFit ergonomic seating will fit 90% of workers without customization, while alterations can be made easily for the other 10%.

Click on Model Number for More Information

Model Number Seat Height Seat Adjustment Base Style Price 1-3 Buy Now
Low
18" to 22"
S-Base
$768.88
Low
17" to 22"
A-Base
$744.26
Low
17" to 22"
W-Base
$765.67
Medium
21" to 28"
S-Base
$774.24
Medium
19" to 26"
A-Base
$754.97
Medium
19" to 26"
W-Base
$792.45
High
25" to 32"
S-Base
$808.51
High
22" to 32"
A-Base
$760.32
High
22" to 32"
W-Base
$803.15