Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

Husky 42x192 Starter Pallet Racking Section, SU29 13 Gauge Frame

Husky 42x192 Starter Pallet Racking | SU29 Upright Frame

A Husky 42x192 SU29 starter pallet racking section is a complete, freestanding bay of Husky teardrop pallet rack built on two SU29420192 welded upright frames measuring 42 inches deep by 192 inches high, with three or four pairs of Husky IBX, IBN or IBH step beams locked in place by Bowlock clips. The SU29 frame is the heaviest of the three 42x192 frames CustomMHS sells. Its columns are 3 inch by 3 inch steel tubing in 13 gauge, one gauge thicker than the 14 gauge 3 by 3 inch IU24 column and a different shape entirely from the 3 by 1-5/8 inch IU18 column. On a 16 foot frame that may carry four loaded beam levels and take forklift contact at the base for years, the thicker column is what a shopper is paying for.

Starter unit, stand alone unit or to start a rowUS made high strength steel, ASTM A1011-GR55 Usually ships in 3-4 days

Get a Fast Quote →Read our Buying Guide →

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number Unit Type Dimensions Beam Cap/Pair Price 1-9 each, Qty Breaks View Model
4 Upper Levels, No Decking
42"D x 192"H x 144"W
7,820 lbs.
$1,681.94
3 Upper Levels, Wire Decking
42"D x 192"H x 48"W
7,383 lbs.
$1,008.08
3 Upper Levels, No Decking
42"D x 192"H x 48"W
7,383 lbs.
$886.04
4 Upper Levels, Wire Decking
42"D x 192"H x 48"W
7,383 lbs.
$1,119.53
4 Upper Levels, No Decking
42"D x 192"H x 48"W
7,383 lbs.
$955.02
3 Upper Levels, Wire Decking
42"D x 192"H x 96"W
4,044 lbs.
$1,268.09
3 Upper Levels, No Decking
42"D x 192"H x 96"W
4,044 lbs.
$1,022.29
4 Upper Levels, Wire Decking
42"D x 192"H x 96"W
4,044 lbs.
$1,466.15
4 Upper Levels, No Decking
42"D x 192"H x 96"W
4,044 lbs.
$1,138.95
3 Upper Levels, Wire Decking
42"D x 192"H x 96"W
5,047 lbs.
$1,280.47
3 Upper Levels, No Decking
42"D x 192"H x 96"W
5,047 lbs.
$1,034.61
4 Upper Levels, Wire Decking
42"D x 192"H x 96"W
5,047 lbs.
$1,480.29
4 Upper Levels, No Decking
42"D x 192"H x 96"W
5,047 lbs.
$1,153.11
3 Upper Levels, Wire Decking
42"D x 192"H x 96"W
6,111 lbs.
$1,292.85
3 Upper Levels, No Decking
42"D x 192"H x 96"W
6,111 lbs.
$1,046.97
4 Upper Levels, Wire Decking
42"D x 192"H x 96"W
6,111 lbs.
$1,496.23
4 Upper Levels, No Decking
42"D x 192"H x 96"W
6,111 lbs.
$1,169.03
3 Upper Levels, Wire Decking
42"D x 192"H x 108"W
5,000 lbs.
$1,345.89
3 Upper Levels, No Decking
42"D x 192"H x 108"W
5,000 lbs.
$1,080.62
4 Upper Levels, Wire Decking
42"D x 192"H x 108"W
5,000 lbs.
$1,566.95
4 Upper Levels, No Decking
42"D x 192"H x 108"W
5,000 lbs.
$1,216.83
3 Upper Levels, Wire Decking
42"D x 192"H x 108"W
8,873 lbs.
$1,441.43
3 Upper Levels, No Decking
42"D x 192"H x 108"W
8,873 lbs.
$1,181.42
4 Upper Levels, Wire Decking
42"D x 192"H x 108"W
8,873 lbs.
$1,699.62
4 Upper Levels, No Decking
42"D x 192"H x 108"W
8,873 lbs.
$1,349.41
3 Upper Levels, Wire Decking
42"D x 192"H x 120"W
4,062 lbs.
$1,427.23
3 Upper Levels, No Decking
42"D x 192"H x 120"W
4,062 lbs.
$1,115.95
4 Upper Levels, Wire Decking
42"D x 192"H x 120"W
4,062 lbs.
$1,678.33
4 Upper Levels, No Decking
42"D x 192"H x 120"W
4,062 lbs.
$1,260.97
3 Upper Levels, Wire Decking
42"D x 192"H x 144"W
3,000 lbs.
$1,556.36
3 Upper Levels, No Decking
42"D x 192"H x 144"W
3,000 lbs.
$1,188.49
4 Upper Levels, Wire Decking
42"D x 192"H x 144"W
3,000 lbs.
$1,851.72
4 Upper Levels, No Decking
42"D x 192"H x 144"W
3,000 lbs.
$1,360.05
3 Upper Levels, Wire Decking
42"D x 192"H x 144"W
5,569 lbs.
$1,681.94
3 Upper Levels, No Decking
42"D x 192"H x 144"W
5,569 lbs.
$1,319.37
4 Upper Levels, Wire Decking
42"D x 192"H x 144"W
5,569 lbs.
$2,026.86
4 Upper Levels, No Decking
42"D x 192"H x 144"W
5,569 lbs.
$1,535.14
3 Upper Levels, No Decking
42"D x 192"H x 144"W
7,820 lbs.
$1,441.43

