Husky 48x192 Heavy Duty Add-On Pallet Racking Section, IU24 Frame

A Husky 48x192 heavy duty add-on pallet racking section is the bay that extends an existing row of Husky Invincible teardrop pallet rack built on 48 inch deep IU24 frames: it ships with one IU24480192 heavy duty upright frame measuring 48 inches deep by 192 inches high, three or four pairs of Husky IBX, IBN or IBH step beams, and the Bowlock clips that lock each beam to the frame. An add-on has one frame instead of two because it bolts its beams to the open side of the frame already standing at the end of the row, so each add-on shares a frame with its neighbor. A row of five bays is one starter section plus four add-ons, and every add-on must match the depth, height and column of the starter it joins. At 16 feet this is the tallest 48 inch deep frame CustomMHS sells, and it comes only on the heavy duty IU24 column.
Add-on unit, extends an existing rowUS made high strength steel, ASTM A1011-GR55 Usually ships in 3-4 days
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Unit Type | Dimensions | Beam Cap / Pair | Price 1-9 | View Model |
|
3 Upper Levels, Wire Decking
|
48"D x 192"H x 48"W
|
7,383 lbs.
|
$608.39
|
||
|
3 Upper Levels, No Decking
|
48"D x 192"H x 48"W
|
7,383 lbs.
|
$465.10
|
||
|
4 Upper Levels, Wire Decking
|
48"D x 192"H x 48"W
|
7,383 lbs.
|
$725.07
|
||
|
4 Upper Levels, No Decking
|
48"D x 192"H x 48"W
|
7,383 lbs.
|
$534.09
|
||
|
3 Upper Levels, Wire Decking
|
48"D x 192"H x 96"W
|
4,044 lbs.
|
$878.96
|
||
|
3 Upper Levels, No Decking
|
48"D x 192"H x 96"W
|
4,044 lbs.
|
$592.44
|
||
|
4 Upper Levels, Wire Decking
|
48"D x 192"H x 96"W
|
4,044 lbs.
|
$1,084.17
|
||
|
4 Upper Levels, No Decking
|
48"D x 144"H x 96"W
|
4,044 lbs.
|
$703.90
|
||
|
3 Upper Levels, Wire Decking
|
48"D x 192"H x 96"W
|
5,047 lbs.
|
$886.04
|
||
|
3 Upper Levels, No Decking
|
48"D x 192"H x 96"W
|
5,047 lbs.
|
$599.52
|
||
|
4 Upper Levels, Wire Decking
|
48"D x 192"H x 96"W
|
5,047 lbs.
|
$1,093.01
|
||
|
4 Upper Levels, No Decking
|
48"D x 192"H x 96"W
|
5,047 lbs.
|
$712.75
|
||
|
3 Upper Levels, Wire Decking
|
48"D x 192"H x 96"W
|
6,111 lbs.
|
$900.19
|
||
|
3 Upper Levels, No Decking
|
48"D x 192"H x 96"W
|
6,111 lbs.
|
$613.69
|
||
|
4 Upper Levels, Wire Decking
|
48"D x 192"H x 96"W
|
6,111 lbs.
|
$1,114.22
|
||
|
4 Upper Levels, No Decking
|
48"D x 192"H x 96"W
|
6,111 lbs.
|
$733.97
|
||
|
3 Upper Levels, Wire Decking
|
48"D x 192"H x 108"W
|
5,000 lbs.
|
$963.94
|
||
|
3 Upper Levels, No Decking
|
48"D x 192"H x 108"W
|
5,000 lbs.
|
$650.80
|
||
|
4 Upper Levels, Wire Decking
|
48"D x 192"H x 108"W
|
5,000 lbs.
|
$1,176.13
|
||
|
4 Upper Levels, No Decking
|
48"D x 192"H x 108"W
|
5,000 lbs.
|
$758.75
|
||
|
3 Upper Levels, Wire Decking
|
48"D x 192"H x 108"W
|
8,873 lbs.
|
$1,043.46
|
||
|
3 Upper Levels, No Decking
|
48"D x 192"H x 108"W
|
8,873 lbs.
|
$732.15
|
||
|
4 Upper Levels, Wire Decking
|
48"D x 192"H x 108"W
|
8,873 lbs.
