Husky 42x240 Heavy Duty Add-On Pallet Racking Section, IU24 Frame

A Husky 42x240 heavy duty add-on pallet racking section is the bay that extends an existing row of Husky Invincible teardrop pallet rack built on 20 foot IU24 frames: it ships with one IU24420240 heavy duty upright frame measuring 42 inches deep by 240 inches high, three or four pairs of Husky IBX, IBN or IBH step beams, and the Bowlock clips that lock each beam to the frame. An add-on has one frame instead of two because it bolts its beams to the open side of the frame already standing at the end of the row, so each add-on shares a frame with its neighbor. A row of five bays is one starter section plus four add-ons, and every add-on must match the depth, height and column of the starter it joins. At 240 inches this is the tallest frame in the Husky starter and add-on line, and Husky offers it only on the heavy duty IU24 column.
Add-on unit, extends an existing rowUS made high strength steel, ASTM A1011-GR55 Usually ships in 3-4 days
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Unit Type | Dimensions | Beam Cap / Pair | Price 1-9 | View Model |
|
3 Upper Levels, Wire Decking
|
42"D x 240"H x 48"W
|
7,383 lbs.
|
$638.48
|
||
|
3 Upper Levels, No Decking
|
42"D x 240"H x 48"W
|
7,383 lbs.
|
$518.20
|
||
|
4 Upper Levels, Wire Decking
|
42"D x 240"H x 48"W
|
7,383 lbs.
|
$746.30
|
||
|
4 Upper Levels, No Decking
|
42"D x 240"H x 48"W
|
7,383 lbs.
|
$585.39
|
||
|
3 Upper Levels, Wire Decking
|
42"D x 240"H x 96"W
|
4,044 lbs.
|
$884.29
|
||
|
3 Upper Levels, No Decking
|
42"D x 240"H x 96"W
|
4,044 lbs.
|
$645.51
|
||
|
4 Upper Levels, Wire Decking
|
42"D x 240"H x 96"W
|
4,044 lbs.
|
$1,073.51
|
||
|
4 Upper Levels, No Decking
|
42"D x 240"H x 96"W
|
4,044 lbs.
|
$753.41
|
||
|
3 Upper Levels, Wire Decking
|
42"D x 240"H x 96"W
|
5,047 lbs.
|
$903.76
|
||
|
3 Upper Levels, No Decking
|
42"D x 240"H x 96"W
|
5,047 lbs.
|
$663.21
|
||
|
4 Upper Levels, Wire Decking
|
42"D x 240"H x 96"W
|
5,047 lbs.
|
$1,100.03
|
||
|
4 Upper Levels, No Decking
|
42"D x 240"H x 96"W
|
5,047 lbs.
|
$779.96
|
||
|
3 Upper Levels, Wire Decking
|
42"D x 240"H x 96"W
|
6,111 lbs.
|
$916.11
|
||
|
3 Upper Levels, No Decking
|
42"D x 240"H x 96"W
|
6,111 lbs.
|
$675.63
|
||
|
4 Upper Levels, Wire Decking
|
42"D x 240"H x 96"W
|
6,111 lbs.
|
$1,115.95
|
||
|
4 Upper Levels, No Decking
|
42"D x 240"H x 96"W
|
6,111 lbs.
|
$795.90
|
||
|
3 Upper Levels, Wire Decking
|
42"D x 240"H x 108"W
|
5,000 lbs.
|
$978.03
|
||
|
3 Upper Levels, No Decking
|
42"D x 240"H x 108"W
|
5,000 lbs.
|
$710.97
|
||
|
4 Upper Levels, Wire Decking
|
42"D x 240"H x 108"W
|
5,000 lbs.
|
$1,200.87
|
||
|
4 Upper Levels, No Decking
|
42"D x 240"H x 108"W
|
5,000 lbs.
|
$841.83
|
||
|
3 Upper Levels, Wire Decking
|
42"D x 240"H x 108"W
|
8.873 lbs.
|
$1,070.02
|
||
|
3 Upper Levels, No Decking
|
42"D x 240"H x 108"W
|
8.873 lbs.
|
$802.98
|
||
|
4 Upper Levels, Wire Decking
|
42"D x 240"H x 108"W
|
8,873 lbs.
