Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

Husky 42x120 Add-On Pallet Racking Section

Husky 42x120 Add-on Pallet Racking Section

A Husky 42x120 add-on pallet racking section is the bay that extends an existing row of Husky Invincible teardrop pallet rack: it ships with one IU18420120 upright frame measuring 42 inches deep by 120 inches high, two pairs of Husky IBX, IBN or IBH step beams, and the Bowlock clips that lock each beam to the frame. An add-on has one frame instead of two because it bolts its beams to the open side of the frame already standing at the end of the row, so each add-on shares a frame with its neighbor. A row of five bays is one starter section plus four add-ons, and every add-on must match the depth, height and column of the starter it joins. The 42 inch frame depth is sized for standard 48 inch GMA pallets, which overhang the front and rear beams by three inches on each side by design.

Add-on unit, extends an existing rowUS made high strength steel, ASTM A1011-GR55 Usually ships in 3-4 days

Get a Fast Quote →Read our Buying Guide →

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number Unit Type Dimensions Beam Cap/Pair Price 1-9 each, Qty Breaks View Model
2 Upper Levels, Wire Decking
42"D x 120"H x 48"W
7,383 lbs.
$380.28
2 Upper Levels, No Decking
42"D x 120"H x 48"W
7,383 lbs.
$298.87
2 Upper Levels, Wire Decking
42"D x 120"H x 96"W
4,044 lbs.
$546.49
2 Upper Levels, No Decking
42"D x 120"H x 96"W
4,044 lbs.
$382.04
2 Upper Levels, Wire Decking
42"D x 120"H x 96"W
5,047 lbs.
$551.82
2 Upper Levels, No Decking
42"D x 120"H x 96"W
5,047 lbs.
$387.29
2 Upper Levels, Wire Decking
42"D x 120"H x 96"W
6,111 lbs.
$562.37
2 Upper Levels, Wire Decking
42"D x 120"H x 108"W
5,000 lbs.
$604.81
2 Upper Levels, No Decking
42"D x 120"H x 96"W
6,111 lbs.
$397.90
2 Upper Levels, No Decking
42"D x 120"H x 108"W
5,000 lbs.
$420.95
2 Upper Levels, Wire Decking
42"D x 120"H x 108"W
8.873 lbs.
$659.70
2 Upper Levels, No Decking
42"D x 120"H x 108"W
8.873 lbs.
$475.77
2 Upper Levels, Wire Decking
42"D x 120"H x 120"W
4,062 lbs.
$638.48
2 Upper Levels, No Decking
42"D x 120"H x 120"W
4,062 lbs.
$442.15
2 Upper Levels, Wire Decking
42"D x 120"H x 144"W
3,000 lbs.
$733.97
2 Upper Levels, No Decking
42"D x 120"H x 144"W
3,000 lbs.
$486.32
2 Upper Levels, Wire Decking
42"D x 120"H x 144"W
5,569 lbs.
$809.99
2 Upper Levels, No Decking
42"D x 120"H x 144"W
5,569 lbs.
$562.37
2 Upper Levels, Wire Decking
42"D x 120"H x 144"W
7,820 lbs.
$882.50
2 Upper Levels, No Decking
42"D x 120"H x 144"W
7,820 lbs.
$636.66

The IU18420120 upright is the standard Husky Invincible column: 14 gauge roll-formed steel measuring 3 inches by 1-5/8 inches with teardrop punching on 2 inch centers, so beam levels adjust in 2 inch steps. Husky rates the frame at 18,160 pounds at 48 inch vertical beam spacing. That number is the total load the pair of columns can carry with beams every 48 inches, and the rating drops as beam levels are spaced farther apart; with only two levels on a 120 inch frame the spacing is often wider than 48 inches, so the frame carries less than the published figure. On a shared frame in the middle of a row, the total includes the load from both neighboring bays. Frames are finished green and beams orange. Each beam pair is rated separately, and the beam rating, not the frame rating, is normally what limits how much goes on a single level. The capacities in the table below are per pair of beams, evenly distributed across both beams.

Every add-on in this category has two beam levels (the “2” in the model number) and comes with or without wire decking. The 120 inch height over the 96 inch frame buys room for taller pallet loads on two levels or for a third level added later with a separate beam pair. Wire decking lays across the two beams of a level to support cartons, drums and odd-sized loads that would otherwise sit on open beams, and it lets sprinkler water pass through. Add-ons are offered in 48, 96, 108, 120 and 144 inch bay widths so a row can mix widths as long as every bay shares the same frame: a 96 inch bay holds two 40 inch wide pallets, a 108 inch bay holds two 48 inch pallets, a 144 inch bay holds three 40 inch pallets.


Product Lines:
All twenty add-ons in this category share the Husky IU18420120 frame, so the model number changes only by beam and decking. Read IU18420120-IBX43096-2AW left to right: IU18 marks the 3 by 1-5/8 inch column, 420120 is the 42 inch deep by 120 inch high frame, IBX43096 is a 4-3/8 inch tall step beam 96 inches long, 2A means two beam levels in an add-on section (a starter would read 2S), and a W on the end means wire decking is included. IBX beams are the standard Husky step beam, IBN beams are the heavier 5-1/2 inch profile, and the IBH60144 is a 6 inch beam for the heaviest 144 inch spans.

Per pair beam capacities by bay width: 48 inch bays use the IBX30048 beam rated 7,383 pounds. 96 inch bays use the IBX35096 at 4,044 pounds, the IBX39096 at 5,047 pounds, or the IBX43096 at 6,111 pounds. 108 inch bays use the IBX43108 at 5,000 pounds or the IBN55108 at 8,873 pounds. 120 inch bays use the IBX43120 at 4,062 pounds. 144 inch bays use the IBX43144 at 3,000 pounds, the IBN55144 at 5,569 pounds, or the IBH60144 at 7,820 pounds. Each beam is available with wire decking (2AW) or without (2A).


