Lift Products Guardian Series Scissor Lift Tables

The Lift Products Guardian Series (LPB) is a hydraulic scissor lift table rated for 1,100 lb, in five models with platforms from 31.5 x 39.38 in. up to 39.37 x 59 in. The tables lower to 7.87 in. (8.62 in. on the two tallest models) and raise to 31, 39.37 or 48 in. Controls are 24V low-tension with up, down and reset buttons, and an internal power pack with an overload relief valve and a compensated flow valve controls lowering.
Hydraulic cylindersErgonomical designUp to 1,100 pounds capacity
Get a Fast Quote →Read our Buying Guide →
Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Platform Size | Travel | Capacity | Price | View Model |
|
31.5" wide x 39.38" long
|
7.87" to 31"
|
1,100 pounds
|
$3,761.88
|
||
|
31.5" wide x 49.25" long
|
7.87" to 39.37"
|
1,100 pounds
|
$3,822.47
|
||
|
39.37" wide x 49.25" long
|
7.87" to 39.37"
|
1,100 pounds
|
$3,872.97
|
||
|
31.5" wide x 59" long
|
8.62" to 48"
|
1,100 pounds
|
$3,953.76
|
||
|
39.37" wide x 59" long
|
8.62" to 48"
|
1,100 pounds
|
$4,034.55
|
Safety is built in. An aluminum safety bar on the upper platform prevents obstructed descent, and safety clearance between the scissors prevents trapping. Single-acting cylinders have a check valve that stops lowering if a hose bursts, and mechanical block bars secure the table for maintenance. Pivot bushings are self-lubricating and a removable lifting eye is included.
The 1,100 lb rating assumes an evenly distributed load. Lift Products notes that capacity drops by 50% for offset loads and for rolling loads, so size the table for how the load is actually placed. The Guardian can sit on the floor or be installed in a prepared pit, and foot controls are an option. Contact Lift Products for capacity and application requirements on in-floor use.
Product Lines
LPB-10-0 has a 31.5 x 39.38 in. platform and raises from 7.87 to 31 in. (23.25 in. of travel, 9 seconds). LPB-10-1 has a 31.5 x 49.25 in. platform and raises from 7.87 to 39.37 in. (31.5 in. of travel, 11 seconds). LPB-10-2 has a 39.37 x 49.25 in. platform with the same heights and speed. LPB-10-3 has a 31.5 x 59 in. platform and raises from 8.62 to 48 in. (39.375 in. of travel, 15 seconds). LPB-10-4 has a 39.37 x 59 in. platform with the same heights and speed. All five are rated for 1,100 lb, and the base frame is 29.5 in. wide on every model.
Choosing the Right Model
◆ Choose the raised height first: 31 in. (LPB-10-0), 39.37 in. (LPB-10-1 and LPB-10-2) or 48 in. (LPB-10-3 and LPB-10-4).
◆ Match the platform to the load. Widths are 31.5 or 39.37 in. and lengths are 39.38, 49.25 or 59 in.
◆ Check the lowered height (7.87 or 8.62 in.) against your loading method. The lift tables guide notes that a table that will not go below seven inches cannot be loaded by pallet jack, so plan a ramp, a pit or forklift loading.
◆ Look at the Guardian Low Profile LPBL series if you need a lowered height as low as 3.25 in.
◆ Size for offset and rolling loads. Capacity drops by 50% for either one.
◆ Match the lift speed (9 to 15 seconds) to your cycle, and ask about foot controls.
How do rolling loads change the rating you need?
See rolling loads
Where Guardian Series Lift Tables Are Most Commonly Used
Assembly and production workstations, packaging and order fulfillment, and maintenance and service areas.
CustomMHS carries the full line of Lift Products Guardian Series scissor lift tables, backed by the manufacturer’s warranty.