Husky 48x96 Starter Pallet Racking Section, IU18 Frame

A Husky 48x96 starter pallet racking section is a complete, freestanding bay of Husky Invincible teardrop pallet rack built on two IU18480096 upright frames measuring 48 inches deep by 96 inches high, with two or three pairs of Husky IBX, IBN or IBH step beams locked in place by Bowlock clips. A starter section is the first bay in a row of pallet rack. It stands on its own, and every bay added after it shares one of its frames, which is why add-on sections ship with one frame instead of two. The 48 inch frame depth is the choice for pallets deeper than the standard 48 inch GMA footprint, for 48 inch pallets that must sit fully supported with no overhang, and for loads such as drums, crates and long cartons that need the full beam to beam depth under them.
Starter unit, stand alone unit or to start a rowUS made high strength steel, ASTM A1011-GR55 Usually ships in 3-4 days
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Unit Type | Dimensions | Beam Cap / Pair | Price 1-9 each, Qty Breaks | View Model |
|
2 Upper Levels, Wire Decking
|
48"D x 96"H x 48"W
|
7,383 lbs.
|
$486.32
|
||
|
2 Upper Levels, No Decking
|
48"D x 96"H x 48"W
|
7,383 lbs.
|
$390.82
|
||
|
3 Upper Levels, Wire Decking
|
48"D x 96"H x 48"W
|
7,383 lbs.
|
$601.33
|
||
|
3 Upper Levels, No Decking
|
48"D x 96"H x 48"W
|
7,383 lbs.
|
$458.04
|
||
|
2 Upper Levels, Wire Decking
|
48"D x 96"H x 96"W
|
4,044 lbs.
|
$666.76
|
||
|
2 Upper Levels, No Decking
|
48"D x 96"H x 96"W
|
4,044 lbs.
|
$475.77
|
||
|
3 Upper Levels, Wire Decking
|
48"D x 96"H x 96"W
|
4,044 lbs.
|
$935.60
|
||
|
3 Upper Levels, No Decking
|
48"D x 96"H x 96"W
|
4,044 lbs.
|
$585.39
|
||
|
2 Upper Levels, Wire Deckin
|
48"D x 96"H x 96"W
|
5,047 lbs.
|
$670.27
|
||
|
2 Upper Levels, No Decking
|
48"D x 96"H x 96"W
|
5,047 lbs.
|
$479.27
|
||
|
3 Upper Levels, Wire Decking
|
48"D x 96"H x 96"W
|
5,047 lbs.
|
$831.19
|
||
|
3 Upper Levels, No Decking
|
48"D x 96"H x 96"W
|
5,047 lbs.
|
$592.44
|
||
|
2 Upper Levels, Wire Decking
|
48"D x 96"H x 96"W
|
6,111 lbs.
|
$680.94
|
||
|
2 Upper Levels, No Decking
|
48"D x 96"H x 96"W
|
6,111 lbs.
|
$491.64
|
||
|
3 Upper Levels, Wire Decking
|
48"D x 96"H x 96"W
|
6,111 lbs.
|
$845.41
|
||
|
3 Upper Levels, No Decking
|
48"D x 96"H x 96"W
|
6,111 lbs.
|
$608.39
|
||
|
2 Upper Levels, Wire Decking
|
48"D x 96"H x 108"W
|
5,000 lbs.
|
$723.32
|
||
|
2 Upper Levels, No Decking
|
48"D x 96"H x 108"W
|
5,000 lbs.
|
$514.65
|
||
|
3 Upper Levels, Wire Decking
|
48"D x 96"H x 108"W
|
5,000 lbs.
|
$882.50
|
||
|
3 Upper Levels, No Decking
|
48"D x 96"H x 108"W
|
5,000 lbs.
|
$645.51
|
||
|
2 Upper Levels, Wire Decking
|
48"D x 96"H x 108"W
|
8,873 lbs.