A starter section is the first bay in a row of pallet rack. It stands on its own, and every bay added after it shares one of its frames, which is why add-on sections ship with one frame instead of two. Each upright adds 3 inches to the overall row length. The 42 inch frame depth is sized for standard 48 inch GMA pallets loaded 42 inches deep so the pallet overhangs the front and rear beams by three inches on each side. Teardrop punching on 2 inch centers lets beam levels adjust in 2 inch steps. Four levels on a 192 inch frame puts beams roughly 46 inches apart; three levels spreads them to about 62 inches. Frames are finished green and beams orange, the Husky standard.

The beams on an SU29 section are the same Husky step beams used on IU18 and IU24 sections, so the per pair beam capacities in the table are unchanged. The thicker frame is there to carry more total weight in the bay and to resist the column damage that happens when a forklift clips a 16 foot upright. On the decked models each wire deck measures 42 inches deep and is rated 2,600 pounds, with the deck length matched to the bay (46 inch decks on a 48 inch bay, 52 inch decks on a 108 inch bay). A 192 inch frame on a 42 inch base has a height to depth ratio of about 4.6 to 1, under the 6 to 1 point where most manufacturers require row spacers or overhead ties, but placing a pallet on the top beam at roughly 15 feet calls for a reach truck rated for that height with clearance above the top load. Sections are offered in 48, 96, 108, 120 and 144 inch bay widths: a 96 inch bay holds two 40 inch wide pallets, a 108 inch bay holds two 48 inch pallets, a 144 inch bay holds three 40 inch pallets.


Product Lines:
All sections in this category share the Husky SU29420192 frame, so the model number changes only by beam, level count and decking. Read SU29420192-IBN55108-4SW left to right: SU29 marks the 3 by 3 inch 13 gauge welded upright, 420192 is the 42 inch deep by 192 inch high frame, IBN55108 is a 5-1/2 inch tall step beam 108 inches long, 4S means four beam levels in a starter section (3S means three), and a W on the end means wire decking is included. IBX beams are the standard Husky step beam, IBN beams are the heavier 5-1/2 inch profile, and the IBH60144 is a 6 inch beam for the heaviest 144 inch spans.

Per pair beam capacities by bay width: 48 inch bays use the IBX30048 beam rated 7,383 pounds. 96 inch bays use the IBX35096 at 4,044 pounds, the IBX39096 at 5,047 pounds, or the IBX43096 at 6,111 pounds. 108 inch bays use the IBX43108 at 5,000 pounds or the IBN55108 at 8,873 pounds. 120 inch bays use the IBX43120 at 4,062 pounds. 144 inch bays use the IBX43144 at 3,000 pounds, the IBN55144 at 5,569 pounds, or the IBH60144 at 7,820 pounds. Every beam is offered in three or four levels, each with wire decking (SW) or without (S).


Selecting the Right Model:
◆ Choose the SU29 frame when you plan four fully loaded levels of heavy beams, when forklift traffic is heavy at the rack face, or when your engineer or insurer asks for a 13 gauge column. If a 14 gauge IU18 or IU24 frame already carries your total bay load with margin, the lighter frame costs less to ship and install.
◆ Start with the heaviest pallet you will store, double it for a two-pallet bay or triple it for a three-pallet bay, and pick a beam pair rated above that total. The beam rating is per pair and assumes the load is spread evenly across both beams.
◆ Ask for the SU29420192 frame rating at your beam spacing before loading four heavy levels. Frame ratings are published at a stated beam spacing and fall as levels spread apart.
◆ Choose four levels when pallet loads, including the pallet, stand under about 40 inches. Choose three levels for loads up to about 56 inches.
◆ Confirm lift height before buying a 16 foot frame. The truck must place a pallet on the top beam at roughly 15 feet and still clear ceiling and sprinkler heads.
◆ Follow an SU29 starter with SU29 add-ons so every frame in the row has the same column, and add wire decking (the SW models) if cartons, drums or loose items will ever sit on the beams.

