Talk to an Expert: 866-333-0728
No bots. No guesswork. Real experts.

  • Your shopping cart is empty!

Menu

Metal Bulk Containers

Metal Bulk Containers, Davco Collapsible & Rigid Steel Bins

Metal bulk containers deliver the highest structural strength for heavy or demanding material handling. CustomMHS offers Davco metal bins at 40-1/2" x 34-1/2" in collapsible, rigid, and knock-down configurations, each rated for 3,200 lb capacity, to fit different storage, transport, and space-saving needs.

Product Lines Available:

♦ Davco Collapsible Metal Bin, 40-1/2" x 34-1/2", 3,200 lb capacity, collapses flat when not in use
♦ Davco Rigid Metal Bin, 40-1/2" x 34-1/2", 3,200 lb capacity, built for long-term durability
♦ Davco Knock Down Metal Bin, 40-1/2" x 34-1/2", 3,200 lb capacity, disassembles for compact storage

Selecting the Right Model:

♦ Space needs: choose Collapsible for fold-flat storage, Knock Down for full disassembly, or Rigid for permanent, always-assembled use.
♦ Durability: The Rigid Metal Bin suits long-term, heavy-duty applications where assembly time isn't a concern.
♦ Capacity: All three configurations share the same 3,200 lb capacity, so selection comes down to space and handling needs.

Where Commonly Used:

♦ Heavy Material Handling, metal construction supports the highest load capacities in this container category.
♦ Space-Constrained Storage Areas, collapsible and knock-down options reduce footprint when empty.
♦ Long-Term Bulk Storage, rigid metal bins provide durable, always-ready storage.
♦ Manufacturing and Distribution Facilities, 3,200 lb capacity supports demanding daily material handling.

CustomMHS carries the full line of Davco metal bulk containers, backed by the manufacturer's warranty.

 

Davco Collapsible & Rigid Metal Containers
buckhorn bulk containers

Davco Collapsible Metal Bin, 40-1/2" x 34-1/2"

3,200 lb. capacity metal bin that collapses flat when not in use.

 View All → 

 

 Imagem

Davco Rigid Metal Bin, 40-1/2" x 34-1/2"

3,200 lb. capacity rigid metal bin built for long-term durability.

 View All → 

 

 davco bin

Davco Knock Down Metal Bin, 40-1/2" x 34-1/2"

3,200 lb. capacity metal bin that disassembles for compact storage.

 View All → 

 

 

 

Frequently Asked Questions (FAQs)

What are metal bulk containers?
Metal bulk containers are steel bins built for the heaviest and most demanding material handling, where plastic containers would flex or fail under load. CustomMHS carries Davco metal bulk containers in a 40-1/2" x 34-1/2" footprint, offered in collapsible, rigid, and knock-down configurations, each rated for 3,200 pounds and backed by the manufacturer's warranty.
What is the difference between collapsible, knock-down, and rigid?
All three hold the same load, so the difference is what happens when the container is empty. The collapsible metal bin folds flat in place, which takes seconds and requires no tools. The knock-down bin disassembles completely into flat components for the most compact storage or shipping. The rigid metal bin stays assembled permanently, which removes the setup step entirely and gives the fewest moving parts to wear or misalign.
Which configuration should I choose?
Start with how often the container sits empty. If empties accumulate regularly and floor space is limited, the collapsible bin gives back most of that space with minimal handling time. If containers ship back long distances or get stored seasonally, the knock-down bin packs down the smallest. If the bin stays loaded and in service, choose rigid, since collapsibility adds cost and hinge points you would never use.
Why choose metal over plastic bulk containers?
Steel handles sharp, abrasive, and very dense material that would score, gouge, or crack a plastic wall over time, which makes it the practical choice for castings, machined parts, metal scrap, and similar loads. Steel also holds its shape under concentrated point loads rather than bulging, so stacked containers stay square. Plastic remains the better option where weight, corrosion resistance, or washdown cleaning are the driving factors.
How do metal bulk containers help your facility?
The 3,200 pound rating lets a single container carry dense material that would exceed lighter duty boxes, so fewer container moves are needed to stage the same tonnage, which reduces forklift trips and the congestion that comes with them. Steel construction also holds up to years of forklift contact and rough loading without the wall damage that shortens container life, which lowers replacement spending over time. Because all three configurations share one footprint and one capacity, you can mix collapsible, knock-down, and rigid units across departments while keeping a single handling standard for your equipment and racking.

Built for Manufacturers, Warehouses &
Industrial Facilities

CustomMHS is an authorized distributor of industrial storage and material handling equipment for manufacturers, warehouses, distribution centers,
and industrial facilities across North America. From shelving systems and pallet racking to storage containers, workbenches, carts, security fencing, and cabinets,
we carry industrial-grade brands and help you choose the right specs, load ratings, and configuration for your facility, workflow, and space before you order.