|
$1,322.93
|
||
|
4 Upper Levels, No Decking
|
42"D x 240"H x 108"W
|
8.873 lbs.
|
$963.94
|
||
|
3 Upper Levels, Wire Decking
|
42"D x 240"H x 120"W
|
4,062 lbs.
|
$1,061.14
|
||
|
3 Upper Levels, No Decking
|
42"D x 240"H x 120"W
|
4,062 lbs.
|
$746.30
|
||
|
4 Upper Levels, Wire Decking
|
42"D x 240"H x 120"W
|
4,062 lbs.
|
$1,308.72
|
||
|
4 Upper Levels, No Decking
|
42"D x 240"H x 120"W
|
4,062 lbs.
|
$889.66
|
||
|
3 Upper Levels, Wire Decking
|
42"D x 240"H x 144"W
|
3,000 lbs.
|
$1,169.03
|
||
|
3 Upper Levels, No Decking
|
42"D x 240"H x 144"W
|
3,000 lbs.
|
$808.27
|
||
|
4 Upper Levels, Wire Decking
|
42"D x 240"H x 144"W
|
3,000 lbs.
|
$1,452.06
|
||
|
4 Upper Levels, No Decking
|
42"D x 240"H x 144"W
|
3,000 lbs.
|
$972.73
|
||
|
3 Upper Levels, Wire Decking
|
42"D x 240"H x 144"W
|
5,569 lbs.
|
$1,294.58
|
||
|
3 Upper Levels, No Decking
|
42"D x 240"H x 144"W
|
5,569 lbs.
|
$935.60
|
||
|
4 Upper Levels, Wire Decking
|
42"D x 240"H x 144"W
|
5,569 lbs.
|
$1,620.05
|
||
|
4 Upper Levels, No Decking
|
42"D x 240"H x 144"W
|
5,569 lbs.
|
$1,140.78
|
||
|
3 Upper Levels, Wire Decking
|
42"D x 240"H x 144"W
|
7,820 lbs.
|
$1,441.43
|
||
|
3 Upper Levels, No Decking
|
42"D x 240"H x 144"W
|
7,820 lbs.
|
$1,048.82
|
||
|
4 Upper Levels, Wire Decking
|
42"D x 240"H x 144"W
|
7,820 lbs.
|
$1,828.69
|
||
|
4 Upper Levels, No Decking
|
42"D x 240"H x 144"W
|
7,820 lbs.
|
$1,292.85
|
The IU24420240 upright is Husky’s heavy duty column: 14 gauge roll-formed steel measuring 3 inches by 3 inches with teardrop punching on 2 inch centers, rated 25,390 pounds at 48 inch vertical beam spacing, compared with 18,160 pounds for the 3 by 1-5/8 inch IU18 column used on shorter frames. Four levels on a 240 inch frame puts beams roughly 58 inches apart and three levels about 78 inches apart, both wider than the 48 inch spacing the rating is based on, so the usable frame capacity on this height is lower than the published figure and should be confirmed with Husky for the exact spacing planned. On a shared frame in the middle of a row the total includes half the load from every level on both sides. Frames are finished green and beams orange. Each beam pair is rated separately. The capacities in the table below are per pair of beams, evenly distributed across both beams.
A 240 inch frame on a 42 inch base has a height to depth ratio of about 5.7 to 1, just under the 6 to 1 point where most manufacturers require row spacers tying back to back rows together or overhead ties on single rows, and many engineers call for spacers on any frame over 16 feet regardless. Placing a pallet on the top beam at roughly 19 feet calls for a reach truck rated for that height, and the top load must clear the ceiling and sprinkler heads by the margin the local fire code requires. The 42 inch frame depth is sized for standard 48 inch GMA pallets, which overhang the front and rear beams by three inches on each side by design. Wire decking lays across the two beams of a level to support cartons, drums and odd-sized loads and lets sprinkler water pass through. Add-ons are offered in 48, 96, 108, 120 and 144 inch bay widths so a row can mix widths as long as every bay shares the same frame: a 96 inch bay holds two 40 inch wide pallets, a 108 inch bay holds two 48 inch pallets, a 144 inch bay holds three 40 inch pallets.
