Autoquip TorkLift Heavy Duty Scissor Lift Tables

Autoquip describes the TorkLift as its premium series of workstation hydraulic lift tables. The CustomMHS table lists capacities from 1,500 to 30,000 lb, with travel from 24 to 72 in. and raised heights up to 84.75 in. Every model uses an internal hydraulic power unit, and platforms are at least ¼ in. steel reinforced.
Hydraulic cylindersErgonomical designUp to 30,000 pounds capacity
Get a Fast Quote →Read our Buying Guide →
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Platform Size | Travel | Capacity | Price | View Model |
|
24" wide x 36" long
|
6" to 30"
|
2,200 pounds
|
$9,291.28
|
||
|
24" wide x 48" long
|
6" to 42"
|
1,500 pounds
|
$8,972.31
|
||
|
23.5" wide x 47" long
|
6.5" to 42.5"
|
2,200 pounds
|
$10,295.42
|
||
|
23.5" wide x 47" long
|
6.5" to 42.5"
|
4,400 pounds
|
$11,193.26
|
||
|
23.5" wide x 47" long
|
7" to 43"
|
6,000 pounds
|
$12,037.91
|
||
|
45" wide x 59.5" long
|
12" to 48"
|
8,000 pounds
|
$21,216.96
|
||
|
35" wide x 62.5" long
|
14" to 50"
|
10,000 pounds
|
$51,826.79
|
||
|
35" wide x 62.5" long
|
14" to 50"
|
12,000 pounds
|
$56,202.50
|
||
|
35" wide x 70" long
|
16" to 52"
|
16,000 pounds
|
$66,060.82
|
||
|
28" wide x 65.5" long
|
8" to 56"
|
2,000 pounds
|
$14,554.18
|
||
|
28" wide x 65.5" long
|
8" to 56"
|
4,000 pounds
|
$15,475.62
|
||
|
28" wide x 65.5" long
|
9" to 57"
|
6,000 pounds
|
$17,117.68
|
||
|
28" wide x 65.5" long
|
9" to 57"
|
6,000 pounds
|
$17,117.68
|
||
|
30" wide x 77" long
|
13.25" to 61.25"
|
8,000 pounds
|
$27,454.46
|
||
|
40" wide x 80" long
|
15" to 63"
|
10,000 pounds
|
$31,181.60
|
||
|
40" wide x 80" long
|
16" to 64"
|
12,000 pounds
|
$56,066.65
|
||
|
40" wide x 80" long
|
16" to 64"
|
16,000 pounds
|
$60,207.25
|
||
|
40" wide x 80" long
|
16" to 64"
|
20,000 pounds
|
$65,357.93
|
||
|
44" wide x 84" long
|
18" to 66"
|
30,000 pounds
|
$69,362.68
|
||
|
48.5" wide x 95.75" long
|
9.75" to 69.75"
|
2,500 pounds
|
$18,375.82
|
||
|
47" wide x 82" long
|
9.75" to 69.75"
|
4,000 pounds
|
$21,116.55
|
||
|
54" wide x 97" long
|
11.75" to 71.75"
|
6,000 pounds
|
$25,345.76
|
||
|
54" wide x 99" long
|
14.5" to 74.5"
|
9,000 pounds
|
$60,608.91
|
||
|
54" wide x 99" long
|
14.5" to 74.5"
|
12,000 pounds
|
$70,402.27
|
||
|
60" wide x 100" long
|
15.5" to 75.5"
|
16,000 pounds
|
$71,648.57
|
||
|
60" wide x 100" long
|
15.5" to 75.5"
|
20,000 pounds
|
$73,887.22
|
||
|
64" wide x 104" long
|
18.5" to 78.5"
|
30,000 pounds
|
$79,085.14
|
||
|
47" wide x 108" long
|
9.75" to 81.75"
|
2,000 pounds
|
$25,446.17
|
||
|
45" wide x 100" long
|
11.25" to 83.25"
|
4,000 pounds
|
$29,569.07
|
||
|
47" wide x 108" long
|
12.75" to 84.75"
|
6,000 pounds
|
$32,735.07
|
The construction is built around load stability and serviceability. The scissor rollers are captured inside structural steel channels. Each pivot point has a spiral wound bearing that is maintenance-free and resists abrasion and uneven loads. The cylinders use two-piece self-aligning piston rods to limit side forces on the cylinders and pins, and a removable one-piece center axle pin makes inspection and service easier. Onboard maintenance devices can block the scissors open during service, and velocity fuses stop the lift if a hose ruptures. Autoquip rates the structural safety margin at 3:1 or better and lists ANSI MH29.1 among the standards for the line.
Three dimensions decide whether a model fits: lowered height, travel, and platform size. Lowered height ranges from 6 to 18.5 in., and it controls how a load gets onto the table. Travel sets how high the load can go. Platform size changes by capacity, so a larger rating usually means a larger and taller table. Compare these on the exact model before you choose a capacity.
Product Lines
The TorkLift comes in five travel groups. The 24 in. group is one model, TRK-024-0022-T1, rated 2,200 lb with a 24 x 36 in. platform and a 6 to 30 in. height range. The 36 in. group runs from 1,500 to 16,000 lb with platforms from 23.5 x 47 in. up to 45 x 59.5 in. and 35 x 70 in., lowered 6 to 16 in. and raised 42 to 52 in. The 48 in. group runs from 2,000 to 30,000 lb with platforms from 28 x 65.5 in. to 44 x 84 in., lowered 8 to 18 in. and raised 56 to 66 in. The 60 in. group runs from 2,500 to 30,000 lb with platforms from 47 to 64 in. wide and 82 to 104 in. long, lowered 9.75 to 18.5 in. and raised 69.75 to 78.5 in. The 72 in. group covers 2,000 to 6,000 lb with platforms from 45 x 100 in. to 47 x 108 in., raised 81.75 to 84.75 in.
Selecting the Right Model
◆ Start with lowered height. Models rated 6,000 lb or less lower to between 6 and 12.75 in., and only the 24 and 36 in. travel models up to 6,000 lb lower to 7 in. or less. Models rated 8,000 lb or more start at 12 in. lowered or higher, so plan a ramp, a pit, or a forklift for loading.
◆ Match travel to the working height you need. Raised heights run from 30 in. on the 24 in. model to 84.75 in. on the 72 in. models.
◆ Choose capacity with the platform in mind. The 72 in. group tops out at 6,000 lb, so loads above that need the 36, 48, or 60 in. groups.
◆ Check the platform against the load footprint. Platforms run from 24 x 36 in. to 64 x 104 in., with the longest at 47 x 108 in. on the 72 in. models.
◆ For nonstandard needs, Autoquip lists options including conveyors, handrails, skirts, toe guards, stainless construction, transport bases, enclosures, and a high-cycle package.
Will a pallet jack or forklift be able to load the table at its lowered height?
The Lift Table Buying Guide explains why lowered height is the first number to check and how it decides the loading method.
Where Commonly Used
Commonly used as heavy duty workstation lift tables that raise pallets, dies, and other heavy loads to working height.
CustomMHS carries the full line of Autoquip TorkLift scissor lift tables, backed by the manufacturer’s warranty.