|
$1,305.20
|
||
|
4 Upper Levels, No Decking
|
48"D x 192"H x 108"W
|
8,873 lbs.
|
$889.66
|
||
|
3 Upper Levels, Wire Decking
|
48"D x 192"H x 120"W
|
4,062 lbs.
|
$1,045.20
|
||
|
3 Upper Levels, No Decking
|
48"D x 192"H x 120"W
|
4,062 lbs.
|
$680.94
|
||
|
4 Upper Levels, Wire Decking
|
48"D x 192"H x 120"W
|
4,062 lbs.
|
$1,305.20
|
||
|
4 Upper Levels, No Decking
|
48"D x 192"H x 120"W
|
4,062 lbs.
|
$820.59
|
||
|
3 Upper Levels, Wire Decking
|
48"D x 192"H x 144"W
|
3,000 lbs.
|
$1,177.86
|
||
|
3 Upper Levels, No Decking
|
48"D x 192"H x 144"W
|
3,000 lbs.
|
$748.07
|
||
|
4 Upper Levels, Wire Decking
|
48"D x 192"H x 144"W
|
3,000 lbs.
|
$1,483.82
|
||
|
4 Upper Levels, No Decking
|
48"D x 192"H x 144"W
|
3,000 lbs.
|
$910.82
|
||
|
3 Upper Levels, Wire Decking
|
48"D x 192"H x 144"W
|
5,569 lbs.
|
$1,292.85
|
||
|
3 Upper Levels, No Decking
|
48"D x 192"H x 144"W
|
5,569 lbs.
|
$863.09
|
||
|
4 Upper Levels, Wire Decking
|
48"D x 192"H x 144"W
|
5,569 lbs.
|
$1,634.18
|
||
|
4 Upper Levels, No Decking
|
48"D x 192"H x 144"W
|
5,569 lbs.
|
$1,062.92
|
||
|
3 Upper Levels, Wire Decking
|
48"D x 192"H x 144"W
|
7,820 lbs.
|
$1,402.47
|
||
|
3 Upper Levels, No Decking
|
48"D x 192"H x 144"W
|
7,820 lbs.
|
$974.46
|
||
|
4 Upper Levels, Wire Decking
|
48"D x 192"H x 144"W
|
7,820 lbs.
|
$1,782.78
|
||
|
4 Upper Levels, No Decking
|
48"D x 192"H x 144"W
|
7,820 lbs.
|
$1,209.66
|
The IU24480192 upright is Husky’s heavy duty column: 14 gauge roll-formed steel measuring 3 inches by 3 inches with teardrop punching on 2 inch centers, rated 25,390 pounds at 48 inch vertical beam spacing, compared with 18,160 pounds for the 3 by 1-5/8 inch IU18 column used on the shorter 48 inch deep frames. Four levels on a 192 inch frame puts beams roughly 46 inches apart, close to the rating spacing; three levels spreads them to about 62 inches, where the frame carries less than the published figure. On a shared frame in the middle of a row the total includes half the load from every level on both sides, which on a 16 foot frame with three or four loaded levels is where the extra IU24 capacity matters. Footplates measure 4 inches by 4-1/4 inches and anchor to the floor. Frames are finished green and beams orange. Each beam pair is rated separately. The capacities in the table below are per pair of beams, evenly distributed across both beams.
The 48 inch frame depth is the choice for pallets deeper than the standard 48 inch GMA footprint, for 48 inch pallets that must sit fully supported with no overhang, and for drums, crates and long cartons that need the full beam to beam depth under them. A 192 inch frame on a 48 inch base has a height to depth ratio of 4 to 1, well under the 6 to 1 point where row spacers or overhead ties are required, and placing a pallet on the top beam at roughly 15 feet calls for a reach truck rated for that height. Wire decking lays across the two beams of a level to support cartons, drums and odd-sized loads and lets sprinkler water pass through; on a 48 inch deep frame the decks are 48 inches deep to match. Add-ons are offered in 48, 96, 108, 120 and 144 inch bay widths so a row can mix widths as long as every bay shares the same frame: a 96 inch bay holds two 40 inch wide pallets, a 108 inch bay holds two 48 inch pallets, a 144 inch bay holds three 40 inch pallets.
