Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

Lift Products Guardian Series U-Lift Low Profile Scissor Lift Tables

floor level lift

The Lift Products Guardian Series U-Lift is a low profile electric hydraulic scissor lift table with a U shaped platform. A 21" wide manual or electric pallet truck drives into the open center of the U, sets the pallet down on the two platform rails and backs out, so no loading ramp is needed. Lift Products says this suits wire baskets, containers and open bottom plastic or wooden pallets, where the forks must pass through the center of the platform.

 

Get a Fast Quote →Read our Buying Guide → 

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.

Model Number Platform Size Travel Capacity Price View Model
44-7/8" wide x 56" long
3-1/8" to 33-7/8"
2,200 pounds
$5,933.15
45-5/8" wide x 59-7/8" long
3-5/8" to 33-1/8"
3,300 pounds
$7,538.89

The LPBLU-20 (2,200 lb) lowers to 3-1/8" and the LPBLU-30 (3,300 lb) lowers to 3-5/8". Both are well under the seven inches the CustomMHS lift table guide gives as the limit for pallet jack loading, and Lift Products says the low profile design removes the need for a loading ramp or a floor pit.

The U-Lift carries the Guardian safety features. A safety perimeter around the platform stops the descent on contact, with a reset button in the 24 V control box. A check valve stops the table from lowering if a hose bursts, a relief valve protects against overloading, a compensated flow valve controls lowering speed, an upper limit switch stops travel at the top, and there is clearance between the scissors to prevent trapping. Mechanical blocks are built in for maintenance, and the pivot points use self-lubricating bushings. The external power pack comes with 8 ft hoses and runs on 115 V single phase as standard, with 230/460 V three phase available. Options are foot controls and a stainless galvanized version. Lift Products states the series meets and exceeds both U.S. (ANSI) and EU safety standards.

Product Lines
The U-Lift comes in two models. The LPBLU-20 is rated 2,200 lb, lowers to 3-1/8" and raises to 33-7/8" on a 56" long platform with 30-3/4" of travel. The LPBLU-30 is rated 3,300 lb, lowers to 3-5/8" and has a 45-5/8" x 59-7/8" platform with 29-1/2" of travel. Both are built for a 21" wide pallet jack.

Selecting the Right Model
◆ LPBLU-20 (2,200 lb): 56" long U platform, 3-1/8" lowered, 33-7/8" raised, 42" x 52" base frame, 18 second lift.
◆ LPBLU-30 (3,300 lb): 45-5/8" x 59-7/8" U platform, 3-5/8" lowered, 43" x 56-1/4" base frame, 25 second lift.
◆ Pallet jack: Both models are designed for a 21" wide manual or electric pallet truck.


Can a pallet jack load a U-Lift table without a ramp?

Yes. A 21" wide pallet jack drives into the open center of the U, and both models lower to less than four inches, far under the seven inch limit for pallet jack loading.
See how lowered height controls loading in the CustomMHS lift table guide.

Where Commonly Used
U-Lift tables are commonly used where wire baskets, open bottom containers and pallets are brought in by pallet jack and raised to working height for loading, unloading or de-palletizing.

CustomMHS carries the full line of Lift Products Guardian Series U-Lift low profile scissor lift tables, backed by the manufacturer’s warranty.

Frequently Asked Questions (FAQs)


What are Lift Products’ Low Profile Guardian Series U-Lift Tables used for?

Lift Products Low Profile Guardian Series U-Lift Tables are designed to lift pallet loads from floor level, providing easy access for a pallet jack. The open-center U-shape allows pallets to be loaded directly onto the platform without ramps or pits. These tables are commonly used in warehouses, shipping areas, and manufacturing facilities. They improve material-handling efficiency while supporting safer lifting practices.

How does an open-center U-lift table improve pallet access?

The U-shaped platform design allows pallet jacks to enter and exit the lift table smoothly. This eliminates the need for additional loading equipment or elevated ramps. Operators can quickly position pallets, saving time in busy work environments. Open-center pallet lifting is ideal for operations focused on speed and convenience.

What makes the Guardian Series U-Lift different from standard lift tables?

Unlike traditional flat-platform lift tables, U-lift tables are specifically built for pallet jack compatibility. The low-profile design keeps the platform close to the floor when lowered, improving accessibility. These tables are also engineered for durability and stable lifting in demanding industrial settings. This makes them a practical, space-saving solution for pallet-handling applications.

What applications benefit most from low-profile U-lift tables?

Low-profile U-lift tables are ideal for pallet loading stations, packaging lines, assembly areas, and shipping docks. They are especially useful when pallets must be lifted frequently without slowing the workflow. These lift tables support ergonomic positioning for tasks that require repeated access to pallet loads. They provide an efficient solution for high-volume material handling.

How do U-lift tables improve workplace ergonomics and safety?

By lifting pallets to a comfortable working height, these tables reduce bending, reaching, and manual lifting strain. This helps reduce the risk of back injuries and repetitive strain injuries. Stable load positioning improves operator control and reduces handling accidents. Ergonomic pallet-lifting solutions contribute to safer, more productive workspaces.

Why purchase Guardian Series U-Lift Tables from CustomMHS.com?

CustomMHS.com provides trusted access to Lift Products Guardian Series solutions for safe, efficient pallet handling. Purchasing through CustomMHS.com provides expert guidance to ensure you select the right U-lift table for your operation. These lift tables are a long-term investment in productivity and worker safety. CustomMHS.com delivers dependable products backed by knowledgeable service and support.

Is the manufacturer’s warranty included with my purchase?

Yes. All products sold on CustomMHS.com include the original manufacturer’s warranty unless otherwise noted. Custom MHS is an authorized dealer for the brands we carry, which means your purchase is covered by the manufacturer's full factory warranty.

Do you ship nationwide?

Yes. We ship throughout the United States and Canada using trusted freight partners experienced in handling industrial equipment. Our team coordinates shipping details to ensure safe and efficient delivery.