WireCrafters Style 840 RapidWire Security Cage, 2-Wall

WireCrafters Style 840 RapidWire Security Cage (2-Wall), 10-Gauge Welded Wire, 2" x 2" Mesh, Modular Bolt-Together Panels

The WireCrafters 2-Wall Style 840 Medium-Duty Security Cage is a modular welded-wire partition system designed for fast, professional installation of tool cribs and security cages. Constructed from 10-gauge wire welded into a 2" x 2" square mesh, Style 840 provides strong perimeter security while remaining lighter and more open than woven wire or chain-link alternatives, improving visibility inside the secured area and keeping the space from feeling boxed in.

WireCrafters panels are fully framed, welded-wire sections that bolt together section by section, making installation straightforward. Most maintenance departments can install these partitions with standard hand tools, bolting panels to posts without special equipment. The modular design also makes it easy to build walls and ceilings with the same panel sizes, stack panels to reach your tool crib's required height, and adjust later if your layout changes.

Door flexibility is built in, with options for hinged, double-hinged, and sliding doors to match traffic flow and access needs. The open yet secure design allows light, HVAC airflow, and fire suppression coverage to circulate and function normally throughout the secured space.

2" x 2" welded wire is usually enough when:

♦ The goal is separation and traffic control rather than theft prevention, such as walling off a storage room, an equipment area, or a contractor space.
♦ Contents are bulky, low-value, or hard to move by hand.
♦ Budget and installation speed carry more weight than security rating.
♦ Access control comes mainly from the door and the lock rather than the panel itself.

When to Use 2" x 1" Woven Wire Over 2" x 2" Welded Wire

Both mesh types stop casual access, but they fail differently and protect against different threats. The first question is whether the barrier is providing security or separation.

Woven mesh interlocks at every crossing rather than fusing. Cutting one strand doesn't open a hole because the surrounding weave still holds the pattern in place. Welded mesh relies on the weld at each intersection, so breaking a few welds can open a gap faster. The 2" x 1" opening also matters as much as the wire itself. A 1-inch dimension blocks a hand and forearm, preventing you from reaching through to a latch, a lock, or the inventory sitting just inside the line. A 2" x 2" opening does not.

Where Commonly Used:

♦ Tool Cribs and Fast Storage Builds: the modular bolt-together design supports quick installation.
♦ Warehouses and Manufacturing Facilities: medium-duty welded mesh suits general secure storage needs.
♦ Maintenance Teams and Facility Expansions: standard hand tools allow installation without special equipment.
♦ Ventilated Secure Storage: the open mesh structure supports HVAC and fire suppression circulation.

CustomMHS carries the full line of WireCrafters RapidWire security cages, backed by the manufacturer's warranty.