Selecting the Right Model:
◆ Match the add-on to the starter. The frame number before the first hyphen (IU18420120) must be identical to the starter’s frame number, or the beams will not land at the same height and the shared frame will carry two different ratings.
◆ Count bays, not frames. A row of N bays needs one starter and N minus 1 add-ons. Buying a starter for every bay wastes a frame per bay and adds 3 inches of width each time.
◆ Start with the heaviest pallet you will store, double it for a two-pallet bay or triple it for a three-pallet bay, and pick a beam pair rated above that total. The beam rating is per pair and assumes the load is spread evenly across both beams.
◆ Remember that a shared frame carries load from both neighboring bays, and that two levels on a 120 inch frame usually sit more than 48 inches apart. Confirm the reduced frame rating with Husky before loading heavy beams on both sides of one frame.
◆ Choose bay width by pallets per level. A 96 inch bay fits two 40 inch pallets, a 108 inch bay fits two 48 inch pallets, and a 144 inch bay fits three 40 inch pallets, each with about 4 inches of clearance. Widths can vary down a row as long as the frame is the same.
◆ Add wire decking (the 2AW models) if you will ever place cartons, drums or loose items on the rack, or if your fire code or insurer asks for open decking under sprinklers. Wire decking does not raise the beam capacity.


Can I add a third beam level to a Husky 42x120 add-on section later?

Yes, as long as the extra beam pair is a Husky Invincible teardrop beam and the frame total stays within its rating: the IU18420120 frame is 120 inches high with teardrop slots on 2 inch centers, so a third pair of beams clips in anywhere the loads allow, and three levels on a 10 foot frame puts beams about 38 inches apart, inside the 48 inch spacing behind the 18,160 pound frame rating. The catch is the total: three levels of 6,111 pound IBX43096 beams fully loaded is 18,333 pounds, already over the frame rating before the neighboring bay’s share is counted, so adding a level usually means lighter loads per level. The add-on ships with one frame, two beam pairs rated 3,000 to 8,873 pounds per pair, and Bowlock clips. The CustomMHS pallet racking guide explains why every capacity has a condition attached (guide section 1), how frames, beams and bays make up a row (section 2), anchoring and load plaques that must be updated when levels change (section 7 and section 8), and why wire decking is rated for distributed loads (section 10).


Where Commonly Used:
Husky 42x120 add-on pallet rack sections are used to extend existing rows of Husky 42 inch deep, 120 inch high rack in warehouses, distribution centers and manufacturing plants that store standard 48 inch pallets on two forklift-accessible beam levels with room to grow.

CustomMHS carries the full line of Husky Invincible pallet rack, backed by the manufacturer’s warranty.

Frequently Asked Questions (FAQs)

What is a Husky 42x120 add-on pallet racking unit used for?

A Husky 42x120 add-on pallet racking unit is designed to expand an existing pallet rack row in warehouse and industrial storage environments. It connects to a starter bay to add more pallet storage space without requiring a full independent rack section. Add-on units are ideal for increasing capacity while maintaining a consistent rack layout. They help warehouses scale storage efficiently as inventory grows.

How does the 42x120 size support expandable warehouse storage?

The deeper rack depth provides extra space for larger pallets and bulk inventory loads, while the wide span offers increased horizontal storage capacity per level. This makes it well-suited for facilities handling oversized goods or high-volume palletized inventory. The size increases storage density without increasing floor space. It delivers strong, flexible storage performance for growing operations.

Why are add-on bays important in modular pallet racking systems?

Add-on bays allow warehouses to extend existing pallet rack systems without rebuilding or replacing the original structure. They provide a cost-effective way to expand storage while keeping layouts uniform and organized. This modular approach supports long-term growth planning. Add-on units make it simple to adapt racking systems to changing inventory demands.

What types of facilities benefit most from Husky add-on pallet racking?

Add-on pallet racking is commonly used in distribution centers, manufacturing plants, fulfillment warehouses, and bulk storage facilities. Any operation needing to increase palletized inventory storage benefits from expandable rack sections. These units maximize vertical storage while keeping products accessible. They are essential for high-density warehouse environments.

How does pallet rack expansion improve workflow and organization?

Expanding pallet racking creates more defined storage locations, reducing floor clutter and improving traffic flow for forklifts and workers. Additional rack space supports faster picking, easier replenishment, and better inventory control. It also reduces overcrowding that can lead to product damage. A well-planned expansion improves efficiency and warehouse safety.

Why purchase Husky add-on pallet racking from CustomMHS.com?

CustomMHS.com helps you select the correct add-on configuration to match your existing Husky pallet rack system. Instead of guessing compatibility, you get expert guidance to ensure a safe, seamless expansion. A properly planned add-on bay improves capacity, organization, and long-term durability. Purchasing from CustomMHS.com is the straightforward choice for expandable warehouse storage done right.

Is the manufacturer’s warranty included with my purchase?

Yes. All products sold on CustomMHS.com include the original manufacturer’s warranty unless otherwise noted. Custom MHS is an authorized dealer for the brands we carry, which means your purchase is covered by the manufacturer's full factory warranty.

Do you ship nationwide?

Yes. We ship throughout the United States and Canada using trusted freight partners experienced in handling industrial equipment. Our team coordinates shipping details to ensure safe and efficient delivery.