Hallowell 5530 Hi-Tech Bin Shelving, 54 Openings With Bin Fronts

The Hallowell 5530 is a Hi-Tech bin shelving unit with 54 compartments, all 6" wide, arranged six across on nine shelves in a unit 36" wide by 87" high. Forty eight openings are 9" high and the six on the bottom shelf are 12" high. The 5530 has the same opening layout as the 5528, and the difference is that every 5530 opening has a 3" high bin front, a lip across the bottom of the opening that keeps loose parts from sliding out, where the 5528 openings are open at the front.
48 openingsClosed sides and backShelf dividers are individually adjustable side to side
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Size | Shelving Type | Openings | Price | View Model |
|
36" wide x 12" deep x 87" high
|
Starter Unit
|
54
|
$853.90
|
||
|
36" wide x 12" deep x 87" high
|
Add-on Unit
|
54
|
$794.28
|
||
|
36" wide x 18" deep x 87" high
|
Starter Unit
|
54
|
$956.11
|
||
|
36" wide x 18" deep x 87" high
|
Add-on Unit
|
54
|
$890.09
|
||
|
36" wide x 24" deep x 87" high
|
Starter Unit
|
54
|
$1,100.90
|
||
|
36" wide x 24" deep x 87" high
|
Add-on Unit
|
54
|
$926.31
|
The unit is built on 14 gauge posts with 20 gauge shelves and dividers, powder coated in Hallowell gray, and Hallowell rates the whole unit at 800 lb. Because that figure covers all 54 openings together, it is the number to size against, not a per shelf rating. The layout is fixed by the model and is not changed in the field.
The 5530 comes 12", 18" or 24" deep. Each depth is sold as a starter unit, which stands alone, and an add-on unit (A5530), which shares a side panel with the unit beside it and cannot stand alone. The CustomMHS shelving guide explains how a per unit rating differs from a per shelf rating before you compare bin shelving with ordinary Hi-Tech shelving.
Product Lines
CustomMHS carries six Hallowell 5530 units: 5530-12, 5530-18 and 5530-24 starters and A5530-12, A5530-18 and A5530-24 add-ons. All six have 54 openings with 3" bin fronts, 48 at 6" x 9" and 6 at 6" x 12", and measure 36" wide by 87" high; the suffix is the depth.
Selecting the Right Model
◆ 5530-12 and A5530-12 (12" deep): For loose fasteners, washers and small electronic parts that would roll off an open shelf.
◆ 5530-18 and A5530-18 (18" deep): For most loose small parts, with room for a second row of the same item behind the front.
◆ 5530-24 and A5530-24 (24" deep): For long loose parts and the most volume per opening.
◆ 5530 or 5528: Choose the 5530 when parts are loose and need a lip to hold them in. Choose the 5528 when parts are boxed or bagged and an open front is easier to pick from.
◆ Starter or add-on: Buy one starter for each row, then add-on units for every bay after the first.
What is the difference between the 5530 and the 5528?
The same 54 opening layout, but the 5530 has a 3" high bin front on every opening so loose parts stay in, while the 5528 is open at the front.
See how to read a per shelf rating in the CustomMHS shelving guide, since both units are rated 800 lb for the whole unit.
Where Commonly Used
The 5530 is commonly used in fastener and hardware stockrooms, electronics assembly areas and kitting stations where loose small parts are scooped from the opening and need a lip to keep them in place.
CustomMHS carries the full line of Hallowell 5530 Hi-Tech bin shelving, backed by the manufacturer’s warranty.