|
$776.39
|
||
|
2 Upper Levels, No Decking
|
48"D x 96"H x 108"W
|
8,873 lbs.
|
$569.45
|
||
|
3 Upper Levels, Wire Decking
|
48"D x 96"H x 108"W
|
8,873 lbs.
|
$1,036.44
|
||
|
3 Upper Levels, No Decking
|
48"D x 96"H x 108"W
|
8,873 lbs.
|
$725.07
|
||
|
2 Upper Levels, Wire Decking
|
48"D x 96"H x 120"W
|
4,062 lbs.
|
$776.39
|
||
|
2 Upper Levels, No Decking
|
48"D x 96"H x 120"W
|
4,062 lbs.
|
$534.09
|
||
|
3 Upper Levels, Wire Decking
|
48"D x 96"H x 120"W
|
4,062 lbs.
|
$1,038.16
|
||
|
3 Upper Levels, No Decking
|
48"D x 96"H x 120"W
|
4,062 lbs.
|
$675.63
|
||
|
2 Upper Levels, Wire Decking
|
48"D x 96"H x 144"W
|
3,000 lbs
|
$818.86
|
||
|
2 Upper Levels, No Decking
|
48"D x 96"H x 144"W
|
3,000 lbs.
|
$580.09
|
||
|
3 Upper Levels, Wire Decking
|
48"D x 96"H x 144"W
|
3,000 lbs.
|
$1,170.80
|
||
|
3 Upper Levels, No Decking
|
48"D x 96"H x 144"W
|
3,000 lbs.
|
$742.80
|
||
|
2 Upper Levels, Wire Decking
|
48"D x 96"H x 144"W
|
5,569 lbs
|
$893.12
|
||
|
2 Upper Levels, No Decking
|
48"D x 96"H x 144"W
|
5,569 lbs.
|
$656.16
|
||
|
3 Upper Levels, Wire Decking
|
48"D x 96"H x 144"W
|
5,569 lbs.
|
$1,285.75
|
||
|
3 Upper Levels, No Decking
|
48"D x 96"H x 144"W
|
5,569 lbs.
|
$857.76
|
||
|
2 Upper Levels, Wire Decking
|
48"D x 96"H x 144"W
|
7,820 lbs.
|
$967.38
|
||
|
2 Upper Levels, No Decking
|
48"D x 96"H x 144"W
|
7,820 lbs.
|
$728.67
|
||
|
3 Upper Levels, Wire Decking
|
48"D x 96"H x 144"W
|
7,820 lbs.
|
$1,397.18
|
||
|
3 Upper Levels, No Decking
|
48"D x 96"H x 144"W
|
7,820 lbs.
|
$967.38
|
The IU18480096 upright uses the standard Husky Invincible column: 14 gauge roll-formed steel measuring 3 inches by 1-5/8 inches with teardrop punching on 2 inch centers, so beam levels adjust in 2 inch steps. Husky rates the frame at 18,160 pounds at 48 inch vertical beam spacing, the same rating as the 42 inch deep IU18 frames because the column is the same; the extra depth changes what fits on the beams, not what the column carries. Frames are finished green and beams orange, the Husky Invincible standard. Each beam pair is rated separately, and the beam rating, not the frame rating, is normally what limits how much goes on a single level. The capacities in the table below are per pair of beams, evenly distributed across both beams.
The 96 inch frame is the shortest in the Husky 48 inch deep line and is offered with two or three beam levels. Three levels on an 8 foot frame puts beams roughly 30 inches apart, which suits short loads such as case goods, totes and drums on their sides; two levels suits full height pallets. Wire decking lays across the two beams of a level to support cartons, drums and odd-sized loads that would otherwise sit on open beams, and it lets sprinkler water pass through. On a 48 inch deep frame the decks are 48 inches deep to match. Sections are offered in 48, 96, 108, 120 and 144 inch bay widths: a 96 inch bay holds two 40 inch wide pallets, a 108 inch bay holds two 48 inch pallets, a 144 inch bay holds three 40 inch pallets.