Is a 13 gauge pallet rack frame worth it for a 16 foot rack?
For a 192 inch frame carrying four beam levels in a busy forklift aisle, yes in most cases: the SU29 column is 3 by 3 inch tubing in 13 gauge, thicker than the 14 gauge used on Husky IU18 and IU24 frames, so it carries more total bay weight and absorbs forklift contact at the base with less damage. The beams, Bowlock clips and per level beam ratings of 3,000 to 8,873 pounds are the same on all three frames; only the column changes. The CustomMHS pallet racking guide explains why every capacity has a condition attached (guide section 1), how frame rating and beam rating work together (section 2), the difference between roll-formed and structural rack (section 4), the 6 to 1 height to depth rule for tall frames (section 6), anchoring and load plaques (section 7 and section 8), and how to inspect for column damage (section 11).

Where Commonly Used:
Husky SU29 42x192 starter pallet rack sections are used in distribution centers, beverage and paper warehouses, metal stock rooms and building material operations with 18 foot or higher clear ceilings where heavy pallets are stacked four high and forklift traffic at the rack face is constant.

CustomMHS carries the full line of Husky pallet rack, backed by the manufacturer’s warranty.

Frequently Asked Questions (FAQs)

What is a Husky 42x192 starter upright pallet racking unit used for?

A Husky 42x192 starter upright pallet racking unit is designed to provide heavy-duty vertical storage for palletized inventory in warehouse and industrial facilities. It serves as the starting section of a pallet rack row, supplying the upright frames and beam connections needed for safe load support. Starter units can be used on their own or expanded with add-on bays as storage needs grow. They help maximize warehouse capacity while keeping inventory organized and accessible.

How does the 42x192 size support heavy-duty warehouse storage?

The deeper rack depth allows storage of larger pallets and bulk inventory loads, while the tall upright height supports increased vertical storage capacity. This makes it ideal for warehouses, maximizing cube space and handling high-volume goods. The size improves storage density without requiring additional floor space. It delivers strong performance for demanding industrial storage environments.

Why are heavy-duty upright frames critical in pallet racking systems?

Upright frames are the vertical foundation of pallet racking, carrying the full weight of stored pallet loads. Heavy-duty uprights provide durability and stability in busy forklift environments. Strong frames help prevent misalignment, structural damage, and load safety risks over time. Reliable uprights are essential for long-term warehouse storage performance.

What types of facilities benefit from tall starter upright pallet racking?

Tall starter upright racking is commonly used in distribution centers, manufacturing plants, fulfillment warehouses, and bulk storage operations. Any facility storing large quantities of palletized goods benefits from increased vertical storage. These systems reduce floor clutter while improving inventory accessibility and organization. They are especially valuable in high-density warehouse environments.

How does pallet racking improve workflow and warehouse safet

Pallet racking keeps inventory stored in defined vertical locations, making picking and replenishment faster and more efficient. It reduces floor congestion and creates safer aisles for forklifts and warehouse staff. Organized rack systems also support better inventory tracking and load management. This leads to smoother operations with fewer disruptions.

Why buy Husky starter upright pallet racking from CustomMHS.com?

CustomMHS.com helps you select the right Husky starter upright configuration based on your warehouse layout, load requirements, and future expansion goals. Instead of guessing compatibility, you get expert guidance for a safe and efficient racking solution. A properly planned system improves capacity, durability, and long-term warehouse reliability. Buying from CustomMHS.com is the straightforward choice for heavy-duty pallet racking done right.

Is the manufacturer’s warranty included with my purchase?

Yes. All products sold on CustomMHS.com include the original manufacturer’s warranty unless otherwise noted. Custom MHS is an authorized dealer for the brands we carry, which means your purchase is covered by the manufacturer's full factory warranty.

Do you ship nationwide?

Yes. We ship throughout the United States and Canada using trusted freight partners experienced in handling industrial equipment. Our team coordinates shipping details to ensure safe and efficient delivery.