Lift Products Guardian Series Low Profile Scissor Lift Tables

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Platform Size | Travel | Capacity | Price | View Model |
|
31-1/2" wide x 55" long
|
3-1/4" to 34"
|
1,100 pounds
|
$4,696.04
|
||
|
39-1/2" wide x 55" long
|
3-1/4" to 34"
|
1,100 pounds
|
$4,807.12
|
||
|
31-1/2" wide x 55" long
|
3-1/4" to 34"
|
2,200 pounds
|
$5,332.26
|
||
|
31-1/2" wide x 55" long
|
3-1/4" to 34"
|
2,200 pounds
|
$5,392.86
|
||
|
31-1/2" wide x 61" long
|
3-5/8" to 33-1/8"
|
3,300 pounds
|
$7,352.80
|
||
|
39-1/2" wide x 61" long
|
3-5/8" to 33-1/8"
|
3,300 pounds
|
$7,518.70
|
Every Guardian LPBL table has a safety perimeter around the platform that stops the descent on contact, with a reset button in the 24 V control box. A check valve stops the table from lowering if a hose bursts, a relief valve protects against overloading, a compensated flow valve controls the lowering speed, and there is clearance between the scissors to prevent trapping. Mechanical blocks are built in for safe maintenance, the pivot points use self-lubricating bushings, and removable lifting eyes make installation easier. Lift Products states the series meets and exceeds both U.S. (ANSI) and EU safety standards.
The power pack is external and comes with 8 ft hoses. Power is 115 V single phase as standard, with 230/460 V three phase available. Options include ramps, hinged ramps, foot controls and a stainless galvanized version.
Product Lines
The series has six models in three capacities and two platform widths. All models share a 29-1/2" x 52-3/4" base frame. The LPBL-10 (1,100 lb) and LPBL-20 (2,200 lb) models have 55" long platforms, lower to 3-1/4" and raise to 34". The LPBL-30 (3,300 lb) models have 61" long platforms, lower to 3-5/8" and raise to 33-1/8". Each capacity comes in a 31-1/2" wide platform (-1) and a 39-1/2" wide platform (-2).
Selecting the Right Model
◆ LPBL-10-1 (1,100 lb): 31-1/2" x 55" platform, 3-1/4" lowered, 34" raised, 10 second lift.
◆ LPBL-10-2 (1,100 lb): 39-1/2" x 55" platform, 3-1/4" lowered, 34" raised, 10 second lift.
◆ LPBL-20-1 (2,200 lb): 31-1/2" x 55" platform, 3-1/4" lowered, 34" raised, 18 second lift.
◆ LPBL-20-2 (2,200 lb): 39-1/2" x 55" platform, 3-1/4" lowered, 34" raised, 18 second lift.
◆ LPBL-30-1 (3,300 lb): 31-1/2" x 61" platform, 3-5/8" lowered, 33-1/8" raised, 25 second lift.
◆ LPBL-30-2 (3,300 lb): 39-1/2" x 61" platform, 3-5/8" lowered, 33-1/8" raised, 25 second lift.
Can a pallet jack load a Guardian low profile table?
Yes. Every model lowers to less than four inches, which is under the seven inch limit for pallet jack loading. S
ee how lowered height controls loading in the CustomMHS lift table guide.
Where Commonly Used
Guardian low profile tables are commonly used where pallets and wheeled carts are rolled onto the platform from floor level and raised to working height without a floor pit.
CustomMHS carries the full line of Lift Products Guardian Series Low Profile scissor lift tables, backed by the manufacturer’s warranty.