Product Lines:
All forty sections in this category share the Husky IU18480096 frame, so the model number changes only by beam, level count and decking. Read IU18480096-IBX43096-3SW left to right: IU18 marks the 3 by 1-5/8 inch column, 480096 is the 48 inch deep by 96 inch high frame, IBX43096 is a 4-3/8 inch tall step beam 96 inches long, 3S means three beam levels in a starter section (2S means two), and a W on the end means wire decking is included. IBX beams are the standard Husky step beam, IBN beams are the heavier 5-1/2 inch profile, and the IBH60144 is a 6 inch beam for the heaviest 144 inch spans.
Per pair beam capacities by bay width: 48 inch bays use the IBX30048 beam rated 7,383 pounds. 96 inch bays use the IBX35096 at 4,044 pounds, the IBX39096 at 5,047 pounds, or the IBX43096 at 6,111 pounds. 108 inch bays use the IBX43108 at 5,000 pounds or the IBN55108 at 8,873 pounds. 120 inch bays use the IBX43120 at 4,062 pounds. 144 inch bays use the IBX43144 at 3,000 pounds, the IBN55144 at 5,569 pounds, or the IBH60144 at 7,820 pounds. Every beam is offered in two or three levels, each with wire decking (SW) or without (S), which is how ten beams become forty sections.
Selecting the Right Model:
◆ Choose 48 inch deep frames over 42 inch when your pallets are deeper than 48 inches, when loads must not overhang the beams, or when you store drums, crates or cartons that need support across the full depth. For standard 48 inch GMA pallets a 42 inch frame is the usual choice because the 3 inch overhang front and back is by design.
◆ Start with the heaviest pallet you will store, double it for a two-pallet bay or triple it for a three-pallet bay, and pick a beam pair rated above that total. The beam rating is per pair and assumes the load is spread evenly across both beams.
◆ Add up every loaded level and keep the total under the 18,160 pound frame rating. Three levels of IBN55108 beams fully loaded is 26,619 pounds, more than the frame carries, so heavy beams and three levels do not always go together.
◆ Choose two levels for full height pallets and three levels for loads under about 26 inches tall such as case goods, totes or drums on their sides.
◆ Choose bay width by pallets per level. A 96 inch bay fits two 40 inch pallets, a 108 inch bay fits two 48 inch pallets, and a 144 inch bay fits three 40 inch pallets, each with about 4 inches of clearance.
◆ Add wire decking (the SW models) if you will ever place cartons, drums or loose items on the rack, or if your fire code or insurer asks for open decking under sprinklers. Wire decking does not raise the beam capacity. Plan the row before you buy: one starter plus add-ons builds a continuous row.
Should I buy 42 inch or 48 inch deep pallet rack?
Buy 48 inch deep Husky frames when your pallets or loads are deeper than 48 inches, when nothing may overhang the beams, or when you store drums, crates and cartons that need support across the full depth; buy 42 inch deep frames for standard 48 inch GMA pallets, which are designed to overhang 3 inches front and back. The IU18480096 frame is rated 18,160 pounds at 48 inch beam spacing, the same as the 42 inch deep IU18 frame, and takes the same beams with per pair ratings of 3,000 to 8,873 pounds, so the extra depth changes what fits, not what the rack carries. The CustomMHS pallet racking guide explains why every capacity has a condition attached (guide section 1), how frames, beams and bays work together (section 2), how frame depth is matched to pallet depth (section 6), anchoring and load plaques (section 7 and section 8), and why wire decking is rated for distributed loads (section 10).
Where Commonly Used:
Husky 48x96 starter pallet rack sections are used in warehouses, manufacturing plants and distribution centers that store oversized pallets, drums, crates or long cartons on forklift-accessible beam levels under 10 foot ceilings or mezzanines.
CustomMHS carries the full line of Husky Invincible pallet rack, backed by the manufacturer’s warranty.