Autoquip Series 35 Rover Mobile Scissor Lift Tables

A mobile scissor lift table moves to the work instead of the work moving to a fixed lift table. The Autoquip Series 35 Rover is completely self-contained and battery powered. It runs from an internal 12 VDC battery with an internal 110 VAC charger, so it needs no electrical connection, floor anchoring or air line at each workstation. One table can be shared among several workstations.
Get a Fast Quote →Read our Buying Guide →
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Platform Size | Travel | Capacity | Price | View Model |
|
24" wide x 48" long
|
14.5" lowered & 50.5" raised
|
2,500 pound
|
$13,520.49
|
||
|
24" wide x 48" long
|
14.5" lowered & 50.5" raised
|
4,000 pound
|
$13,715.42
|
||
|
24" wide x 48" long
|
14.5" lowered & 50.5" raised
|
6,000 pound
|
$14,424.23
|
||
|
24" wide x 64" long
|
15" lowered & 63" raised
|
2,500 pound
|
$16,060.39
|
||
|
24" wide x 64" long
|
15" lowered & 63" raised
|
4,000 pound
|
$16,255.31
|
||
|
24" wide x 64" long
|
15" lowered & 63" raised
|
6,000 pound
|
$16,964.12
|
Four lockable casters and a removable tow handle come standard. The operator rolls the table into place, locks the casters, and lifts. The structure uses single-piece, steel-reinforced legs, chrome-plated pins at every joint and replaceable steel rollers. Hydraulic velocity fuses stop the lift if a hose ruptures, and onboard devices block the scissors open during service. Autoquip builds the Series 35 to ANSI MH29.1 and covers all parts with a 2 year warranty.
Lowered height is the first thing to check. The Rover lowers to 14.5" on the 24" x 48" platform and 15" on the 24" x 64" platform. Both are above the seven inches the CustomMHS lift table guide gives as the limit for loading with a pallet jack, so plan how loads will reach the platform before you choose a model.
Product Lines
The Rover comes in two platform lengths and three capacities, which makes six models. The S35-036 series has a 24" x 48" platform with 36" of travel. The S35-048 series has a 24" x 64" platform with 48" of travel. Each series is offered at 2,500, 4,000 and 6,000 lb.
Selecting the Right Model
◆ S35-036-RM series (24" x 48" platform): 14.5" lowered and 50.5" raised, with 36" of travel. Models are S35-036-0025-RM (2,500 lb), S35-036-0040-RM (4,000 lb) and S35-036-0060-RM (6,000 lb).
◆ S35-048-RM series (24" x 64" platform): 15" lowered and 63" raised, with 48" of travel. Models are S35-048-0025-RM (2,500 lb), S35-048-0040-RM (4,000 lb) and S35-048-0060-RM (6,000 lb).
◆ Capacity: Choose the platform length first, then the capacity for the heaviest load. Loaded raise and lower time rises with capacity, from 12 seconds on the 2,500 lb S35-036 to 33 seconds on the 6,000 lb S35-048.
Will a pallet jack be loading the table?
Lowered height decides how a pallet gets onto the table, so check it before capacity.
See how lowered height controls loading in the CustomMHS lift table guide.
Where Commonly UsedRover tables are commonly used where one lift is shared among several workstations or moved to the equipment being worked on, and where floor power is not available.
CustomMHS carries the full line of Autoquip Series 35 Rover mobile scissor lift tables, backed by the manufacturer’s warranty.