Autoquip Series 35 Low Profile Scissor Lift Tables

A low profile scissor lift table is built to lower close to the floor so a load can be moved onto the platform without being lifted first. The Autoquip Series 35 Low Profile lowers to 5" on every model, which is the lowest collapsed height in the Series 35 family. The power unit is remote mounted and prewired, which keeps the table itself compact.
Get a Fast Quote →Read our Buying Guide →
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Platform Size | Travel | Capacity | Price | View Model |
|
24" wide x 36" long
|
5" to 29"
|
1,000 pounds
|
$14,093.44
|
||
|
24" wide x 36" long
|
5" to 29"
|
2,000 pounds
|
$14,317.90
|
||
|
24" wide x 36" long
|
5" to 29"
|
3,000 pounds
|
$14,524.64
|
||
|
24" wide x 36" long
|
5" to 29"
|
4,000 pounds
|
$14,719.57
|
||
|
24" wide x 48" long
|
5" to 41"
|
1,000 pounds
|
$15,192.09
|
||
|
24" wide x 48" long
|
5" to 41"
|
2,000 pounds
|
$15,410.65
|
||
|
24" wide x 48" long
|
5" to 41"
|
3,000 pounds
|
$15,623.29
|
||
|
24" wide x 48" long
|
5" to 41"
|
4,000 pounds
|
$15,812.30
|
||
|
24" wide x 64" long
|
5" to 53"
|
1,000 pounds
|
$16,290.75
|
||
|
24" wide x 64" long
|
5" to 53"
|
2,000 pounds
|
$16,503.40
|
||
|
24" wide x 64" long
|
5" to 53"
|
3,000 pounds
|
$16,716.04
|
||
|
24" wide x 64" long
|
5" to 53"
|
4,000 pounds
|
$16,905.05
|
The 5" lowered height is under the seven inches the CustomMHS lift table guide gives as the limit for loading with a pallet jack, so a pallet jack can roll a load onto the platform. Tables that will not lower below seven inches cannot be loaded that way. The twelve S35-LP models come in three travel ranges of 24", 36" and 48", which raise the platform to 29", 41" or 53".
The legs are one-piece steel with stiffener bars, and every pivot uses composite bearings lubricated for life. The cylinders are direct thrust with chrome-plated rods, and the hoses are double wire braided with velocity fuses to control descent if a hose fails. Autoquip designs the structure to a minimum 3:1 factor of safety and tests each unit to 110% of rated capacity. It also lists a low profile manual rotating top as an option.
Product Lines
The Series 35 Low Profile has three platform lengths and four capacities, which makes 12 models. All models have a 24" wide platform. The S35-024 series has a 24" x 36" platform, the S35-036 series has a 24" x 48" platform and the S35-048 series has a 24" x 64" platform. Each series is offered at 1,000, 2,000, 3,000 and 4,000 lb.
Selecting the Right Model
◆ S35-024-LP series (24" x 36" platform): 5" lowered and 29" raised. Models are S35-024-0010-LP (1,000 lb), S35-024-0020-LP (2,000 lb), S35-024-0030-LP (3,000 lb) and S35-024-0040-LP (4,000 lb).
◆ S35-036-LP series (24" x 48" platform): 5" lowered and 41" raised. Models are S35-036-0010-LP (1,000 lb), S35-036-0020-LP (2,000 lb), S35-036-0030-LP (3,000 lb) and S35-036-0040-LP (4,000 lb).
◆ S35-048-LP series (24" x 64" platform): 5" lowered and 53" raised. Models are S35-048-0010-LP (1,000 lb), S35-048-0020-LP (2,000 lb), S35-048-0030-LP (3,000 lb) and S35-048-0040-LP (4,000 lb).
◆ Capacity: Choose the platform length and raised height first, then the capacity that covers the heaviest load.
Will a pallet jack be loading the table?
Lowered height decides how a pallet gets onto the table, so check it before capacity.
See how lowered height controls loading in the CustomMHS lift table guide.
Where Commonly Used
Low profile tables are commonly used where loads must be rolled on from floor level, at workstations with limited clearance, and at conveyor or vehicle handoff points that sit close to the floor.
CustomMHS carries the full line of Autoquip Series 35 Low Profile scissor lift tables, backed by the manufacturer’s warranty.