Product Lines:
All forty add-ons in this category share the Husky IU24420240 heavy duty frame, so the model number changes only by beam, level count and decking. Read IU24420240-IBN55108-4AW left to right: IU24 marks the heavy duty 3 by 3 inch column, 420240 is the 42 inch deep by 240 inch high frame, IBN55108 is a 5-1/2 inch tall step beam 108 inches long, 4A means four beam levels in an add-on section (3A means three; a starter would read 4S or 3S), and a W on the end means wire decking is included. IBX beams are the standard Husky step beam, IBN beams are the heavier 5-1/2 inch profile, and the IBH60144 is a 6 inch beam for the heaviest 144 inch spans.
Per pair beam capacities by bay width: 48 inch bays use the IBX30048 beam rated 7,383 pounds. 96 inch bays use the IBX35096 at 4,044 pounds, the IBX39096 at 5,047 pounds, or the IBX43096 at 6,111 pounds. 108 inch bays use the IBX43108 at 5,000 pounds or the IBN55108 at 8,873 pounds. 120 inch bays use the IBX43120 at 4,062 pounds. 144 inch bays use the IBX43144 at 3,000 pounds, the IBN55144 at 5,569 pounds, or the IBH60144 at 7,820 pounds. Every beam is offered in three or four levels, each with wire decking (AW) or without (A), which is how ten beams become forty add-ons.
Selecting the Right Model:
◆ Match the add-on to the starter. The frame number before the first hyphen (IU24420240) and the level count (3A or 4A) should both match the starter so beams land at the same heights across the row. There is no IU18 or SU29 version of this height.
◆ Get the frame rating at your actual beam spacing before you buy. Four levels on a 240 inch frame runs about 58 inches between beams and three levels about 78 inches, both wider than the 48 inch spacing behind the 25,390 pound rating.
◆ Count bays, not frames. A row of N bays needs one starter and N minus 1 add-ons. Buying a starter for every bay wastes a frame per bay and adds 3 inches of width each time.
◆ Add up half the loaded levels from both sides of each shared frame and keep the total under the confirmed frame rating. Four levels of IBX43096 beams fully loaded in both bays is about 24,444 pounds on the shared frame, close to the published rating before the spacing reduction, so lighter loads per level are the norm on 20 foot rows.
◆ Plan for row spacers or overhead ties, and confirm reach truck lift height to a 19 foot top beam with sprinkler clearance above the top load.
◆ Choose bay width by pallets per level (a 96 inch bay fits two 40 inch pallets, a 108 inch bay fits two 48 inch pallets, a 144 inch bay fits three 40 inch pallets) and add wire decking (the AW models) if cartons, drums or loose items will ever sit on the beams.
Do I need row spacers when I add bays to a 20 foot pallet rack row?
Most likely yes. A 240 inch Husky IU24420240 frame on a 42 inch base has a height to depth ratio of about 5.7 to 1, just under the 6 to 1 threshold at which the Rack Manufacturers Institute and most manufacturers require back to back rows to be tied together with row spacers or single rows to be braced overhead, and many rack engineers and insurers specify spacers on anything over 16 feet. Adding a bay does not change the ratio, but each new add-on frame needs the same spacers as the frames already in the row so the two rows keep moving as one unit. The add-on ships with one frame rated 25,390 pounds at 48 inch beam spacing, three or four beam pairs rated 3,000 to 8,873 pounds per pair, and Bowlock clips; spacers and anchors are ordered separately. The CustomMHS pallet racking guide explains why every capacity has a condition attached (guide section 1), how frames, beams and bays share load in a row (section 2), the 6 to 1 height to depth rule (section 6), anchoring and load plaques (section 7 and section 8), and why wire decking is rated for distributed loads (section 10).
Where Commonly Used:
Husky IU24 heavy duty 42x240 add-on pallet rack sections are used to extend existing rows of 20 foot Husky rack in high bay distribution centers, third party logistics warehouses and cold storage buildings with 24 foot or higher clear ceilings that store standard 48 inch pallets four high on reach truck or turret truck aisles.
CustomMHS carries the full line of Husky Invincible pallet rack, backed by the manufacturer’s warranty.