Presto XZ Series Floor Level Scissor Lift Tables

Prices are shown by manufacturer model number.
Compare the exact same item across competitors - no extra searching.
| Model Number | Platform Size | Travel | Capacity | Price | View Model |
|
44" wide x 48" long
|
3/8" to 35-3/8"
|
2,000 pounds
|
$13,093.27
|
||
|
44" wide x 48" long
|
3/8" to 35-3/8"
|
4,000 pounds
|
$13,725.81
|
||
|
44" wide x 48" long
|
1/2" to 35-3/8"
|
6,000 pounds
|
$21,647.90
|
||
|
50" wide x 48" long
|
3/8" to 35-3/8"
|
2,000 pounds
|
$10,168.54
|
||
|
50" wide x 48" long
|
3/8" to 35-3/8"
|
4,000 pounds
|
$9,200.40
|
||
|
50" wide x 48" long
|
1/2" to 35-3/8"
|
6,000 pounds
|
$21,647.90
|
The CustomMHS lift table guide gives seven inches as the limit for pallet jack loading. At 3/8" to 1/2", the XZ Series is far below that limit, and it is the lowest collapsed height of the Presto tables that CustomMHS carries. The low pan also lets operators reach the load from four sides with minimal reach over.
Each XZ table comes with an external 1 hp, 115 V single phase power unit, a foot or hand-held control, a 6" flexible yellow safety toe guard around the pan and lifting eyes for positioning during installation. Presto lists optional power units and custom designs.
Product Lines
The XZ Series has six models in two pan widths and three capacities. The XZ44 series has a 44" x 48" pan and the XZ50 series has a 50" x 48" pan. Each width is offered at 2,000, 4,000 and 6,000 lb. Overall footprints run from 61-1/4" x 59" to 67-1/4" x 59", and loaded lift times run from 40 to 54 seconds.
Selecting the Right Model
◆ XZ44-20 (2,000 lb): 44" x 48" pan, 3/8" lowered, 35-3/8" raised, 61-1/4" x 59" footprint, 40 second lift.
◆ XZ44-40 (4,000 lb): 44" x 48" pan, 3/8" lowered, 35-3/8" raised, 61-1/4" x 59" footprint, 44 second lift.
◆ XZ44-60 (6,000 lb): 44" x 48" pan, 1/2" lowered, 34-1/2" raised, 65-1/4" x 59" footprint, 54 second lift.
◆ XZ50-20 (2,000 lb): 50" x 48" pan, 3/8" lowered, 35-3/8" raised, 67-1/4" x 59" footprint, 40 second lift.
◆ XZ50-40 (4,000 lb): 50" x 48" pan, 3/8" lowered, 35-3/8" raised, 67-1/4" x 59" footprint, 44 second lift.
◆ XZ50-60 (6,000 lb): 50" x 48" pan, 1/2" lowered, 34-1/2" raised, 67-1/4" x 59" footprint, 54 second lift.
Can a hand pallet truck load a Presto XZ table?
Yes. Every XZ model lowers to 1/2" or less, far under the seven inch limit for pallet jack loading.
See how lowered height controls loading in the CustomMHS lift table guide.
Where Commonly Used
Floor level lift tables are commonly used in receiving, shipping and production areas where pallets are moved by hand pallet truck and need to be raised to working height without a forklift.
CustomMHS carries the full line of Presto XZ Series floor level scissor lift tables, backed by the manufacturer’s warranty.