Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

Husky 42x240 Heavy Duty Starter Pallet Racking Section, IU24 Frame

Husky 42x240 Starter Pallet Rack Section | IU24 Upright Frame

A Husky 42x240 heavy duty starter pallet racking section is a complete, freestanding bay of Husky Invincible teardrop pallet rack built on two IU24420240 heavy duty upright frames measuring 42 inches deep by 240 inches high, with three or four pairs of Husky IBX, IBN or IBH step beams locked in place by Bowlock clips. At 20 feet this is the tallest frame in the Husky starter line, and Husky offers it only on the heavy duty IU24 column, not the standard IU18. The IU24 column is 14 gauge roll-formed steel measuring 3 inches by 3 inches, rated 25,390 pounds at 48 inch vertical beam spacing, compared with 18,160 pounds for the 3 by 1-5/8 inch IU18 column used on shorter frames.

Starter unit, stand alone unit or to start a rowUS made high strength steel, ASTM A1011-GR55 Usually ships in 3-4 days

Get a Fast Quote →Read our Buying Guide →

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number Unit Type Dimensions Beam Cap / Pair Price 1-9 each, Qty Breaks View Model
3 Upper Levels, Wire Decking
42"D x 240"H x 48"W
7,383 lbs.
$956.80
3 Upper Levels, No Decking
42"D x 240"H x 48"W
7,383 lbs.
$836.56
4 Upper Levels, Wire Decking
42"D x 240"H x 48"W
7,383 lbs.
$1,062.92
4 Upper Levels, No Decking
42"D x 240"H x 48"W
7,383 lbs.
$903.76
3 Upper Levels, Wire Decking
42"D x 240"H x 96"W
4,044 lbs.
$1,202.59
3 Upper Levels, No Decking
42"D x 240"H x 96"W
4,044 lbs.
$962.12
4 Upper Levels, Wire Decking
42"D x 240"H x 96"W
4,044 lbs.
$1,391.85
4 Upper Levels, No Decking
42"D x 240"H x 96"W
4,044 lbs.
$1,071.77
3 Upper Levels, Wire Decking
42"D x 240"H x 96"W
5,047 lbs.
$1,222.10
3 Upper Levels, No Decking
42"D x 240"H x 96"W
5,047 lbs.
$981.52
4 Upper Levels, Wire Decking
42"D x 240"H x 96"W
5,047 lbs.
$1,416.62
4 Upper Levels, No Decking
42"D x 240"H x 96"W
5,047 lbs.
$1,096.58
3 Upper Levels, Wire Decking
42"D x 240"H x 96"W
6,111 lbs.
$1,234.49
3 Upper Levels, No Decking
42"D x 240"H x 96"W
6,111 lbs.
$993.95
4 Upper Levels, Wire Decking
42"D x 240"H x 96"W
6,111 lbs.
$1,434.35
4 Upper Levels, No Decking
42"D x 240"H x 96"W
6,111 lbs.
$1,114.22
3 Upper Levels, Wire Decking
42"D x 240"H x 108"W
5,000 lbs
$1,294.58
3 Upper Levels, No Decking
42"D x 240"H x 108"W
5,000 lbs.
$1,027.56
4 Upper Levels, Wire Decking
42"D x 240"H x 108"W
5,000 lbs.
$1,517.45
4 Upper Levels, No Decking
42"D x 240"H x 108"W
5,000 lbs.
$1,160.21
3 Upper Levels, Wire Decking
42"D x 240"H x 108"W
8.873 lbs.
$1,386.56
3 Upper Levels, No Decking
42"D x 240"H x 108"W
8.873 lbs.
$1,119.53
4 Upper Levels, Wire Decking
42"D x 240"H x 108"W
8.873 lbs.
$1,602.32
4 Upper Levels, No Decking
42"D x 240"H x 108"W
8.873 lbs.
$1,282.24
3 Upper Levels, Wire Decking
42"D x 240"H x 120"W
4,062 lbs.
$1,379.50
3 Upper Levels, No Decking
42"D x 240"H x 120"W
4,062 lbs.
$1,062.92
4 Upper Levels, Wire Decking
42"D x 240"H x 120"W
4,062 lbs.
$1,627.09
4 Upper Levels, No Decking
42"D x 240"H x 120"W
4,062 lbs.
$1,207.98
3 Upper Levels, Wire Decking
42"D x 240"H x 144"W
3,000 lbs.
$1,485.62
3 Upper Levels, No Decking
42"D x 240"H x 144"W
3,000 lbs.
$1,126.58
4 Upper Levels, Wire Decking
42"D x 240"H x 144"W
3,000 lbs.
$1,770.34
4 Upper Levels, No Decking
42"D x 240"H x 144"W
3,000 lbs.
$1,282.24
3 Upper Levels, Wire Decking
42"D x 240"H x 144"W
5,569 lbs.
$1,612.98
3 Upper Levels, No Decking
42"D x 240"H x 144"W
5,569 lbs.
$1,252.17
4 Upper Levels, Wire Decking
42"D x 240"H x 144"W
5,569 lbs.
$1,938.37
4 Upper Levels, No Decking
42"D x 240"H x 144"W
5,569 lbs.
$1,459.03
3 Upper Levels, Wire Decking
42"D x 240"H x 144"W
7,820 lbs.
$1,768.61
3 Upper Levels, No Decking
42"D x 240"H x 144"W
7,820 lbs.
$1,367.12
4 Upper Levels, Wire Decking
42"D x 240"H x 144"W
7,820 lbs.
$2,147.07
4 Upper Levels, No Decking
42"D x 240"H x 144"W
7,820 lbs.
$1,611.19

