Industrial Storage Racking
Warehouse racking systems are designed to maximize space, improve inventory access, and support efficient material flow. Each system is configured based on product size, weight, turnover, and the type of forklift or handling equipment used. This tailored approach ensures safer storage and consistent productivity in warehouses, distribution centers, and manufacturing facilities.
Racking systems allow operations to store more product vertically, reduce floor congestion, and improve picking accuracy. Selecting the right rack type for your product mix and workflow improves safety, accelerates access, and optimizes labor and space.
Selecting the Right Type:
♦ Product type: choose Cantilever Racking for long materials like lumber and pipe, Pallet Racking for palletized goods, or Bulk Rack for boxed inventory.
♦ Capacity: MECO Structural Racking offers the highest per-bay capacity (up to 54,200 lb) for the heaviest structural storage needs.
♦ Specialty storage: choose Reel Racks, Bar Storage Racks, or Coil Cradles for specific material shapes not suited to standard pallet or cantilever racking.
Where Commonly Used:
♦ Lumber Yards and Metal Distributors, cantilever racking supports long, uniform materials.
♦ Warehouses and Distribution Centers: pallet racking maximizes vertical storage for palletized goods.
♦ Manufacturing Facilities, bulk and flow rack systems support carton and boxed inventory flow.
♦ Wire and Cable Operations, reel racks and reel winders support safe, efficient material handling.
CustomMHS carries the full line of MECO, Husky, Hallowell, and Keneco racking systems, backed by each manufacturer's warranty.
| MECO Pre-Configured Cantilever Racking - Single & Double Sided |
|
MECO Series 1000 Cantilever Rack, Single & Double Sided Uprights, Starter and Add-On Units
Pre-configured starter and add-on units simplify ordering for medium-duty cantilever storage.
|
MECO Series 4000 Cantilever Rack, Single & Double Sided Uprights, Starter and Add-On Units
Pre-configured starter and add-on units simplify ordering for heavy-duty cantilever storage.
|
|
Build Your Own MECO Cantilever Rack System
Step 1: Choose Your Uprights
Select the configuration that fits your space and access needs.
◆ Single-sided uprights, for wall-mounted racks or storage accessed from one side only
◆ Double-sided uprights, for back-to-back configurations that maximize storage in open floor space
Step 2: Choose Your Brace Set
Pick the brace set sized to match your upright height and depth.
Braces connect adjacent uprights and provide the structural stability that keeps the rack system square and rigid under load.
Step 3: Choose Your Arms
Select the arm style suited to what you're storing.
◆ Straight arms, for general storage of uniform materials like lumber, sheet goods, and bar stock
◆ Inclined arms, for round stock like pipe, tubing, and coil, which can otherwise roll off a level arm
|
| MECO Medium-Duty Series 1000 Cantilever Rack System Components |
MECO Medium-Duty Series 1000 Cantilever Rack System
Medium-duty uprights are accessed from one side only.
|
Double-Sided Cantilever Uprights, Compatible with Series 1000
Medium-duty uprights support back-to-back configurations in open floor space.
|
Upright Brace Sets, Compatible with Series 1000
Braces connect adjacent uprights to keep the rack system square and rigid under load.
|
Straight Arms, Compatible with Series 1000
Straight arms suit general storage of uniform materials, such as lumber and bar stock.
|
Inclined Arms, Compatible with Series 1000
Inclined arms prevent round stock, such as pipe and coil, from rolling off the rack.
|
|
| MECO Heavy-Duty Series 2000 Cantilever Rack Systems Components |
Single-Sided Cantilever Uprights, Compatible with Series 2000
Medium heavy-duty uprights are accessed from one side only.
|
Double-Sided Cantilever Uprights, Compatible with Series 2000
Medium heavy-duty uprights support back-to-back configurations in open floor space.
|
Upright Brace Sets, Compatible with Series 2000
Braces connect adjacent uprights to keep the rack system square and rigid under load.
|
Straight Arms, Compatible with Series 2000
Straight arms suit general storage of uniform materials, such as lumber and bar stock.
|
Inclined Arms, Compatible with Series 2000
Inclined arms prevent round stock like pipe and coil from rolling off the rack.
