Hallowell Hi-Tech Closed Bin Shelving System
Bin shelving is closed steel shelving divided into fixed, open front compartments, so every small part has its own labeled slot and can be seen and picked without opening a door or moving a bin. Hallowell builds its Hi-Tech bin shelving on 14 gauge posts with 20 gauge shelves and dividers, in a 36" wide by 87" high unit that comes 12", 18" or 24" deep. Each of the twelve models (5525 through 5536) is a fixed layout of opening widths and heights, from 14 large 18" x 12" openings to 78 small 6" x 6" and 6" x 9" openings.
14 to 78 openingsClosed sides and backShelf dividers are individually adjustable side to side
Get a Fast Quote →Read the Buying Guide →
![]() Hallowell Bin Shelving with 14 Openings, Model 5525
|
![]() Hallowell Bin Shelving with 14 Openings, Model 5526
|
![]() Hallowell Bin Shelving with 36 Openings, Model 5527
|
![]() Hallowell Bin Shelving with 54 Openings, Model 5528
|
||||
![]() Hallowell Bin Shelving with 78 Openings, Model 5529
|
![]() Hallowell Bin Shelving with 48 Openings, Model 5530
|
![]() Hallowell Bin Shelving with 29 Openings, Model 5531
|
![]() Hallowell Bin Shelving with 21 Openings, Model 5532
|
||||
![]() Hallowell Bin Shelving with 16 Openings, Model 5533
|
![]() Hallowell Bin Shelving with 24 Openings, Model 5534
|
![]() Hallowell Bin Shelving with 38 Openings, Model 5535
|
Hallowell Bin Shelving with 36 Openings, Model 5536
|
The layout is set by the model and is not adjusted in the field, so the model is chosen to match the mix of part sizes. Hallowell lists the whole unit load capacity at 800 lb, which is the figure to size against, because the load is spread over many small shelves rather than a few large ones. Units are finished in Hallowell gray powder coat.
Each model is sold as a starter unit, which stands alone, and an add-on unit (A prefix), which shares a side panel with the unit beside it and cannot stand alone. The CustomMHS shelving guide explains how a per unit rating differs from a per shelf rating before you compare bin shelving with ordinary Hi-Tech shelving.
Product Lines
CustomMHS carries twelve Hallowell bin shelving models in three depths, each as a starter and an add-on. Three models use a single opening size (5525 at 18" x 12", 5526 and 5536 at 12" x 12"), and nine mix two to four opening sizes. Model 5529, with 66 openings at 6" x 6" and 12 at 6" x 9", has the most openings at 78.
Selecting the Right Model
◆ Large parts, single size: 5525 (14 openings at 18" x 12") or 5526 and 5536 (21 openings at 12" x 12").
◆ Small parts, highest count: 5529 (66 at 6" x 6" plus 12 at 6" x 9", 78 total) or 5528 and 5530 (48 at 6" x 9" plus 6 at 6" x 12", 54 total).
◆ Mixed small and medium parts: 5527 (32 at 9" x 9" plus 4 at 9" x 12"), 5531 (16 at 9" x 9", 4 at 9" x 12" and 9 at 12" x 12") or 5534 and 5535 (four sizes from 6" to 18" wide).
◆ Mixed medium and large parts: 5532 (12 at 12" x 9", 3 at 12" x 12" and 6 at 18" x 12") or 5533 (9 at 12" x 12", 6 at 18" x 12" and one 36" x 12" opening for the largest items).
◆ Depth: Choose 12" for the smallest hardware, 18" for most fittings and consumables, and 24" for long parts, since a deeper opening holds more of the same part.
◆ Starter or add-on: Buy one starter for each row, then add-on units for every bay after the first.
How many openings do I need?
Count the part numbers that need their own slot, then pick the model whose opening sizes match the biggest items. A 78 opening unit holds the most part numbers; a 14 opening unit holds the bulkiest.
See how to read a per shelf rating in the CustomMHS shelving guide, since bin shelving is rated per unit.
Where Commonly Used
Bin shelving is commonly used in hardware and fastener stockrooms, maintenance parts rooms, electronics component storage and kitting areas where each small part needs its own labeled, visible position.
CustomMHS carries the full line of Hallowell Hi-Tech bin shelving, backed by the manufacturer’s warranty.











