Akro-Mils 40245 Length Dividers, 6 per Carton | Fits 30240 and 30250 AkroBins

Akro-Mils 40245 Length Dividers, 6 per Carton

Quick Specs
♦ Carton Quantity: 6 dividers per carton
♦ Fits: AkroBin 30240 and AkroBin 30250
♦ Dividers per Bin: 30240 accepts 1, 30250 accepts up to 3
♦ Divider Dimensions: 14"D x 6-3/8"H x 0.285" thick
♦ Type: Length divider, runs front to back to split the bin into side-by-side compartments
♦ Color: Black
♦ Material: One-piece polypropylene, resists water, rust, corrosion, weak acids, and alkalis
♦ Installation: Slots into molded grooves in the bin; no tools required

Why Use This Product
The 40245 fits two of the largest bins in the 30 Series, and how many you need depends on which bin you use. The 30240 has a single divider slot, so one divider splits it into two compartments. The 30250 is twice as wide and has three slots, so a fully divided 30250 becomes four compartments. That difference is the practical reason to read the carton quantity before ordering: six dividers fully divide six 30240s, but only two 30250s. If you are subdividing a bank of the wide bins, plan on three cartons per carton of bins. Dividers drop into the molded grooves with no tools and lift back out when the mix changes.

Key Features Explained
♦ Fits Two Large Bins: The 30240 and the 30250 both take this divider, so one stocked part number covers both positions in a mixed layout.
♦ Up to Four Compartments in a 30250: Three slots in the wide bin mean one location can hold four part numbers, which is the main reason to buy these in quantity.
♦ Tool-Free Install and Removal: Slides into the molded grooves and lifts back out, so the layout follows the part mix instead of locking it in.
♦ Same Material as the Bin: Molded polypropylene that resists water, rust, corrosion, weak acids, and alkalis, so it survives the same washdown and chemical exposure as the bin.
♦ Model-Specific Fit: Sized to the 30240 and 30250 groove spacing. Dividers are not interchangeable across bin sizes, so ordering by bin model matters.

Best-Fit Use Cases
♦ Kitting and Assembly Staging: Four related components held in one wide 30250 instead of four separate bin locations.
♦ Warehousing and Stockrooms: Subdividing large bins so high-capacity locations do not become mixed piles.
♦ Machine Shops and Fabrication: Separating adjacent sizes of heavy stock and fittings inside one bin.
♦ Kanban Systems: Pick and replenishment lanes inside a single large location.

Ready to Order
The Akro-Mils 40245 ships 6 dividers per carton and usually ships within 2 to 3 business days. Add it to your cart to order now.

CustomMHS is an authorized distributor for all brands on this page. All purchases include the manufacturer's factory warranty.