|
|
| MECO Heavy-Duty Series 4000 Cantilever Rack System Components |
Single-Sided Cantilever Uprights, Compatible with Series 4000
Heavy-duty uprights are accessed from one side only.
|
Double-Sided Cantilever Uprights, Compatible with Series 4000
Heavy-duty uprights support back-to-back configurations in open floor space.
|
Upright Brace Sets, Compatible with Series 4000
Braces connect adjacent uprights to keep the rack system square and rigid under load.
|
Straight Arms, Compatible with Series 4000
Straight arms are well-suited for general storage of uniform materials, such as lumber and bar stock.
|
Inclined Arms, Compatible with Series 4000
Inclined arms prevent round stock, such as pipe and coil, from rolling off the rack.
|
|
| Husky Pre-Configured Pallet Racking |
Husky Pallet Racking, 36" Deep, Pre-Configured Units
Pre-configured units simplify ordering for standard-depth palletized storage.
|
Husky Pallet Racking, 42" Deep, Pre-Configured Units
Pre-configured units accommodate mid-depth palletized loads.
|
Pallet Racking, 48" Deep, Pre-Configured Units
Pre-configured units support deeper palletized storage requirements.
|
| Components and Accessories (Husky) |
|
   
Uprights, beams, decking, and safety accessories to build, expand, and protect Husky pallet rack systems.
|
| MECO Heavy-Duty Structural Pallet Racking: Uprights, Beams, and Accessories |
MECO 3-inch Structural Channel Pallet Rack Uprights, 34,800 lb per Bay
Structural channel uprights rated to 34,800 pounds per bay for heavy palletized loads.
|
MECO 4-inch Structural Channel Pallet Rack Uprights, 54,200 lb per Bay
The highest per-bay capacity in the line is 54,200 pounds for the heaviest structural storage.
|
MECO Structural Load Beams, Up to 26,000 lb per Pair
Structural beams rated up to 26,000 pounds per pair for heavy-duty pallet support.
|
|
MECO Drop-in Cross Support Bars, 5,000 lbs Capacity
Cross support bars add mid-level load support rated to 5,000 pounds.
|
MECO Coil Cradles, Coil Diameter Up to 48 Inches
Cradles safely store coiled material up to 48 inches in diameter.
|
MECO Structural Upright Protector, 3" and 4" Structural Channel Uprights
Guards protect structural uprights from forklift impact and collision damage.
|
|
MECO Drum Pallet Tracking
Specialized racking supports organized storage and tracking of drum pallets.
|
|
| Die Rack, Bulk Rack, Flow Rack |
Pull Out Heavy Duty Die Rack
Pull-out design provides easy access to heavy dies without overhead lifting.
|
Keneco Carton Flow Rack System
Gravity-flow design feeds cartons forward for efficient first-in, first-out picking.
|
Hallowell Bulk Rack, Steel Shelf Decking
Steel shelf decking supports up to 3,800 pounds per shelf for boxed inventory.
|
Mini-Racking, CNC Tool Storage
Compact racking keeps CNC tooling organized near machine work areas.
|
Hallowell High Capacity Boltless Rack
Boltless design allows fast assembly and reconfiguration for bulk storage.
|
Hallowell Reinforced Bolted Rack
Bolted construction adds extra structural rigidity for heavier bulk loads.
|
MECO Heavy Duty Reel Rack
Reel rack supports safe, organized storage of wire and cable reels.
|
MECO Horizontal Bar Storage Racks
Horizontal orientation supports long bar stock without excessive vertical space.
|
MECO Vertical Bar Storage Racks
Vertical orientation saves floor space while organizing long bar stock.
|
MECO Vertical Storage Rack
Vertical configuration maximizes storage density in a compact footprint.
|
MECO Portable Stacking U-Racks
Stackable U-racks offer mobile, space-saving storage for coiled or bar material.
|
MECO Modular Stackable Racks
Modular design allows flexible configuration and stacking as storage needs grow.
|
MECO Reel Winders, Efficient and Safe Material Handling for Reels
Reel winders support safe, controlled handling of wire and cable reels.
|
Little Giant All-Welded IBC Stand
Welded construction provides a stable, secure base for IBC tote storage.
|
|
|
