Hallowell DuraTech Pass-Thru Steel Shelving

Pass-thru shelving is steel shelving built without sway braces or back panels, so items can be loaded from one aisle and picked from the other, or reached from any of the four sides. Hallowell DuraTech does this by bolting its 18 gauge top and bottom shelves to four 14 gauge angle posts with shoulder bolts, which squares and stiffens the unit without the diagonal braces that standard open shelving needs. The intermediate shelves sit on 13 gauge clips in posts punched on 1-1/2" centers, so they adjust independently.
Up to 800 lb per shelfOpen sides and backBeaded front posts, angle back posts and T-posts
Get a Fast Quote →Read the Buying Guide →
![]()
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Size | Shelves | Shelf Capacity | Price | View Model |
|
36" wide x 12" deep x 87" tall
|
5
|
800 pounds
|
$227.83
|
||
|
36" wide x 18" deep x 87" tall
|
5
|
800 pounds
|
$257.66
|
||
|
36" wide x 24" deep x 87" tall
|
5
|
800 pounds
|
$313.02
|
||
|
48" wide x 12" deep x 87" tall
|
5
|
400 pounds
|
$266.18
|
||
|
48" wide x 18" deep x 87" tall
|
5
|
450 pounds
|
$325.83
|
||
|
48" wide x 24" deep x 87" tall
|
5
|
500 pounds
|
$370.53
|
||
|
36" wide x 12" deep x 87" tall
|
7
|
800 pounds
|
$276.83
|
||
|
36" wide x 18" deep x 87" tall
|
7
|
800 pounds
|
$315.15
|
||
|
36" wide x 24" deep x 87" tall
|
7
|
800 pounds
|
$353.48
|
||
|
48" wide x 12" deep x 87" tall
|
7
|
400 pounds
|
$325.83
|
||
|
48" wide x 18" deep x 87" tall
|
7
|
450 pounds
|
$410.98
|
||
|
48" wide x 24" deep x 87" tall
|
7
|
500 pounds
|
$470.60
|
||
|
36" wide x 12" deep x 87" tall
|
8
|
800 pounds
|
$298.12
|
||
|
36" wide x 18" deep x 87" tall
|
8
|
800 pounds
|
$344.97
|
||
|
36" wide x 24" deep x 87" tall
|
8
|
800 pounds
|
$387.56
|
||
|
48" wide x 12" deep x 87" tall
|
8
|
400 pounds
|
$357.74
|
||
|
48" wide x 18" deep x 87" tall
|
8
|
450 pounds
|
$455.70
|
||
|
48" wide x 24" deep x 87" tall
|
8
|
500 pounds
|
$521.71
|
Every DuraTech unit is 87" high and comes as a complete, stand alone unit with its top and bottom shelves plus 3, 5 or 6 adjustable intermediate shelves. The intermediate shelves have tubular front and rear edges and side channels, and they are punched to accept shelf dividers and other accessories. Foot plates and shim plates are supplied for anchoring and leveling, and the finish is Hallowell 725 gray.
Hallowell rates the shelving per shelf with the load evenly distributed. The 36" wide units hold 800 lb per shelf at every depth. The 48" wide units hold 400 lb per shelf at 12" deep, 450 lb at 18" deep and 500 lb at 24" deep. A unit’s total capacity is the per shelf figure times the number of shelves.
Product Lines
The DuraTech line on this page has 18 units: two widths (36" and 48"), three depths (12", 18" and 24") and three shelf counts (5, 7 and 8). In Hallowell’s numbering, DT55 is 36" wide and DT57 is 48" wide, the next two digits set the shelf count (10 for 5 shelves, 12 for 7 shelves, 13 for 8 shelves), and the suffix is the depth. Because the units stand on their own, there are no separate starter and add-on models.
Selecting the Right Model
◆ 5-shelf units (3 adjustable shelves): DT5510-12, -18 and -24 at 800 lb per shelf; DT5710-12 at 400 lb, DT5710-18 at 450 lb and DT5710-24 at 500 lb per shelf.
◆ 7-shelf units (5 adjustable shelves): DT5512-12, -18 and -24 at 800 lb per shelf; DT5712-12 at 400 lb, DT5712-18 at 450 lb and DT5712-24 at 500 lb per shelf.
◆ 8-shelf units (6 adjustable shelves): DT5513-12, -18 and -24 at 800 lb per shelf; DT5713-12 at 400 lb, DT5713-18 at 450 lb and DT5713-24 at 500 lb per shelf.
◆ Width: Choose 36" wide when per shelf capacity matters most. Choose 48" wide for longer items, and check that the lower per shelf rating covers the load.
◆ Placement: Pass-thru shelving earns its keep in the middle of a floor or between two aisles. Against a wall, standard open shelving does the same job.
Can you pick from both sides of DuraTech shelving?
Yes. There are no cross braces or back panels, so every shelf is open on all four sides, and the 1-1/2" post slots let each shelf be set to a different height.
See how to read a per shelf rating in the CustomMHS shelving guide before you pick a size.
Where Commonly Used
Pass-thru shelving is commonly used between two aisles, at packing stations and in work cells where stock is loaded from one side and picked from the other.
CustomMHS carries the full line of Hallowell DuraTech pass-thru steel shelving, backed by the manufacturer’s warranty.