Presto Lifts Double Scissor Lift Tables

The Presto Lifts DXS Series uses a double scissor mechanism to get more vertical travel from a compact footprint. Presto describes the DXS lifts as industrial duty tables with a smaller footprint than standard lifts, and its catalog lists travel groups from 30 up to 72 in. The CustomMHS table lists 13 models from 500 to 4,000 lb, with lowered heights of 6 to 14 in. and raised heights from 36¾ to 86 in.
Hydraulic cylindersErgonomical designUp to 4,000 pounds capacity
Get a Fast Quote →Read our Buying Guide →
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Platform Size | Travel | Capacity | Price | View Model |
|
16" wide x 24" long
|
6-3/4" to 36-3/4"
|
500 pounds
|
$6,022.50
|
||
|
16" wide x 24" long
|
6-3/4" to 36-3/4"
|
1,000 pounds
|
$7,310.14
|
||
|
24" wide x 36" long
|
7-1/2" to 42-1/2"
|
1,000 pounds
|
$7,702.46
|
||
|
24" wide x 36" long
|
7-1/2" to 42-1/2"
|
1,500 pounds
|
$7,986.13
|
||
|
18" wide x 42" long
|
6" to 44-1/4"
|
2,000 pounds
|
$8,379.61
|
||
|
24" wide x 48" long
|
7-1/2" to 55-1/2"
|
1,000 pounds
|
$8,423.08
|
||
|
24" wide x 48" long
|
7-1/2" to 55-1/2"
|
1,500 pounds
|
$8,837.14
|
||
|
24" wide x 40" long
|
9-1/2" to 57-1/2"
|
2,000 pounds
|
$16,366.89
|
||
|
30" wide x 42" long
|
12" to 60"
|
4,000 pounds
|
$20,862.08
|
||
|
24" wide x 53" long
|
12-1/2" to 76-1/2"
|
2,000 pounds
|
$19,749.14
|
||
|
30" wide x 53" long
|
14" to 74"
|
4,000 pounds
|
$25,313.82
|
||
|
24" wide x 53" long
|
12-1/2" to 84-1/2"
|
2,000 pounds
|
$20,927.28
|
||
|
32" wide x 57" long
|
14" to 86"
|
4,000 pounds
|
$26,972.36
|
The standard features are a hand control pendant (a foot control is available), heavy-duty hydraulic cylinders with chrome-plated rams, polyurethane cylinder seals, and lifetime lubricated bearings on every roller and pivot point. A hinged platform gives access to the cylinders and power unit with the table collapsed. The DXS30 powers up and down, and every other DXS model powers up and lowers by gravity. Motor size and voltage vary by model, from ⅓ hp on 115 V up to 3 hp on 230/460 V three phase for the larger models.
Selecting a model starts with the raised height you need, which sets the travel group, and then the capacity that covers your heaviest load. Platforms are small on these tables, so confirm that the load fits. Larger platforms are available, with side and end capacity derated for the extra size.
Product Lines
The DXS Series has five travel groups. The DXS30 has a 16 x 24 in. platform in 500 and 1,000 lb, lowered 6¾ in. and raised to 36¾ in. The DXS36 has a 24 x 36 in. platform in 1,000 and 1,500 lb, lowered 7½ in. and raised to 43½ in., plus an 18 x 42 in. platform in 2,000 lb, lowered 6 in. and raised to 44¼ in. The DXS48 has a 24 x 48 in. platform in 1,000 and 1,500 lb, lowered 7½ in. and raised to 55½ in., a 24 x 40 in. platform in 2,000 lb at 9½ to 57½ in., and a 30 x 42 in. platform in 4,000 lb at 12 to 60 in. The DXS60 has a 24 x 53 in. platform in 2,000 lb, lowered 12½ in. and raised to 72½ in., and a 30 x 53 in. platform in 4,000 lb at 14 to 74 in. The DXS72 has a 2,000 lb model at 12½ to 84½ in. and a 32 x 57 in. platform in 4,000 lb at 14 to 86 in.
Selecting the Right Model
◆ Choose the travel group from the raised height you need: about 37 in. for the DXS30, 43 to 44 in. for the DXS36, 55 to 60 in. for the DXS48, 72 to 74 in. for the DXS60, and 84 to 86 in. for the DXS72.
◆ Rate capacity to your heaviest load, including fixtures and pallets. The 4,000 lb models start in the DXS48 group.
◆ Check the platform against the load. Standard platforms run from 16 x 24 in. to 32 x 57 in., and Presto lists larger platforms up to 54 x 72 in. on the DXS72.
◆ Remember that oversized platforms derate side and end capacity by 2% for every inch of increase, and oversized models must be lagged to the floor.
◆ Check the lowered height, which runs from 6 in. on the DXS36 2,000 lb model up to 14 in. on the 4,000 lb DXS60 and DXS72 models, and plan the loading method around it.
◆ Ask about options. Presto lists casters, push-button controls, special platforms, bellows skirts, limit switches, and pit mounting.
Will a pallet jack be able to load the table at its lowered height?
The Lift Table Buying Guide explains why lowered height comes first and what a table that will not go below seven inches means for loading.
Where Commonly Used
Commonly used for elevated conveyor and line feeds, tall assembly work, and raising heavy loads to upper level transfer points.
CustomMHS carries the full line of Presto Lifts DXS double scissor lift tables, backed by the manufacturer’s warranty.