A starter section is the first bay in a row of pallet rack. It stands on its own, and every bay added after it shares one of its frames, which is why add-on sections ship with one frame instead of two. The 42 inch frame depth is sized for standard 48 inch GMA pallets loaded 42 inches deep so the pallet overhangs the front and rear beams by three inches on each side. Teardrop punching on 2 inch centers lets beam levels adjust in 2 inch steps. Four levels on a 240 inch frame puts beams roughly 58 inches apart and three levels about 78 inches apart, both wider than the 48 inch spacing the frame rating is based on, so the usable frame capacity on this height is lower than the published 25,390 pounds and should be confirmed with Husky for the exact spacing planned. Frames are finished green and beams orange, the Husky Invincible standard.

A 240 inch frame on a 42 inch base has a height to depth ratio of about 5.7 to 1, just under the 6 to 1 point where most manufacturers require row spacers tying back to back rows together or overhead ties on single rows. Placing a pallet on the top beam at roughly 19 feet calls for a reach truck rated for that height, and the top load must clear the ceiling and sprinkler heads by the margin the local fire code requires. The beams on this section are the same Husky step beams used on every other Husky starter, so the per pair beam capacities in the table are unchanged. Wire decking lays across the two beams of a level to support cartons, drums and odd-sized loads and lets sprinkler water pass through. Sections are offered in 48, 96, 108, 120 and 144 inch bay widths: a 96 inch bay holds two 40 inch wide pallets, a 108 inch bay holds two 48 inch pallets, a 144 inch bay holds three 40 inch pallets.


Product Lines:
All forty sections in this category share the Husky IU24420240 heavy duty frame, so the model number changes only by beam, level count and decking. Read IU24420240-IBN55108-4SW left to right: IU24 marks the heavy duty 3 by 3 inch column, 420240 is the 42 inch deep by 240 inch high frame, IBN55108 is a 5-1/2 inch tall step beam 108 inches long, 4S means four beam levels in a starter section (3S means three), and a W on the end means wire decking is included. IBX beams are the standard Husky step beam, IBN beams are the heavier 5-1/2 inch profile, and the IBH60144 is a 6 inch beam for the heaviest 144 inch spans.

Per pair beam capacities by bay width: 48 inch bays use the IBX30048 beam rated 7,383 pounds. 96 inch bays use the IBX35096 at 4,044 pounds, the IBX39096 at 5,047 pounds, or the IBX43096 at 6,111 pounds. 108 inch bays use the IBX43108 at 5,000 pounds or the IBN55108 at 8,873 pounds. 120 inch bays use the IBX43120 at 4,062 pounds. 144 inch bays use the IBX43144 at 3,000 pounds, the IBN55144 at 5,569 pounds, or the IBH60144 at 7,820 pounds. Every beam is offered in three or four levels, each with wire decking (SW) or without (S), which is how ten beams become forty sections.


Selecting the Right Model:
◆ Get the frame rating at your actual beam spacing before you buy. Four levels on a 240 inch frame runs about 58 inches between beams and three levels about 78 inches, both wider than the 48 inch spacing behind the 25,390 pound rating, so the frame will carry less than that figure.
◆ Add up every loaded level and keep the total under the confirmed frame rating. Four levels of IBX43096 beams fully loaded is 24,444 pounds, which is close to the published rating even before the spacing reduction, so on a 20 foot frame lighter loads per level are the norm.
◆ Start with the heaviest pallet you will store, double it for a two-pallet bay or triple it for a three-pallet bay, and pick a beam pair rated above that total. The beam rating is per pair and assumes the load is spread evenly across both beams.
◆ Confirm reach truck lift height and ceiling clearance. The top beam sits at roughly 19 feet, so the truck must place a pallet there and the top load must clear sprinklers by the margin your fire code requires.
◆ Plan for row spacers or overhead ties. At 5.7 to 1 the frame is just under the 6 to 1 height to depth threshold, and many engineers and insurers call for spacers on any frame over 16 feet regardless.
◆ Choose bay width by pallets per level (a 96 inch bay fits two 40 inch pallets, a 108 inch bay fits two 48 inch pallets, a 144 inch bay fits three 40 inch pallets), follow an IU24 starter with IU24 add-ons, and add wire decking (the SW models) if cartons, drums or loose items will ever sit on the beams.

