Eagle Group Stainless Steel Cantilever Gowning Rack

Eagle Group Stainless Cantilever Gowning Rack

The Eagle Group Stainless Cantilever Gowning Rack features a 1-1/2-inch welded tube frame that ships knocked down and is bolted together with cross members, available in electropolished or brushed 300-series stainless steel, with non-removable or removable hangers. Nylon dissipative feet come standard, and hanger slots are standard on 3-inch centers, with other spacing available.

Fourteen-gauge hanger rails have hanger slots spaced on standard 3-inch centers. The slots are designed to retain gowns in a fixed position by allowing the hangers (not included) to swing front-to-back but not left-to-right, while the shape facilitates smoother laminar flow than many square hanger rails.

Vertical supports are constructed of heavy-gauge Type 304 stainless steel 1-1/2 inch square tubing, fully welded, ground, and polished to its original finish. Each unit includes four adjustable feet constructed to dissipate a static charge. Horizontal supports are bolted to vertical uprights using stainless steel bolts and are constructed of 1-inch outside-diameter Type 304 stainless steel tubing with a heavy-gauge stainless steel backing plate, with the bolts covered by a stainless steel cap to eliminate crevices where dust might settle.

Selection Guide:

♦ 48" long, 16 hanger slots: available in Stainless Non-Removable (S2448-CGRN), Electropolished Stainless Non-Removable (EP2448-CGRN), Stainless Removable (S2448-CGRR), or Electropolished Stainless Removable (EP2448-CGRR)
♦ 60" long, 20 hanger slots: available in Stainless Non-Removable (S2460-CGRN), Electropolished Stainless Non-Removable (EP2460-CGRN), Stainless Removable (S2460-CGRR), or Electropolished Stainless Removable (EP2460-CGRR)
♦ 72" long, 24 hanger slots: available in Stainless Non-Removable (S2472-CGRN), Electropolished Stainless Non-Removable (EP2472-CGRN), Stainless Removable (S2472-CGRR), or Electropolished Stainless Removable (EP2472-CGRR)
♦ 84" long, 28 hanger slots: available in Stainless Non-Removable (S2484-CGRN), Electropolished Stainless Non-Removable (EP2484-CGRN), Stainless Removable (S2484-CGRR), or Electropolished Stainless Removable (EP2484-CGRR)

All models are 24"W x 75"H.

Selecting the Right Model:

♦ Length: choose from 48" up to 84" based on the number of garments the rack needs to hold.
♦ Hanger permanence: choose Removable hangers for adjustable configurations or Non-Removable for a fixed, tamper-resistant setup.
♦ Finish: choose standard Stainless for general cleanroom use, or Electropolished for the most demanding sanitation requirements.

Where Commonly Used:

♦ Cleanroom Gowning Areas: cantilever design supports organized garment staging.
♦ GMP and Pharmaceutical Facilities: electropolished finish options support strict sanitation standards.
♦ Laminar Flow Environments: hanger rail design reduces disruption to controlled airflow.
♦ Multi-User Gowning Corridors, longer models with more hanger slots, support higher-traffic gowning areas.

CustomMHS carries the full line of Eagle Group stainless steel cleanroom equipment, backed by the manufacturer's warranty.