Presto Lifts Light Duty Electric Scissor Lift Tables

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Platform Size | Travel | Capacity | Price | View Model |
|
24" wide x 36” long
|
5-1/4" to 29"
|
1,000 pounds
|
$5,543.01
|
||
|
24" wide x 36" long
|
5-1/4" to 29"
|
1,500 pounds
|
$5,717.62
|
||
|
24" wide x 48" long
|
5-1/4" to 41"
|
1,000 pounds
|
$5,717.62
|
||
|
24" wide x 48" long
|
5-1/4" to 41"
|
1,500 pounds
|
$5,848.55
|
||
|
36" wide x 36" long
|
5-1/4" to 29-1/4"
|
1,000 pounds
|
$6,568.73
|
||
|
36" wide x 36" long
|
5-1/4" to 29-1/4"
|
1,500 pounds
|
$6,721.46
|
||
|
36" wide x 48" long
|
5-1/4" to 41-1/4"
|
1,000 pounds
|
$6,677.84
|
||
|
36" wide x 48" long
|
5-1/4" to 41-1/4"
|
1,500 pounds
|
$6,819.72
|
Each table has an internal 1/3 hp, 115 V single phase power unit rated for intermittent duty, with a hand control pendant as standard. The table powers both up and down, and the control is hold to run, so releasing the button stops the lift. The scissor legs are ½ in. steel plate, the ram cylinders are chrome plated, and a hinged platform gives access to the cylinders. Presto’s manual lists a maximum of 15 cycles per hour and a dedicated circuit of 20 amps or larger.
Selecting a model comes down to platform size and capacity. Pick the capacity from your heaviest load, then pick the width and length that support it. Because these are light duty tables, check how often the table will cycle. A table that lifts more than about once every four minutes will overheat the motor.
Product Lines
The XS and WXS series has four platform sizes. The XS24 has a 24 x 36 in. platform at 5-1/4 to 29 in., in 1,000 lb (XS24-10) and 1,500 lb (XS24-15). The XS36 has a 24 x 48 in. platform at 5-1/4 to 41 in., in 1,000 lb (XS36-10) and 1,500 lb (XS36-15). The WXS24 has a 36 x 36 in. platform at 5-1/4 to 29-1/4 in., in 1,000 lb (WXS24-10) and 1,500 lb (WXS24-15). The WXS36 has a 36 x 48 in. platform at 5-1/4 to 41-1/4 in., in 1,000 lb (WXS36-10) and 1,500 lb (WXS36-15). Presto lists maximum platforms of 36 x 48 and 36 x 60 in. on the XS models and 48 x 48 and 48 x 60 in. on the WXS models.
Selecting the Right Model
◆ Choose the XS (24 in. wide) for tight workstations or narrow loads, and the WXS (36 in. wide) when the load needs a broader surface.
◆ Choose the length by the raised height you need. The 36 in. long XS24 and WXS24 raise to about 29 in., and the 48 in. long XS36 and WXS36 raise to about 41 in.
◆ Rate capacity to your heaviest load, including fixtures and containers. The 1,500 lb models take longer to lift, at 23 to 36 seconds versus 18 to 29 seconds for the 1,000 lb models.
◆ Count the cycles. The motor is intermittent duty, so use a different table for constant lifting. Presto lists optional external power units for higher usage.
◆ Check end and side loads. Presto lists the end and side capacity as equal to the rated capacity on every model.
◆ Use the 5-1/4 in. lowered height to your advantage. It sits below the seven inch threshold the guide gives for pallet jack loading.
Will a pallet jack be able to load the table at its lowered height? The
Lift Table Buying Guide explains why a table that will not go below seven inches cannot be loaded by pallet jack, and why lowered height is the first number to check.
Where Commonly Used
Commonly used at assembly, packaging, and receiving workstations where lighter loads are raised to a comfortable working height.
CustomMHS carries the full line of Presto Lifts XS and WXS light duty electric scissor lift tables, backed by the manufacturer’s warranty.