How tall can Husky teardrop pallet rack go, and what changes at 20 feet?
Husky’s tallest standard starter frame is the IU24420240 at 240 inches, or 20 feet, and it comes only on the heavy duty 3 by 3 inch IU24 column rated 25,390 pounds at 48 inch beam spacing. What changes at this height is that the beam spacing needed for three or four levels (about 78 or 58 inches) is wider than the spacing the rating assumes, so the usable frame capacity is lower and must be confirmed with Husky; the height to depth ratio reaches 5.7 to 1, close to the point where row spacers or overhead ties are required; and a reach truck rated for a 19 foot top beam is needed. The beams and their per pair ratings of 3,000 to 8,873 pounds are the same as on shorter Husky frames. The CustomMHS pallet racking guide explains why every capacity has a condition attached (guide section 1), how frame rating and beam rating work together (section 2), the 6 to 1 height to depth rule (section 6), anchoring and load plaques (section 7 and section 8), and why wire decking is rated for distributed loads (section 10).


Where Commonly Used:
Husky IU24 42x240 starter pallet rack sections are used in high bay distribution centers, third party logistics warehouses and cold storage buildings with 24 foot or higher clear ceilings that store standard 48 inch pallets four high on reach truck or turret truck aisles.

CustomMHS carries the full line of Husky Invincible pallet rack, backed by the manufacturer’s warranty.

Frequently Asked Questions (FAQs)

What is a Husky 42x240 starter upright pallet racking unit used for?

A Husky 42x240 starter upright pallet racking unit is designed to provide heavy-duty vertical storage for palletized inventory in warehouse and industrial environments. It serves as the starting section of a pallet rack row, including the upright frames and beam connections needed for safe load support. Starter units can stand alone or expand with add-on bays as storage needs grow. They are essential for organizing bulk inventory while maximizing warehouse capacity.

How does the 42x240 size support high-capacity warehouse storage?

The deeper rack depth allows storage of larger pallets and bulk inventory loads, while the tall upright height provides substantial vertical storage capability. This makes it ideal for warehouses, maximizing cube space and handling high-volume goods. The size improves storage density without expanding floor space. It delivers strong performance for demanding industrial storage operations.

Why are heavy-duty upright frames important for pallet racking safety?

Upright frames are the vertical foundation of pallet racking, supporting the full weight of stored pallet loads. Heavy-duty uprights provide stability and durability in high-traffic forklift environments. Strong frames help prevent misalignment, structural damage, and load safety risks over time. Reliable uprights are essential for long-term warehouse storage performance.

What types of facilities benefit most from tall starter upright pallet racking?

Tall starter upright racking is widely used in distribution centers, manufacturing plants, fulfillment warehouses, and bulk storage operations. Facilities storing large quantities of palletized inventory benefit from increased vertical capacity. These systems reduce floor congestion while improving accessibility and organization. They are especially valuable in high-density warehouse environments.

How does pallet racking improve workflow and warehouse efficiency?

Pallet racking keeps inventory stored in clearly defined vertical locations, making picking and replenishment faster and more consistent. It reduces clutter on warehouse floors and improves aisle safety for forklifts and workers. Organized rack systems also support better inventory control and load management. This leads to smoother operations and fewer disruptions.

Why buy Husky starter pallet racking from CustomMHS.com?

CustomMHS.com helps you choose the correct Husky starter upright configuration based on your load requirements, warehouse layout, and future expansion goals. Instead of guessing compatibility, you get expert support for a safe and efficient racking solution. A properly planned system improves capacity, durability, and long-term reliability. Buying from CustomMHS.com is the straightforward choice for heavy-duty warehouse pallet racking done right.

Is the manufacturer’s warranty included with my purchase?

Yes. All products sold on CustomMHS.com include the original manufacturer’s warranty unless otherwise noted. Custom MHS is an authorized dealer for the brands we carry, which means your purchase is covered by the manufacturer's full factory warranty.

Do you ship nationwide?

Yes. We ship throughout the United States and Canada using trusted freight partners experienced in handling industrial equipment. Our team coordinates shipping details to ensure safe and efficient delivery.