Product Lines:
All forty add-ons in this category share the Husky IU24480192 heavy duty frame, so the model number changes only by beam, level count and decking. Read IU24480192-IBN55108-4AW left to right: IU24 marks the heavy duty 3 by 3 inch column, 480192 is the 48 inch deep by 192 inch high frame, IBN55108 is a 5-1/2 inch tall step beam 108 inches long, 4A means four beam levels in an add-on section (3A means three; a starter would read 4S or 3S), and a W on the end means wire decking is included. IBX beams are the standard Husky step beam, IBN beams are the heavier 5-1/2 inch profile, and the IBH60144 is a 6 inch beam for the heaviest 144 inch spans.
Per pair beam capacities by bay width: 48 inch bays use the IBX30048 beam rated 7,383 pounds. 96 inch bays use the IBX35096 at 4,044 pounds, the IBX39096 at 5,047 pounds, or the IBX43096 at 6,111 pounds. 108 inch bays use the IBX43108 at 5,000 pounds or the IBN55108 at 8,873 pounds. 120 inch bays use the IBX43120 at 4,062 pounds. 144 inch bays use the IBX43144 at 3,000 pounds, the IBN55144 at 5,569 pounds, or the IBH60144 at 7,820 pounds. Every beam is offered in three or four levels, each with wire decking (AW) or without (A), which is how ten beams become forty add-ons.
Selecting the Right Model:
◆ Match the add-on to the starter. The frame number before the first hyphen (IU24480192) and the level count (3A or 4A) should both match the starter so beams land at the same heights across the row. A 48 inch deep add-on will not join a 42 inch deep row, and this height has no IU18 version.
◆ Count bays, not frames. A row of N bays needs one starter and N minus 1 add-ons. Buying a starter for every bay wastes a frame per bay and adds 3 inches of width each time.
◆ Use the 25,390 pound frame rating as the ceiling for the combined load on each shared frame, counting half of every loaded level on both sides. Four levels of 6,111 pound IBX43096 beams fully loaded in both bays puts about 24,444 pounds on the shared frame, inside the IU24 rating at 48 inch spacing.
◆ Start with the heaviest pallet you will store, double it for a two-pallet bay or triple it for a three-pallet bay, and pick a beam pair rated above that total. The beam rating is per pair and assumes the load is spread evenly across both beams.
◆ Choose four levels when pallet loads, including the pallet, stand under about 40 inches. Choose three levels for loads up to about 56 inches, and confirm the frame rating at that wider spacing. Confirm reach truck lift height to a 15 foot top beam.
◆ Add wire decking (the AW models) if you will ever place cartons, drums or loose items on the rack, or if your fire code or insurer asks for open decking under sprinklers. Wire decking does not raise the beam capacity.
Why does the 48x192 add-on cost more per bay than a shorter add-on with the same beams?
Because the frame is the part that changes: a Husky IU24480192 add-on carries one 16 foot, 48 inch deep frame on the heavy duty 3 by 3 inch column, which uses roughly twice the steel of an 8 foot IU18 frame, and it ships with three or four beam pairs instead of two. The beams themselves (IBX, IBN and IBH step beams rated 3,000 to 8,873 pounds per pair) are the same parts used on every Husky section, so the beam cost per level does not change. What the shopper gets for the taller frame is 8 to 10 pallet positions per 96 inch bay instead of 4 to 6, on a frame rated 25,390 pounds at 48 inch beam spacing instead of 18,160. The CustomMHS pallet racking guide explains why every capacity has a condition attached (guide section 1), how frames, beams and bays share load in a row (section 2), the 6 to 1 height to depth rule for tall frames (section 6), anchoring and load plaques (section 7 and section 8), and why wire decking is rated for distributed loads (section 10).
Where Commonly Used:
Husky IU24 heavy duty 48x192 add-on pallet rack sections are used to extend existing rows of Husky 48 inch deep, 192 inch high rack in distribution centers, manufacturing plants and third party logistics warehouses with 18 foot or higher clear ceilings that store oversized pallets, drums, crates or long cartons four high on reach truck aisles.
CustomMHS carries the full line of Husky Invincible pallet rack, backed by the manufacturer’s warranty.