s

The Hallowell 5526 bin shelving unit provides 21 openings per unit, each 12" wide by 12" high, uniform across all positions. Compared to the 5525's 14 openings at 18" wide, the 5526 offers 50% more storage positions in the same 36" wide x 87" high footprint by using a 12" opening width instead of 18". All units are 36" wide x 87" high. Three depth options are available: 12", 18", and 24".

The 5526 is the correct choice when stored items fit within a 12"-wide opening and a higher position count per unit is needed compared to the 5525. Starter units stand alone or begin a row. Add-on units share a side panel with an adjacent unit to extend the row. 

Selecting the Right Depth:

♦ 12" depth, suited for items that do not require more than 12" of front-to-back clearance. Minimum floor footprint.

♦ 18" depth, standard depth for most bin shelving applications. Accommodates boxed parts, containers, and supplies that fit within a 12" wide x 12" high opening at 18" depth.

♦ 24" depth, deepest option. Suited for larger items or higher per-opening volume.

♦ 5526 vs. 5525, choose 5526 when 12"-wide openings are appropriate, and more positions per unit are needed. Choose 5525 when items require the wider 18" opening.

♦ 5526 vs. 5536, both models have (21) 12" x 12" openings. 

♦ Starter vs. add-on units: Order one starter unit per row. Add-on units share a side panel and cannot stand alone.

Where Commonly Used:

♦ Parts Counter and Maintenance Room Supply Organization, parts counters and maintenance rooms organizing medium-sized packaged parts, boxed components, and supplies in 21 labeled 12"-wide positions, using the 5526 for a clean, consistent location-based layout that supports fast picking and accurate restocking.

♦ Stockrooms managing a High Variety of Medium Parts, stockrooms managing many distinct part numbers in the 12"-wide range use the 5526's 21 positions per unit to assign each part type its own location without needing the wider 18" openings of the 5525.

♦ Production Line Component Staging, production areas staging medium-sized components at the line use the 5526 to create a consistent, labeled staging layout where each component type has a defined position visible to both the line worker and the material handler replenishing from the aisle.

CustomMHS is an authorized Hallowell distributor. All purchases include the manufacturer's factory warranty.